Instruction/ maintenance manual of the product MD-857 Impex
Go to page of 14
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model MD-857 Retain This Manual for Reference 08-05-09 OWNER'S MANUAL MARCY DIAMOND ELITE OLYMPIC BENCH MD-857 IMPEX ® INC.
TABLE OF CONTENTS BEFORE YOU BE GIN....................................................................................……….. 1 IMPORTANT SAFETY NOTICES ...................................................................……….. 2 HARDWARE PACK ……….
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipm ent. Be sure to read the entire manual before you assemble or operate your machine.
WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Fr ont Stabilizer. If the labe l is missing or illegible, please call customer service at 1-800-999-8899 for repl acement.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. 4.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. 5.
ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten all nuts and bolts until instructed to do so.
STEP 2 (See Diagram 2) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the Leg Developer Support (#13) to t he Front Stabilizer (#14). Secure it with three M10 x 5/8” Allen Bolts (#63) and ¾” Washers (#66). C.) Slide the Sliding Block (#15) onto the Ma in Seat Support (#4).
STEP 3 (See Diagram 3) A.) Attach the holes on the end of the Backrest S upports (#21) to the long pivot on the Sliding Block (#15). Attach the Backrest Board (#26) to the Backrest Supports. Secure it with four M8 x 1 5/8” Allen Bolts (#65) and Ø5 /8” Washers (#67).
STEP 4 (See Diagram 4) A.) Insert the U-shaped Pin (#49) into t he open slot on the Leg Developer Support (#13). Secure it with one M6 x ½” Philips Screw (#47), Ø ½” Washer (#48), and Spring (#50). B.) Attach the Leg Developer (#10) to the Leg Developer Support.
STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#28) to the Arm Curl Stand (#9). Secure it with two M8 x 5/8” Allen Bolts (#64) and Ø 5/8” Washers (#67). B.) Insert the Arm Curl Stand into the t op opening on the Leg Developer Support. Use a M18 Lock Knob (#42) to secure the Stand.
11.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Left Upright Beam 1 2 Right Upright Beam 1 3 Rear Stabilizer 2 4 Main Seat Support 1 5 Cross Brace 1 6 Backrest Adjustment Bar 1 7 Squat Bar Catch 2 8 Rear Diag.
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, fo r a period of two years on the Frame from the date of purchase. This warranty extends onl y to the original purchaser.
An important point after buying a device Impex MD-857 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MD-857 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MD-857 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MD-857 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MD-857 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MD-857, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MD-857.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MD-857. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MD-857 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
