Instruction/ maintenance manual of the product YY-R5xx IBM
Go to page of 14
ZZ17-W2001-B 1 YY -W2xx Pedest al Server Chassis YY -R5xx 5U Rackmount Server Chassis Installation Guide 2005.04. V ersion B.
ZZ17-W2001-B 2 INDEX 1. Intr oduction 2. Hardwar e Packing List 3. System Installation 3.1.Chassis Open 3.2.Motherboard Installation 3.3.Add-on Card Installation 3.4.CD–ROM D rive/FDD Installation. 3.5.Fixed HDD Cage , HDD Installation 3.6.Instructions for Switches and LED Indicators on front panel 3.
ZZ17-W2001-B 3 1. INTRODUCTION YY -W2 series Server Chassis is designed in compliant with EEB3.0 specification (refer to www .ssiforum.or g ) and A TXV2.1 (refer to www .form factors.org) Mother Board: z YY -W2 is designed for extended A TX (12"x13"), in com pliant with A TX spec, CEB and EEB3.
ZZ17-W2001-B 4 Thermal Solution: z One(1) 120x120mm Cooling Fan is installed, rear mounted z Options of two (2) 60*60*25mm , rear mounted. Switches and LED Indicators on front panel z Power S.
ZZ17-W2001-B 5 2. Hardware Packing List When you unpack your YY -W2 Server Chassis, check that all the items that you ordered are present in good condition. Review the inventory checklist below to be sure that the components and optional components that you ordered are included.
ZZ17-W2001-B 6 3. System Installation 3.1 Chassis Open T o release two (2) screws on the rear side of chassis, pull the side cover with handle. 3.2 Motherboard Installation Check mounting holes of motherboard, to screw the standof fs required to chassis.
ZZ17-W2001-B 7 3.3 PCI Add-on Card Installation Remove the tail gate bracket, install PCI card into motherboard, and screw in bracket to rear window of chassis. The chassis could be optional required A Card Clamp Holder which is used to clamp the Add-on Card for avoiding any popping issue.
ZZ17-W2001-B 8 T o remove the front panel fist, the front panel is snap in chassis with hocks (or/and screw on by 4pcs screws), please screw of f the screws and pull the front panel forward. z T o remove the metal covers (vented panel). z Screw a pair of rails to drive.
ZZ17-W2001-B 9 T o screw off four (4) screws in the front plate of chassis, the HDD cage could be removed from chassis, install HDD into cage. The cooling fan of HDD cage could be easy swap, release two thumb screws in the front of HDD cage, lift of f the fan holder , swap fan and assembly again into cage.
ZZ17-W2001-B 10 3.6 Instructions for Switches and LED Indicators on front panel The switches and led indicato rs on front panel have the functions as following: POWER SW : Push Switch, The system power on/of f, c onnects t o M / B . Reset SW : Push switch, connect to M/B x POWR LED: The system power LED (green), connect to M/B.
ZZ17-W2001-B 11 Optional Intrusion Switch The chassis could be built with intrusion switch, assembly in left side of chassis, when side cover removed the system will alarm for intrusion, if connected.
ZZ17-W2001-B 12 3.9 System Assembly When above steps are done, properly connect all accessories to the system. Then the user can start to install the O/S and required software to the system according to the instruction on the m anual of Motherboard. 4.
ZZ17-W2001-B 13 5. How to change versatile as Rackmount Chassis (5U) 1. T o remove top cover and bottom cover of chassis. 2. Screw in rack bracket and handles T ype A+ SI-0357 x 1 T ype A+ SI-0237 x 2.
ZZ17-W2001-B 14 3. Slide into EIA cabinet.
An important point after buying a device IBM YY-R5xx (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM YY-R5xx yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM YY-R5xx - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM YY-R5xx you will learn all the available features of the product, as well as information on its operation. The information that you get IBM YY-R5xx will certainly help you make a decision on the purchase.
If you already are a holder of IBM YY-R5xx, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM YY-R5xx.
However, one of the most important roles played by the user manual is to help in solving problems with IBM YY-R5xx. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM YY-R5xx along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
