Instruction/ maintenance manual of the product DAS16 IBM
Go to page of 27
.
PC-CARD-DAS16/16AO Analog I/O and Digit al I/O Board User ’ s Guide Document Revision 1, April, 2007 © Copyright 2007, Measurement Computing Corporation.
Your new Measurement Computing product comes w ith a fantastic extra — Management committed to your satisfaction! Refer to www.mccdaq.com/execteam.html for the names, titles, and contact inform ation of each key executive at Measurement Computing.
Trademark and Copy right Information TracerDAQ, Universal Library, Harsh Environment Warranty, Measurement Computing Corpor ation, and the Measurement Computing logo are either trademarks or registered trademarks of M easurement Computing Corporation.
Table of Contents Preface About this U ser's Gu ide .......................................................................................................................7 What you will learn from this user's guide .........................
PC-CARD-DAS16/16AO User's Guide Interrupt ............................................................................................................................................................ 22 Counter ....................................
Preface About this User's Guide What you will learn from this user's guide This user's guide explai ns how to install, configure, and use t he PC-CARD-DAS16/16AO so that y ou get the most out of it s analog I/O, digita l I/O and counter features.
Chapter 1 Introducing the PC-CARD-DAS16/16AO Overview: PC-CARD-DAS16/16AO features The PC-CARD-DAS16/16AO is a dat a acquisition and control board for IBM PC compatible com puters with PCMCIA type II sl ots.
PC-CARD-DAS16/16AO User's Guide Introducing the PC-CARD-DAS16/16AO Software features For information on t he features of Insta Cal and the other software i n cluded with your PC-C ARD- DAS16/16AO, refer to the Quick Start Guide that shipped with your device.
Chapter 2 Installing the PC-CARD-DAS16/16AO What comes with your PC-CARD-DAS16/16AO shipment? The following item s are shipped with the PC-CARD-DAS16/16AO. Hardware PC-CARD-DAS16/16AO Additional documentation In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at www.
PC-CARD-DAS16/16AO User's Guide Installing the PC-CARD-DAS16/16AO Unpacking the PC-CARD-DAS16/16AO As with any electronic devi ce, you should take care while handling to avoid dam age from stat ic electricity .
PC-CARD-DAS16/16AO User's Guide Installing the PC-CARD-DAS16/16AO 2. 3. o o Select the Hardware tab and click on the Devic e Manager butt on. Verify that "PCMC IA adapters" is list ed in the Device Manager.
PC-CARD-DAS16/16AO User's Guide Installing the PC-CARD-DAS16/16AO Cabling Measurement C omputing offers two cabl es for connecting the PC-CAR D-DAS16/16AO to a screw-type terminal board or other si gnal conditioning interface board: The CPCC-50F-39 cable: 39 inches (990 mm ) long; com patible with standard 50-pi n screw termi nal products.
PC-CARD-DAS16/16AO User's Guide Installing the PC-CARD-DAS16/16AO Caution! Do not exceed the input specificati ons. There are no socketed or us er serviceable parts in a PC- CARD-DAS16/16AO. Check the specificat ions and input voltages before connecting any signals.
PC-CARD-DAS16/16AO User's Guide Installing the PC-CARD-DAS16/16AO C50FF-x The red stripe ident i fie s pin # 1 50-pin female IDC conne ctor 50-pi n female IDC conn ector 1 2 49 50 2 50 1 49 Figure 8. C50FF- x cable Details on the C50FF-x cable are available on our web site at www.
Chapter 3 Programming and Developing Applications After following the i nstallation i nstructions in Chapte r 2, your board should now be install ed and ready for use.
Chapter 4 Functional Details Analog input resolution and range The 16-bit A/D converter provides a resolut ion of 1/65,536 parts of full scale. The sm allest reading of full scale (1 part in 65,536) is called a Least Significant Bit (L SB). Four different bipol ar ranges are controlled by software: Analog input ranges Bipolar 1 LSB ±10 V 0.
PC-CARD-DAS16/16AO User's Guide Functional Details After a conversion is m ade, the sample is stored in a 4096-word (sampl e) FIFO buffer from which i t may be retrieved one sample at a time or i n blocks via REP-INSW transfers.
Chapter 5 Specifications Typical for 25 °C unless otherwise specified. Specifications in italic text are guaranteed by design. Analog input Table 1. Analog input specifications A/D converter type AD976A Resolution 16 bits Number of channels 16 single-ended / 8 differential, software selectable Input ranges ±10 V, ±5 V, ±2.
PC-CARD-DAS16/16AO User's Guide Specifications Table 3. Calibrated accuracy specifications le 3 Range Gain Error Offset Error DLE (Note 1) ILE (Note 1) ±10.00 V ±3 max ±1.5 max -1.0, +1.75 max ± 2.0 max ±5.000 V ±3 max ±1.5 max -1.0, +1.75 max ± 2.
PC-CARD-DAS16/16AO User's Guide Specifications Analog output Table 6. Analog output specifications D/A converter type LTC1655 Resolution 16 bits Number of channels 2 Configuration Voltage output, single-ended Output range ±10 V D/A pacing Software Data transfer Programmed I/O Throughput System dependent.
PC-CARD-DAS16/16AO User's Guide Specifications Double buffered output latches Coding: Offset Binary (0 code = -FS, 65535 code = +FS) Miscellaneous Output voltage on power up and reset: -10 V (-FS) Digital input/output Table 9.
PC-CARD-DAS16/16AO User's Guide Specifications Counter Table 11. Counter specifications Counter type 82C54 Configuration 3 down counters, 16 bits each Source: Programmable external (Ctr 1 Clk) or.
PC-CARD-DAS16/16AO User's Guide Specifications Environmental Table 14. Environment al specifications Operating temperature range 0 to 70 °C Storage temperature range -40 to 100 °C Humidity 0 to 95% non-condensing Mechanical Table 15. Mechanical specifications Card dimensions PCMCIA type II: 85.
PC-CARD-DAS16/16AO User's Guide Specifications Table 18. 16-channel Single-ended mode pin out Pin Signal Name Pin Signal Name 1 AGND 26 DGND 2 CH0 IN 27 DIO0 3 CH8 IN 28 DIO1 4 CH1 IN 29 DIO2 5 C.
Declaration of Conformity Manufacturer: Measurement C omputing Corporat ion Address: 10 Commerce Way Suite 1008 Norton, MA 02766 USA Category: Elect rical equipm ent for measurem ent, control and laboratory use.
Measurement Computing Corporation 10 Commerce Way Suite 1008 Norton, Massachusetts 02766 (508) 946-5100 Fax: (508) 946-9500 E-mail: info@mccdaq.com www.
An important point after buying a device IBM DAS16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM DAS16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM DAS16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM DAS16 you will learn all the available features of the product, as well as information on its operation. The information that you get IBM DAS16 will certainly help you make a decision on the purchase.
If you already are a holder of IBM DAS16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM DAS16.
However, one of the most important roles played by the user manual is to help in solving problems with IBM DAS16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM DAS16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
