Instruction/ maintenance manual of the product VRC Ice-O-Matic
Go to page of 17
INSTALLATION AND PARTS MANUAL REMOTE CONDENSERS MODELS: VRC Ice-O-Matic 11100 East 45th Av e Denver, Colorado 80239 Part Number 9081245-01 Date 3/08.
*.
Remote Condenser Introduction Page i How To Use This Manual Ice-O-Matic provides this manual as an aid to the service technician in installation a nd maintenance of remote condensers. Do not attempt to perform installation, start-up or maintenance unless you h ave read and fully understand this manual.
Remote Condenser Table of Contents Page ii Introduction Page i T a b l e o f C o n t e n t s Page ii Freight Claim Procedure Page iii W a r r a n t y Page iv General Information Page 1 Installation Gu.
Remote Condenser Freight Claim Procedure Page iii Freight Claims Important! Inspect Promptly This merchandise has been carefully inspected and packed in accordance with the carrier’s packing specifications. Responsibility for safe delivery has been assumed by the carrier.
Remote Condenser Warranty Page iv Ice-O-Matic Parts and Labor Domestic & International L imited Warrant y Mile High Equipment LLC (the “Company”) warr ants Ice-O-Matic brand ice machines, ice .
Remote Condenser General Information Page 1 Condenser Dimensions (Inches) Model Length Width Height Compatible With: VRC1001 29.18 29.50 38.90 ICE0500R4 VRC1061 29.18 29.50 38.90 ICE0605/6R4, EMF1106R2 VRC2061 29.18 29.50 38.90 IC E0805/6/R3, ICE1005/6/7R3, EMF2306R2 VRC2661 29.
Remote Condenser General Information Page 2 Introduction Ice-O-Matic Remote Condenser Systems are comprised of three components. The pre-charged remote condenser, the pre-charged ice maker and the pre-charged line set. The pre-charged line sets are available in 25, 40, 45, 60 or 75 foot line set lengths.
Remote Condenser General Information Page 3 The VRC remote condensers incorporate the mixing valve in the condenser. This configuration allows up to a 100 foot calculated remote line set run. Reference the diagram below to calculate the maximum 100 foot line set run.
Remote Condenser Remote Refrigeration System Page 4 The Remote Refrigeration System is shown in the above diagram. During the freezing cycle, high temperature and high pressure liquid refrigerant is directe d from the condenser through a mixing valve, receiver, liquid line solenoid heat exchanger and a filter drier.
Remote Condenser Component Description Page 5 Mixing Valve (Headmaster, Low Ambient Control Valve) This valve serves as the head pressure regulating valve.
Remote Condenser Installation Page 6 Electrical Connections 1. The icemaker and the remote condenser both require a solid earth ground that meets National, State and Local Codes. 2. Reference the ice machine and condenser date plate for current requirements to determine wire size for electrical hook up.
Remote Condenser Installation Page 7 Support Leg Installation-VRC 1. After removal of the packaging and fasteners, lift the condenser assembly off of the skid. 2. Locate the legs and leg braces attached to the condenser assembly. Cut the wire ties and separate the legs from the condenser.
Remote Condenser Installation Page 8 Vertical Air Flow.
Remote Condenser Installation Page 9 Proper Tubing Routing When installing the discharge and liquid lines from the remote condenser to the icemaker, please use the following guidelines: 1. The remote condenser (#2) should always be installed above the icemaker (#4) as shown with a vertical air flow on page 8.
Remote Condenser Service Parts Page 10 Item Description VRC1001 VRC1061 VRC2061 VRC2661 VRC5061 1 Fan Guard 9131452-01 9131452-01 9131452-01 9131452-01 9131460-01 2 Top Panel 3013222-01 3013222-01 301.
Remote Condenser Service Parts Page 11.
An important point after buying a device Ice-O-Matic VRC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ice-O-Matic VRC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ice-O-Matic VRC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ice-O-Matic VRC you will learn all the available features of the product, as well as information on its operation. The information that you get Ice-O-Matic VRC will certainly help you make a decision on the purchase.
If you already are a holder of Ice-O-Matic VRC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ice-O-Matic VRC.
However, one of the most important roles played by the user manual is to help in solving problems with Ice-O-Matic VRC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ice-O-Matic VRC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
