Instruction/ maintenance manual of the product HSK074HD Husky
Go to page of 12
1 AUTOMA TIC BA TTER Y CHARGER OWNER’S MANUAL & W ARRANTY INFORMA TION 12 VOL T 2/10 AMPERE WITH 55 / AMPERE ST AR T ASSIST HSK074HD • IMPOR T ANT SAFETY INSTRUCTIONS • GENERAL BA TTER Y SAFETY : 1. Use charger for charging a LEAD-ACID batter y only .
2 PERSONAL PRECAUTIONS AND SAFETY 1. Someone should be within range of your voice or close enough to come to your aid when you work near a lead-acid batter y . 2. Have plenty of fresh water and soap nearby in case batter y acid contacts skin, clothing, or eyes.
3 PREP ARING TO CHARGE 1. Determine voltage of batter y by referring to car owner's manual and make sure that output voltage selector switch is set at correct voltage. 2. If it is necessar y to remove batter y from vehicle to charge, or to clean terminals, always remove grounded terminal from batter y first.
4 INTRODUCTION AND FEA TURES Thank you for selecting the Husky® Model HSK074HD 2/10/55 Batter y Charger . With proper care and use, it will give you years of dependable ser vice. Please read all safety warnings and cautions, and this entire User's Manual, before using this device.
5 CHARGE RA TE SELECTOR SWITCH FIGURE 3 • The sliding selector switch on the front panel of the charger offers two Charge Rates for charging various types of batteries and a Start position to assist star ting engines. • Select the correct switch position BEFORE connecting the charger to a battery or AC power source.
6 CIRCUIT BREAKER This batter y charger has an internal self-resetting circuit breaker that protects the charger from temporar y over- loads. When it operates it makes a clicking sound. Y ou will see the ammeter reduce to zero when the breaker is open.
7 CHARGING IF BA TTER Y IS OUTSIDE OF VEHICLE Set charger's Charge Rate Selector switch to appropriate setting according to batter y size. Make sure the Charge/ Star t switch is in the Charge position.
8 CARE AND MAINTENANCE With only minimal maintenance, the Husky 2/10/55 Batter y Charger will deliver years of dependable ser vice. Follow these simple steps to maintain the charger in optimum condition: • After each use, clean the batter y charger clamps - be sure to remove any batter y fluid that will cause corrosion of the copper clamps.
9 APPENDIX A — CHARGING TIMES T o calculate the approximate charging time required to fully charge a batter y , it is necessar y to determine the specific gravity (or , percent of batter y charge) using a hydrometer . Use this technique if batter y vent caps can be removed.
10 W ARRANTY : HUSKY 2 YEAR LIMITED W ARRANTY PROGRAM The Home Depot warrants this Husky Power Product to the original user to be free from defects in material and workmanship for a period of two years from the date of purchase.
11.
12 © 2002 HUSKY PROFESSIONAL TOOLS • MADE IN CHINA.
An important point after buying a device Husky HSK074HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husky HSK074HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husky HSK074HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husky HSK074HD you will learn all the available features of the product, as well as information on its operation. The information that you get Husky HSK074HD will certainly help you make a decision on the purchase.
If you already are a holder of Husky HSK074HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husky HSK074HD.
However, one of the most important roles played by the user manual is to help in solving problems with Husky HSK074HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husky HSK074HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
