Instruction/ maintenance manual of the product LV-671 IBM
Go to page of 58
L V -671 Mini-ITX Motherboard User ’ s Manual Edition: 1.42 2007/1 1/19.
L V -671 User ’ s Manual 2.
L V -671 User ’ s Manual 3.
L V -671 User ’ s Manual 4 Copyright Copyright © 2003 - 2004. All rig hts reserved. This document is copyrighted and all rights are reserved. The information in this docum ent is subject to change without prior notice to make improvements to the products.
L V -671 User ’s Manual 5 Packing List Please check the package before y ou use this product Hardware: L V-671 Mini-ITX motherboard x 1 Cable Kit: 40-pin A T A100 IDE Cable x 1 26-pin Slim T y pe Fl.
L V -671 User ’s Manual Index 6 Index Chapter 1 <Int roduction> ..................................................................................... 9 1.1 <Product Overview> ..............................................................
L V -671 User ’s Manual Index 7 Chapter 3 <Sys tem Set up> ................................................................................ 37 3.1 <W atchdog T imer Setti ng> ..............................................................
L V -671 User ’s Manual 8 (This Page is Lef t for Blank).
L V -671 User ’s Manual Introduction Product Ov erv i ew 9 Chapter 1 <Introduction> 1.1 <Product Overview> LV-671 is an all-in-one industrial compact Pentium-M level mot herboard based on Mini-ITX form factor at 170 x 170 mm of dimension.
L V -671 User ’s Manual 10 1.2 <Product Specification> General Specification Form Factor Mini-ITX motherboard at 170 x 170 mm (L x W) CPU Package: 478 pin PGA/ 479 pin BGA L2 Cache: 512KB/1MB/.
L V -671 User ’s Manual Introduction Product Spe cification 1 1 Frame Buffer Intel DVMT (Dynamic Video Memory Technology) 2.0 up to 64Mbytes shared w ith system* Display Type CRT and LCD monitors fo.
L V -671 User ’s Manual Product Spe cification 12 Pow er and Environment Power Requirement One external 19V/12V (auto sw itching) DC Adapter connector on rear panel 4-pin onboard 12V P4 4-pin power .
L V -671 User ’s Manual Introduction Component Placement 13 1.3 <Component Placement> 1 x 184-pin DDR266/333 DIMM up to 1GB Intel 855GME (Northbridge) Socket479 For 478-pin PGA Pentium M/Celeron M Onboard DC to DC inverter Intel ICH4 (Southbridge) Intel 82540EM Gigabit LAN REAL TEK A LC655 5.
L V -671 User ’s Manual Block Diagram 14 1.4 <Block Diagram> Intel Pentium M processor with FC-P GA2/FC-BG A2 855GME CRT LCD LV D S 400MHz/533MHz FSB 1 x 184-pin DIMM Up to 1GB DDR266/333 ICH4 A T A PI Devices USB Devices UltraA T A 100 USB2.
L V -671 User ’s Man ual Hardw are Setup Connector Location 15 Chapter 2 <Hardware Setup> This chapter contains the information for inst a llation of hard ware. The install procedure includes jumper settings, CPU and memory installation, fan, I/O and panel connections.
L V -671 User ’s Man ual Hardw are Setup Jumper Reference 16 2.2 <Jumper Reference> Jumper Function JRTC COMS Operate / Clear Setting JLAN LAN1 Enable/Disable JVLCD LCD Panel Voltage Setting J.
L V -671 User ’s Man ual Hardw are Setup Connector Reference 17 2.3 <Connector Reference> 2.3.1 <Internal Connector> Connector Function Remark CPU MicroPGA479 CPU Socket Standard DIMM 18.
L V -671 User ’s Man ual Hardw are Setup CPU Installation 18 2.4 <System Setup> 2.4.1 <CPU Inst allation> The board supports Intel Pentium M/ Cel eron M processor with 400MHz/5 33MHz of .
L V -671 User ’s Man ual Hardw are Setup Memory Inst allation 19 2.4.2 <Memory Inst allation> The board supports one 1 84-pin DDR 266/333 (PC21 00/PC2700) SDRAM up to 1GB of capacity , and supports ECC (Error Correcting Code), unbufferred memory modules.
L V -671 User ’s Man ual Hardw are Setup CPU Cooler Inst allation 20 2.4.3 <CPU Cooler Inst allation> The board accessories come with one CPU cooler , the cooler ’s specification is listed below , please check the installation steps before y ou start.
L V -671 User ’s Man ual Hardw are Setup CMOS Setup 21 2.5 <CMOS Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is ho w to proceed to clear (reset) the CMOS to its default values.
