Instruction/ maintenance manual of the product 550000 Intellinet Network Solutions
Go to page of 78
Network V ideo Server User’ s Guide 1 Network Video Server Model 550000 User ’ s Guide V1.1.
Network V ideo Server User’ s Guide 2 Network V ideo S erver 550000 User Manual Copyright March 2006 FCC Compliance S tatement The user manual or instructio n manual for an intentio nal or unintenti.
Network V ideo Server User’ s Guide 3 Important Notice 1. The NETWORK VIDEO SERVER is not weatherpr oof so that you should be well aware of environment specifications that are included in the manual.
Network V ideo Server User’ s Guide 4 T ABLE OF CO NTENTS PRODUCT OVER VIEW ........... .......... ........... ............ .......... ........... ............ ............ ......... ............ . ........... ......... . 6 A BOUT NETWORK VIDEO SER VER.
Network V ideo Server User’ s Guide 5 H. D YNAMIC D OMAIN N AME S ER VICE (DDNS) ...... ............ ........... ..................... ...................... ........... ...........64 H OW TO USE D YN DNS DDNS SER VER ...... ..................... ..
Network V ideo Server User’ s Guide 6 PRODUCT OVER VIEW About NETWORK VIDEO SER VER The NETWORK VIDEO SER VER is a network CCD camera server with an integrated Internet Server , image c ompressi on device, flash me mory , a nd many other features. No other hardware is necessary for use.
Network V ideo Server User’ s Guide 7 Main Features and Benefit s Convenient Operation The NETWORK VIDEO SER VER is a standalone sy stem with built-in CP U requiring no speci al hardware or software such a s PC frame grabber cards.
Network V ideo Server User’ s Guide 8 Embedded Linux Operating System NETWORK VIDEO SER VER uses an embedded Linux operating sy stem within its 32bit RISC CPU. Linux like other UN IX is one of the most stab le operating system available. Th ere is very little chance of the operating system crashing.
Network V ideo Server User’ s Guide 9 System R equiremen ts Networ k 10Base-T Ethernet or 100B ase TX Fast Ethernet Recommended PC or Notebook to Access the NETWOR K VIDEO SER V ER .
Network V ideo Server User’ s Guide 10 PHYSICAL DESCRIPTION Content s Carefully remove all items from the package. In addition to this U ser ’ s Guide, be certain that you have: N E T W O R K V I .
Network V ideo Server User’ s Guide 11 Front Panel Vi d e o I n p u t : T o input video sign al through a coaxial ca ble V ideo Output : T o outp ut video signal through a coaxial c able. (Roof-through from “V i deo Input” BNC connector) PWR LED (RED): This LED indicates the status of Powe r on and of f.
Network V ideo Server User’ s Guide 12 Rear Panel Power Connector: Only use the AC Adapter provided b y your dealer to avoid any possible damage fro m electric shock .
Network V ideo Server User’ s Guide 13 Installation Overview Installation Summary Connect Ethernet and Power to NET WORK VIDEO SER VER on local network for configuration Insert a program CD .
Network V ideo Server User’ s Guide 14 ASSIGNING IP ADDRESS & ACCESSI NG NETWORK VIDEO SER VER’S HOMEP AGE Access via IP Addresses T o access the NETWORK VI DEO SER VER, you need to assign an appropriate network IP address.
Network V ideo Server User’ s Guide 15 Inst alling NETWO RK VIDEO SE RVER in your Network 1. Connecting with direct cable (Non Crosso ver UTP cable). Used when connec ting the NETWORK VIDEO SER VER to a switch, hub or r outer . 2. Connecting with Crossover UTP Cable.
Network V ideo Server User’ s Guide 16 Inst allation Using Windows IP Inst aller To install an IP address, you should use the IP Installer prov i ded with NETWORK VIDEO SERVER. Note: The MAC Addr ess can be found on th e unders ide label of the NETWORK VIDEO SER VER.
Network V ideo Server User’ s Guide 17 Information on IP Addresses 1. If y ou do not know which IP Address you have to enter in IP INST ALLE R you should as k your Network Administrator for an avail able IP Address.
