Instruction/ maintenance manual of the product JP1514 Jumpking
Go to page of 8
These instructions will detail how to assemble one (1) of the ve (5) sections that make up the frame of the JumpPod® T rampoline. Once you have assembled one section of the frame, you can simply repeat this process to complete additional sections.
The easiest to put the trampoline together is in ve individual sections. Assuming the Pod Connector (Key #4) isn’ t already attached to Key #1, set down the Pod connector . Next is key #1, the top rail with six holes. The pod connector slides onto the end of this top rail.
Next you can slide key #2, the Socket connector with ve spring holes, onto the end of key #1. 3 Note, the support sleeve end of key number two goes onto the open end of key #1, “Underside” “T.
The last step is to attach key #3 to the end of key #2. Now , repeat this step with the other top rails, making a total of ve top rail sections. “Underside” “T op of T ube” Y ou now have assembled one section of top rails.
5 Join the three pieces so that the screw holes line up. W ith a Philips-head screwdriver , screw self tapping screws into the screw holes. Next, you will need to assemble the leg bases. This will require two J-legs and one leg center . These are key #5 and Key #6 in your users manual.
Now insert one end of the leg assembly into the pod connector on one of your top rail sections. 6 Please note that the other end of the leg assembly does not line up with the t-connector . Pull the free end of the leg assembly until it lines up with the t-connector .
7 When all the legs are complete, arrange them on the ground in a circle with the legs facing upwards..
Diagram 1 Diagram 1: Now take two sections of completed legs and ip them over and rotate them 180º. Diagram 2: Next, connect these two sets of legs together at the T -connector of one and the open tube of the other . Diagram 5 : Finally , ip over , rotate, and connect the nal leg set to complete the ring of the trampoline frame.
An important point after buying a device Jumpking JP1514 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jumpking JP1514 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jumpking JP1514 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jumpking JP1514 you will learn all the available features of the product, as well as information on its operation. The information that you get Jumpking JP1514 will certainly help you make a decision on the purchase.
If you already are a holder of Jumpking JP1514, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jumpking JP1514.
However, one of the most important roles played by the user manual is to help in solving problems with Jumpking JP1514. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jumpking JP1514 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