L V -671 User ’s Man ual Hardw are Setup IDE Interface 22 2.6 <IDE Interface> The board supports two IDE interface up to 4 A T API devices, base on Intel ICH4, the IDE interface supports A T A66/100 A T API drives. The IDE1 supports +5V on pin-20 for DOM (Disk on Module), the jumper JDOM can let you select enable/disable this support.
L V -671 User ’s Man ual Hardw are Setup Compact Flash Interface 23 2.7 Comp act Flash Interface The board supports Compact Flash T ype I socket for storage flash disk only , the jumper JCFSEL can let you to setup the flash card operate on secondary mast er or slave mode.
L V -671 User ’s Man ual Hardw are Setup Display Interface 24 2.8 <Display Interface> 2.8.1 <Analog display interface> The board is integr ated with Intel 855G M GMCH chipset built-in Intel E xtreme Graphics 2 with 266 MHz VGA core, 256-bit 3D engine and Intel Dynamic Video Memory up to 64MBytes shared with system memory.
L V -671 User ’s Man ual Hardw are Setup Display Interface 25 Connector: CN_INV Connector: JVLCD Type: 5-pin LVDS Power Header T ype: 3-pin Power select Header Pin Description Pin Description 1 +12V.
L V -671 User ’s Man ual Hardw are Setup Display Interface 26 LCD installing guide: 1. Prepare a panel, inverter and LV-671 . 2. Please check the datasheet of the panel to see the voltag e of the panel, and set the jumper JVLCD to +5V or +3.3V. 3. Prepare a LVDS type LCD cable 4.
L V -671 User ’s Man ual Hardw are Setup Display Interface 27 After setup the devices w ell, you need to select the LCD p anel type in the BIOS. The panel type mapping is list below : BIOS panel type se lection form For 18-bit color For 24-bit color NO.
L V -671 User ’s Man ual Hardw are Setup Audio Interface 28 2.9 <Audio Interface> The board integrates Intel ICH4 with REAL T EK ALC655 codec for AC97 Rev 2.3; it comes with the features below : ● Microsoft WHQL/WLP 2.0 audio compliance ● Softw are selectable for 2-channel/5.
L V -671 User ’s Man ual Hardw are Setup Audio Interface 29 Connector: CN_A UDIO Type: 10-pin (2 x 5) 2.54-pitch header Pin Description Pin Description 1 Line – Right 2 Ground 3 Line – Left 4 MI.
L V -671 User ’s Man ual Hardw are Setup Ethernet Interface 30 2.10 <Ethernet Interface> The board integrates with Intel 82540E M Gigabit controller at the type of 10Base-T/100Base-T X/1000Base- T auto-switching Ethernet with full duplex and IEEE 802.
L V -671 User ’s Man ual Hardw are Setup Power and Fan Connector 31 2.1 1 <Pow er and Fan connector> The board comes with a 4-pin Mini-DIN po wer connector for DC 12V/19V auto-s witching input, it also has one 4-pin P4 additio nal use power conne ctor for internal power supply , you can choose one pf them to meet your application.
L V -671 User ’s Man ual Hardw are Setup Power and Fan Connector 32 Connector: CN_12V Type: 4-pin standard Pentium 4 +12V power connector Pin Description Pin Descriptio n 1 +12V 2 +12V 3 Ground 4 Gr.
L V -671 User ’s Man ual Hardw are Setup GPIO Interface 33 2.12 <GPIO Interface> The board offers 16-bit digital I/O to customiz e its configuration to your control needs. For example, you may configur e the digital I/O to control t he opening and closing of the cash drawer or to sense the w arning signal from a tripped UPS.
L V -671 User ’s Man ual Hardw are Setup Expansiv e Interface 34 2.13 <Exp ansive Interface> The board comes with one slim type PCI slot and one optio nal Mini-AGP or Mini-PCI interface. The slim PCI slot supports up to 2 PCI devices through an optional riser car d.
L V -671 User ’s Man ual Hardw are Setup Sw itch and Indicator 35 2.14 <Switch and Indicator> Connector: JFRNT Type: onboard 14-pin (2 x 7) 2.54-pitch header Function Signal PIN Signal Functio.
L V -671 User ’s Manual 36 (This Page is Lef t for Blank).
L V -671 User ’s Man ual S ystem Setup W atchdog Timer Setting 37 Chapter 3 <System Setup> 3.1 <W atchdog Timer Setting> The watchdog timer makes the system auto-reset while it stops to work for a period. The integrated watchdog timer can be setup as sy stem reset mode by program.
L V -671 User ’s Man ual S ystem Setup A udio Setup 38 3.2 <Audio Setting> The board integrates Intel ® ICH4 with REAL T EK ® ALC655 codec. It can support 2-channel or 5.1 channel sound under s ystem c onfigurati o n. Please follo w the steps below to setup your sound system.