Network V ideo Server User’ s Guide 18 Assigning IP Address by using Hy per T erminal (Advanced Users only) This chapter is for advanced users only . Normally it is not required to access the camera via Hyper T erminal. The installation via IP INST ALLE R is the preferred method.
Network V ideo Server User’ s Guide 19 ③ Configure bit/sec as 19200 and leave other settings at the default values. ④ The panel shows u p like thus image when configured properly .
Network V ideo Server User’ s Guide 20 Assigning IP Address Follow these steps to assign an IP address using Hyper T erminal 1. Execute “Hyper T erminal” on your PC 2. Connect RS232 Cable to the serial port of PC that you have selected in Chapter 4.
Network V ideo Server User’ s Guide 21 6. Y ou can see Network Configuration while [Boot] Prompt is running by pressing ‘p’ key again. Here, inet on ether net (e), host in et (h) and gatew ay inet (g) values ar e network confi guration values. Y ou should review these values and change accordingly .
Network V ideo Server User’ s Guide 22 Gateway inet (g) is the gateway address of Network Camera 7. T ype ‘c’ key to change the network configuration in [Boot] prompt. If you type ‘c’ key , NETWORK VIDEO SER VER shows y ou the information you can change its values and the current assigned values.
Network V ideo Server User’ s Guide 23 Accessing NETWORK VIDEO SERVER After assigni ng NETWORK VIDEO SER VER a n IP a ddress you may access N ETWORK VIDEO SER VER and monito r real-time image on Internet. Y ou may configure NETWORK VIDEO SER VE R with any standa rd W eb brows er on lo cal or re mote n etwo rk.
Network V ideo Server User’ s Guide 24 1. ID and Password If you key in a user ID an d password, y ou can a ccess the c amera to mon itor real-t ime vide o. W ith administrator ’ s ID and password, you ca n access real-time video with administrator ’ s authority .
Network V ideo Server User’ s Guide 25 Manual installation of Active-X If Active-X program fails to be installed automatically , you may install it manually . The manual installation program is to be do wnloaded by clicking ‘here’ as follows: Note : If you have any proble m when you install ActiveX, visit http://www .
Network V ideo Server User’ s Guide 26 4) Java Applet for Macintosh or Unix/Linux System users and Windows Users who do not use MS Interne t Explor er If you are using Microsoft W indows as the Operating Sy stem and use MS Internet Explorer as the primary web brows er , than there is no ne ed to use the JA V A Applet.
Network V ideo Server User’ s Guide 27 NETWORK VIDEO SER VER Ho mepage Having completed the login procedure, you now see the NETWORK VIDEO SER VER homepage 1. Connected Clie nt It show the number of multi access users. (100 multi users can be accessed simultaneously .
Network V ideo Server User’ s Guide 28 4. Save, S top save, snap shot, sho w only image ① Save, stop save Users can sav e real time im ages from NET WORK VIDEO SER VER on PC. Press ‘save’ button then select f older that you want to save images.
Network V ideo Server User’ s Guide 29 ② Snap Shot T o save only one image, press “snap shot” b utton and then sel ect a folder . Save the image as JPG file. (Default file name de dicate the date an d t i m e ) ③ Show onl y image When you want to see only video panel, Press “show only image”.
Network V ideo Server User’ s Guide 30 CONFIGURING ADMINISTRA TION TOOLS Press “ Administrator Menu”. Y ou can control the configuratio ns of NETWORK VIDEO SE R VER by Ad ministrator ’ s T ool. Only authorized user c an access administrator tool.
Network V ideo Server User’ s Guide 31 Administration Menu’ s Overview The table belo w prov ides a one-step overview o f the Administratio ns T ools: Image Configu ration T o confi gure compr ession rate, i mage size, brightness , contrast, etc .
Network V ideo Server User’ s Guide 32 Image Configuration NETWORK VIDEO SER VER I mage Parameter s 1. V ideo Input Network V ideo Serv er supports two different ty pes of analog vi deo Signals: NTSC and P AL. NTSC is used in the United States m ai nly while P AL is being used across the globe, es pecially in Europe.
