Instruction/ maintenance manual of the product KA-HD250 JVC
Go to page of 15
KA-HD250 STUDIO ADAPTER STUDIO ADAPTER INSTRUCTIONS KA-HD250 F or Customer Use: Enter below the Serial No. w hich is located on the body . Retain this information for future reference. Model No. KA-HD250 Serial No. LST0445-001A LST0445-001A © 2006 Victor Company of Japan, Limited e_ka250.
2 INTRODUCTION These are general important Safeguards and certain items may not apply to all appl iances. Import ant Safeguards 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product an d in the operating instructions should be adhered to.
3 Safety Precautions (For USA and Canada) CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
INTRODUCTION 4 Safety Precautions (For Europe) This equipment is in conformity with the provision s and protection requirements of the corresponding European Directives.
5 Thank you for purchasing this product. (These instructions a re for: KA-HD250U .) Before operating this unit, read the instruction ma nual care- fully in order to make sure that the best possib le perfor- mance is obtained.
6 INTRODUCTION Operating Precautions • In order to ensure that this unit serves you longer , avoid storing or using in the following. Extremely hot or cold places S trong vi brations Dusty places High humid ity Near loud noise sources • Do not subject this unit to st rong vibration or impact when installing or moving it.
7 Controls, Indicators and Connectors Front Section 1 Viewfinder Holder Use for mounting the VF-P400 4-inch Viewfinder . 2 Lock Lever Fastens the camera to th is unit. X See “Moun ting the Camera” on p age 10. 3 [VF OUTPUT] round 20 -pin Connect the VF-P400 4-inch Viewfinder (sold separately).
8 INTRODUCTION Controls, Indicators and Connec- tors (Cont’d) Rear Section g [T ALL Y] T ALL Y Lamp Lights up red when GY -HD250 is in RECORDING mode. Blinks red when p reparing RECORDING mode and lights up green when in stand-by . h [INTERCOM] Intercom In put T ermina l (XLR 5 Pin) Input terminal for intercom headset.
9 PREP ARA TIONS Basic System z Power is supplied by the Remote Control Unit RM-P210 via th e 26 pin camera cable when in-use. If the Remote Con trol Unit RM-P210 is not in-use, use AC power adapter . MACRO USER 3 USER 2 USER 1 STATUS MENU 2 1 ND FILTER REC OFF ON POWER WHT.
PREP ARA TIONS 10 Inst allation Mounting on a T ripod Use the screw holes on the bottom to mount on a tripod. There are multiple screw holes. Use well -balanced holes to mount to a tripod. Mounting the Cam era Prepare the camera as follows before mounting.
11 Connecting Cables Connect the cables for this device to the ca mera. Connect the cable for this device to the camera terminal. MEMO • T urn off the device before connecting cable s. • Do not touch the plug terminals when connecting. • Insert the DC cable plug all the way in until it locks.
PREP ARA TIONS 12 Connecting to Remote Control Unit RM-P210 Connection Switch off RM-P210 power supply befo re attempting the con- nection. 1. Connecting the RM-G210 Connect this unit’s RM multi-pin connecto r and RM-P210 using the 26 pin came ra cable.
13 Operation 1. T urn the RM-P210 on. T urn the [POWER] switch of the camera remote control unit to [ON]. CALL button lights up green when the power is turned on. After the [POWER] switch is turned on, cam- era remote control unit can be ope rated after about 30 seconds.
PREP ARA TIONS 14 Notes on Operating RM- P210 Some actions are not co mpatible when setting the GY - HD250 with RM-P210 menu opera tions. ( G : Action available ×: No action) *1 When frame rate is 60.
15 OTHERS S pecifications RM Multi-pin connector : Composite video signal output (Either Y/P B /P R , RGB or YC separate output signal can be selected) PROM PTER output: PROMPTER video signal output (.
An important point after buying a device JVC KA-HD250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KA-HD250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KA-HD250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KA-HD250 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KA-HD250 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KA-HD250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KA-HD250.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KA-HD250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KA-HD250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