L V -671 User ’s Man ual S ystem Setup Display Device Setup 39 3.3 <Display Device Setup> This chapter shows you how to set up the display device under Windows OS. Before you using y our display device : 1. Check your softw are Before you can use the display device properly , please install the VGA driver .
L V -671 User ’s Man ual S ystem Setup Display Device Setup 40 For advanced display settings, please cli ck Advanced… button and choose Intel(R) Extreme Graphics.
L V -671 User ’s Man ual S ystem Setup Display Device Setup 41 While you entering the Graphics Properties, you w ill see the options below: This opt ion can let you con figure the CRT monitors for C olors, Screen Area (Resolution) and Refresh Rate.
L V -671 User ’s Man ual S ystem Setup Display Device Setup 42 This opt ion can let you con figure the Dual Display for clone mode (same display on two devices) This opt ion can let you con figure t.
BIOS Setup BIOS Setup 43 L V -671 User ’s Manual Chapter 4 <BIOS Setup> The single board computer uses the A ward BIOS for the system configuration. The Award BIOS in the single board computer is a customiz ed version of the industria l standard BIOS for IBM PC AT-compatible computers.
L V -671 User ’s Manual 44 (This Page is Lef t for Blank).
L V -671 User ’s Manual I/O Port Pin Assignment IDE Port 45 Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: IDE1 Type: 40-pin (20 x 2) box header Pin Description Pin Descr.
L V -671 User ’s Manual I/O Port Pin Assignment IDE Port 46 Connector: IDE2 Type: 44-pin (22 x 2) box header Pin Description Pin Descriptio n 1 Reset 2 Ground 3 D7 4 D8 5 D6 6 D9 7 D5 8 D10 9 D4 10 .
L V -671 User ’s Manual I/O Port Pin Assignment Floppy Port 47 A.2 <Floppy Port> Connector: FDD Type: 26-pin connector Pin Description Pin Description 1 VCC 2 INDEX 3 VCC 4 DRV0 5 VCC 6 DSKCHG.
L V -671 User ’s Manual I/O Port Pin Assignment IrDA Port 48 A.4 <IrDA Port> Connector: CN_IR Type: 5-pin header for SIR Ports Pin Description 1 VCC 2 N/C 3 IRRX 4 Ground 5 IRTX A.
L V -671 User ’s Manual I/O Port Pin Assignment Serial Port 49 A.7 < Serial Port > Connector: COM1 Type: 9-pin D-sub male connector on bracket Pin Description Pin Description 1 MDCD1- 6 MDSR1-.
L V -671 User ’s Manual 50 (This Page is Lef t for Blank).
L V -671 User ’s Manual Flash BIOS Flash BIOS 51 Appendix B <Flash BIOS> B.1 <Flash T ool> The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below : ht t p :/ / www.
L V -671 User ’s Manual 52 (This Page is Lef t for Blank).
L V -671 User ’s Manual System Resource I/O A ddress Map 53 Appendix C <System Resource> C.1 <I/O Address Map> Address Range Device x0000 - x000F Direct Memory Access Controller x0010 - .
L V -671 User ’s Manual System Resource I/O A ddress Map 54 x03F8 - x03FF Communication Port (COM1) x0400 - x04BF Motherboard Resource x04D0 - x04D1 Motherboard Resource x0500 - x051F Intel(R) 82801.
L V -671 User ’s Manual System Resource Memory A ddress Map 55 C.2 <Memory Address Map> Range Device x00000000 - x0009FFFF System board extension for ACPI BIOS x000A0000 - x000AFFFF Intel(R) 8.
L V -671 User ’s Manual System Resource System IRQ and DMA Resource 56 C.3 <System IRQ and DMA Resource> C3.1 IRQ IRQ Number Device 0 S y s t e m C l o c k 1 Standard 101/102-Key or Microsoft .
L V -671 User ’s Manual System Resource System IRQ and DMA Resource 57 C3.2 DMA Channel Device 0 (free) 1 (free) 2 Standard Floppy Disk Controller 3 (free) 4 Direct Memory Access Controller 5 (free).
L V -671 User ’s Manual 58 Contact Information Any advice or comment about our pr oducts and service, or anything we can help you please don’t hesitate to contact with us. W e will do our best to support you for your products, project s and business T aiwan Commate Computer Inc.
An important point after buying a device IBM LV-671 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM LV-671 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM LV-671 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM LV-671 you will learn all the available features of the product, as well as information on its operation. The information that you get IBM LV-671 will certainly help you make a decision on the purchase.
If you already are a holder of IBM LV-671, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM LV-671.
However, one of the most important roles played by the user manual is to help in solving problems with IBM LV-671. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM LV-671 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