Network V ideo Server User’ s Guide 33 3. Image size Y ou may choose the image size VGA (640x480) or QVGA (320x240) and SQVGA (160*120). Large r resolutions g lower frame rates while s mall sizes result in h igher frame rates. 4. V ertical Flip T o turn the image view upsi de down (no eff ect on i mages uploaded via FTP or Email!).
Network V ideo Server User’ s Guide 34 Network Configur ation This screen defines the network type and addr esses of the NETWORK VI DEO SER VER. Here y ou can configur e the Camera’ s IP address, the DNS server, the DDNS Setup and the SMTP Server .
Network V ideo Server User’ s Guide 35 1. Set IP Address, Subnet mask, gateway addr ess. T o set the IP address, Subnet mask, and gateway address manual ly , you may select “manually” in combo box. In case of selecting “ manually”, you can configure them with the IP installer as well as this page.
Network V ideo Server User’ s Guide 36 5. Upgrade p ort number T o set the Port Number for upgrading firmware. De fault port number is “9000” a nd users can select from 8000~65535. 1. PTZ port number (not ap plicable for NETWORK VIDEO SER VER) T o set the po rt number for PTZ control.
Network V ideo Server User’ s Guide 37 5. Use SMTP authenticatio n If you need user authentication for using the SM TP server , check in a box. and enter you ID, Password and Realm for your SMTP server .
Network V ideo Server User’ s Guide 38 User Configuration This screen is used to configure IDs and Passwords for an administrator and up to 5 users. 1. User Account (max. 10 characters) There is one administrator account and 5 user accounts. Account names can be changed.
Network V ideo Server User’ s Guide 39 Event T rigger Configuration NETWORK VIDEO SER VER can perform certain tasks without user interac tion. It can send imag es via Emai l or upload JPG image s to an FTP Server , i.e. an Internet W eb Server or a shared ne twork drive.
Network V ideo Server User’ s Guide 40 1. T rigger Condition This is to select option h o w to send an e vent signal to NETWOR K VIDEO SER VER. ① Activ ation of digi tal inpu t port The NETWORK VID EO SER VER receives an even t signal from exte rnal devices suc h as infrared Sensor Alarm sensor etc.
Network V ideo Server User’ s Guide 41 2. Image capture option This is to configur e image capture option when an event is triggered. ① Before Event Y ou may set the starting tim e to capture image before event is triggered. (Input limitation is from 0 to 21 seconds.
Network V ideo Server User’ s Guide 42 3. T rigger Output Here you define which actio n the c amera is to perf orm when a trigger condition is met. 1. External devices signal ou tput This is to sup ply voltage to output port when events are triggered.
Network V ideo Server User’ s Guide 43 Time Configuration This screen is to configure date and time. 1. Synchronized with NTP server The NETWORK VIDEO SER VE R automatically co nfigures Date & Tim e through the NTP (Network T ime Protocol) server .
Network V ideo Server User’ s Guide 44 System Configuration This screen is used to configure camera name , lo cation, and image sensor oscillator for frequency , PTZ control and System information f or NETWORK VIDEO SER VER . 1. Server name Y ou can enter the Name of your camera here.
Network V ideo Server User’ s Guide 45 4. Direct public access to image via HTTP Controls access to the live image via http command http://camera_address/jpg/image.jpg . This feature can be i mportant when using the V ideo Server in 3 rd party video surveillance systems.
Network V ideo Server User’ s Guide 46 PTZ CONTROL (only for use wi th PTZ CCTV Cameras) This screen is to contr ol PTZ function. This PTZ contr ol box may be activated only if PTZ external devices are co nnected to NETWORK VIDEO SE R VER and configure PT Z control enable in System Con f iguration scr een .
Network V ideo Server User’ s Guide 47 PoE (Power over Ethernet) Support Power over Ethernet uses single Ethernet cable to transmit both power and data.
Network V ideo Server User’ s Guide 48 APPENDIX A. T echnical Specifications Image Resolution: 640x480, 320x240, 160x120 Standard JPEG Compression – 10 levels of compression Networ k 10BaseT Ether.
Network V ideo Server User’ s Guide 49 Appr ovals EMC: FCC Class B, CE EN55022/19 94, EN61000-3-2 & 3: 1995, EN5008 2-1: 1997 Operating T emperature 0 ~ 50 Degrees Centigrade Others Operating St.
