Instruction/ maintenance manual of the product 37L1423 IBM
Go to page of 18
Serial I/O SST16P DB and RJ Adapter 37L1415 and 37L1423 Installation Guide 37L1477 560155/A October 1998 OPTIONS by IBM 560155_A.p65 11/25/98, 6:56 PM 1.
IBM Serial I/O SST-16P Installation Guide 2 Figure 1. Serial I/O SST16P Adapter Overview IBM Serial I/O Adapters are intelligent, high-speed (up to 230.4 kbps on each port) Multiport Boar ds providing high performance serial I/O solutions for PCI bus systems.
IBM Serial I/O SST-16P Installation Guide 3 Installation Note: Please refer to the user manual that came with your personal computer for detailed installation instructions. Use the following procedure to install your Serial I/O Adapter Card: 1. Set the host computer system power switch to OFF and disconnect the power cord.
IBM Serial I/O SST-16P Installation Guide 4 Figure 4. SST-16P RJ Connector Panel Pin-outs Connector Panels (continued) Figure 2. SST-16P (37L1423) and SST-16P (37L1415) Connector Panels Figure 3.
IBM Serial I/O SST-16P Installation Guide 5 Port to Device Cabling The following six figures show how to pin-out your own cables to go between CP-16 Connector Panel (CP) ports and your T erminals, Printers, Modems, etc.
IBM Serial I/O SST-16P Installation Guide 6 DB-25 Connector Panel to Device Cabling ( continued) RJ-45 Connector Panel to Device Cabling Figures 8 through 10 show the pin-outs required to make a cable to go between CP16 RJ-45 CP ports and your terminals, printers, modems, etc.
IBM Serial I/O SST-16P Installation Guide 7 RJ-45 Connector Panel to Device Cabling (continued) Figure 9. Cable Pin-Outs for CP-16 RJ-45 to PC (DB-9) Figure 10.
IBM Serial I/O SST-16P Installation Guide 8 Help and Service Information Before calling, please prepare for your call by following these steps: Preparing for the Call To assist the technical support representative, have available as much of the following information as possible: • Computer manufacturer and computer model.
IBM Serial I/O SST-16P Installation Guide 9 S N O I T P O M B I t r a P M B I r e b m u N s r e t p a d A O / I l a i r e S I C P 4 1 4 1 L 7 3r e t p a d A B D P 8 T S S O / I l a i r e S 5 1 4 1 L 7.
IBM Serial I/O SST-16P Installation Guide 10 Product W arranty The following warranty information applies to products purchased in the United States, Canada, and Puerto Rico. For warranty terms and conditions for products purchased in other countries, see the enclosed W arranty insert, or contact your IBM reseller or IBM marketing representative.
IBM Serial I/O SST-16P Installation Guide 11 1) for certain Machines, the designated, serial-numbered Machine and 2) at an engineering-change level compatible with the feature, conversion, or upgrade. Many of these transactions involve the removal of parts and their return to IBM.
IBM Serial I/O SST-16P Installation Guide 12 least functionally equivalent to the item replaced. The replacement assumes the warranty service status of the replaced item. Before IBM or your reseller exchanges a Machine or part, you agree to remove all features, parts, options, alterations, and attachments not under warranty service.
IBM Serial I/O SST-16P Installation Guide 13 Limitation of Liability Circumstances may arise where, because of a default on IBM’ s part or other liability you are entitled to recover damages from IBM.
IBM Serial I/O SST-16P Installation Guide 14 Electronic Emission Notices Federal Communications Commission (FCC) Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
IBM Serial I/O SST-16P Installation Guide 15 560155_A.p65 11/25/98, 6:56 PM 15.
IBM Serial I/O SST-16P Installation Guide 16 560155_A.p65 11/25/98, 6:56 PM 16.
IBM Serial I/O SST-16P Installation Guide 17 560155_A.p65 11/25/98, 6:56 PM 17.
IBM Serial I/O SST-16P Installation Guide 18 © 1998 IBM. All rights reserved. Reproduction without permission prohibited. IBM makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
An important point after buying a device IBM 37L1423 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM 37L1423 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM 37L1423 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM 37L1423 you will learn all the available features of the product, as well as information on its operation. The information that you get IBM 37L1423 will certainly help you make a decision on the purchase.
If you already are a holder of IBM 37L1423, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM 37L1423.
However, one of the most important roles played by the user manual is to help in solving problems with IBM 37L1423. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM 37L1423 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