Network V ideo Server User’ s Guide 50 B. Frequently Aske d Que stion (F AQ) Asks f or the features 1. What is a Video Ser ver? A Network Video Server is a networ k CCD camera s erver with an integrate d Internet Ser ver , image compression device, fl ash memory , and many other features.
Network V ideo Server User’ s Guide 51 D. In case that you use default account, the administrator may protect the v id eo from the public. 6. How can I use a name instead of the IP address to connec.
Network V ideo Server User’ s Guide 52 14. Can I view a Video Server image from my PDA? Network IP Cameras can now be viewed on most Windows CE, including Pocket PC and Pocket PC 2002, Windows Mobile 2003 and Windows Mobile 2005 devices, such as the Compaq iPAQ, HP Jornada, Dell Axim, Casio Cassiopeia and many other devices.
Network V ideo Server User’ s Guide 53 Symptoms, Possible Caus es and Remedial Ac tions Symptoms P ossible caus es Remedial actions The IP address is already used by another device s 1.
Network V ideo Server User’ s Guide 54 The operating status LED Faulty connecting V erify that the power is well connected Y our NETWORK VIDEO SER VER works locally , but not externally . Firewall protection Router configuratio n incorrect Check the internet firewall with your system mana ger V erify the Ro uter Setup.
Network V ideo Server User’ s Guide 55 D. Utilizing IP Addr esses on Local Netw ork Introduction Access to the Internet is achieved via I nternet IP addresses. Currently , IP addresses are limited. There are 5 classes of networks, and each netw ork contains IP addres ses.
Network V ideo Server User’ s Guide 56 C Cla ss Ne two rk 1. Features of Addresses IP address: The three-digit number in room ‘X4’ is for the Host ID. The number ranges fr om 0 to 255. Among the nu mbers, 0 is used for Network ID , 1 is used for Router IP (Gateway address) and 255 are used f or Broadcast a ddress.
Network V ideo Server User’ s Guide 57 Sub-Network ID: xxx.xxx.xxx.0 Gateway Address: xxx.xxx.xxx.1 Subnet Mask: 255.255.255. 192 Broadcast Address: xxx.xxx.xxx.63 IP Addresses: xxx.xxx.xxx.2 – xxx.xxx.xxx.62 Sub-Network ID: xxx.xxx.xxx.64 Gateway Address: xxx.
Network V ideo Server User’ s Guide 58 Gateway Address: xxx.xxx.xxx.1 93 Subnet Mask: 255.255.255. 192 Broadcast Address: xxx.xxx.xxx.255 IP Addresses: xxx.
Network V ideo Server User’ s Guide 59 E. Up dating Firmware Identify the version of Firmwar e Y ou can identify the version of NETWORK VIDEO SER VER’ s Firmware on Syste m Configuration Page. It is important that you fi rst check on the Firmware version your NETWORK VIDEO SER VER has currently installed.
Network V ideo Server User’ s Guide 60 The Firmware Upgrade Process. The NETWORK VIDE O SER VER can be upgrade d via the LAN or remotel y over the Internet (please see note below). Follow these steps to ins tall a new Firmware: 1. Confir m that the NET WORK VIDE O SER VER is connected to your PC.
Network V ideo Server User’ s Guide 61 F . The I/O Connector The I/O Connector provides t he physical interface to a di gital output, and a single digital photo- coupled input that is used for connecting a vari ety of external alarm devices to the NETWORK VIDEO SER VER; incl uding, IR-se nsors, switches and alarm r elay .
Network V ideo Server User’ s Guide 62 G . RS 232 CABLE & P an/Tilt/Zoom Control The Serial Connector In absence of a local netw ork connectio n, the RS 232 serial connector pr ov ides a physical interface for connecting a PTZ devices or computer to NETWORK VIDEO SER VER.
Network V ideo Server User’ s Guide 63 RI : Ring Indicator Pan/T ilt/Zoom Contr ol Pan/T ilt/Zoo m control interface of NETWORK VIDEO SE R VER is initially set to support RS4 85 .
Network V ideo Server User’ s Guide 64 H. Dynamic Domain Nam e Service (DDNS) Y our intern et Service Provider (ISP) provides you at least one IP address which you use to connect to the Internet. The address you get may be static, meaning it never changes, or dynamic, meaning it’ s likely to change periodically .
Network V ideo Server User’ s Guide 65 How to use ODS DDNS service 1. Get access to ODS homepage (www . ods.org ). 2. In case you didn’t register your ID, you sh ould select ‘RE GISTER’ menu and then register your ID / Password. Otherwise , you just login with registered ID/Password.
Network V ideo Server User’ s Guide 66 If you want to use normal DDNS service among many services, you should fill in the blanks in a check box and then click “Ad d Host” button. ① Host: write name you want. ② Doma in: Selec t domain y ou w ant.
Network V ideo Server User’ s Guide 67 How to use D ynDNS DDNS server 1. Get access to DynDNS Homepa ge (www .dy ndns.org ). 2. In case you didn’t register your ID, clic k “Sign Up Now” a nd then register your ID. Otherwise, you just l ogin with registered ID.
Network V ideo Server User’ s Guide 68 3. Click “Add Host”, and then go to the next page..
Network V ideo Server User’ s Guide 69 5. Enter Domai n name you want and just leav e other items, a nd then Click the “A dd Host” button to register . If you want to know detail of each field, please refer to F AQ of each homep age. 5. Y ou may see this page that s hows setting information.
Network V ideo Server User’ s Guide 70 DDNS registratio n for th e NETWO RK VIDEO S ERV ER 1. Login to the Administrator Menu, then open the NETWORK C ONFIGURA TION Screen. 1. Select the DDNS ser vice ( www .ods.org or www .dyndns.org ). 2. Enter your DDNS Ac count User ID.
Network V ideo Server User’ s Guide 71 I. High Speed Solutions This information is to help y ou access high- speed Inter net services suc h as xDSL or a cable modem connection. However , most high-sp eed Internet Service s provide you with so me external IP addresses, the re are several practical issues that should be considere d.
Network V ideo Server User’ s Guide 72 ROUT ERS AN D FIRE W ALLS Another solution i s to use one of several small routers /firewalls currently availa ble on the market.
Network V ideo Server User’ s Guide 73 J. Reinst ating the Factor y Default Settings This information explains instructions in detail on how to set the default settings in the NETWORK VIDEO SER VER.
Network V ideo Server User’ s Guide 74 Factory default setting Administrator ID: adm in Administrator Password: adm in Guest ID: guest Guest Password: guest IP A ddress: 192.168.1.221 Subnet Mask A ddress: 255.255.255.0 Gateway Address: 192.168.1.1 Server IP Address: 192.
Network V ideo Server User’ s Guide 75 K. Glossary of T erms ActiveX – A co ntrol (or set of rules) used by a browser . ActiveX controls are often download ed and installed automatically as required. ARP – Address Resolution Protocol. A method for finding a host's Ethernet address from its Internet address.
Network V ideo Server User’ s Guide 76 FTP - A client-serve r protoc ol that allows a user on one computer to transfer files to and fro m another comp uter over a TCP/IP netw ork. Also the client pr ogram the user e xecutes to transf er files. It is defined in STD 9, RFC 959.
Network V ideo Server User’ s Guide 77 SMTP – Simple Mail T ran sfer Protocol TCP/IP - Transmission Control Protocol/Internet Pr otocol. W ide-area-networking protocol that makes the Internet work. TCP/IP is used on many networks, including the Internet.
Network V ideo Server User’ s Guide 78 www.intellinet-network.com Copyright 2006.
An important point after buying a device Intellinet Network Solutions 550000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intellinet Network Solutions 550000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intellinet Network Solutions 550000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intellinet Network Solutions 550000 you will learn all the available features of the product, as well as information on its operation. The information that you get Intellinet Network Solutions 550000 will certainly help you make a decision on the purchase.
If you already are a holder of Intellinet Network Solutions 550000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intellinet Network Solutions 550000.
However, one of the most important roles played by the user manual is to help in solving problems with Intellinet Network Solutions 550000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intellinet Network Solutions 550000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
