Instruction/ maintenance manual of the product NC6133 HP (Hewlett-Packard)
Go to page of 7
Models Models Models Models Compaq NC6132 1000 SX Upgrade Module for NC3134 and NC3131 338456-B23 With this Gigabit upgrade module for the NC3134 or NC3131 Fast Ethernet adapters, Compaq has the only industry-standard, scalable transition path from Ethernet to Fast Ethernet to Bonded Fast Ethernet to short haul fiber Gigabit.
32-/64-bit Bus-mastering 32-/64-bit Bus-mastering 32-/64-bit Bus-mastering 32-/64-bit Bus-mastering The NC6132 offers the highest data transfer method available between a network and a server for high performance and low CPU utilization.
Plug and Play Plug and Play Plug and Play Plug and Play Fully compliant with the 2.1 PCI specification, the NC6132 uses the system resources to automatically configure its memory and interrupt settings.
Network Fault Tolerance (NFT) Network Fault Tolerance (NFT) Network Fault Tolerance (NFT) Network Fault Tolerance (NFT) The Network Fault Tolerance feature of the NC6132 ensures that the server can always keep an active link.
Standards-based Standards-based Standards-based Standards-based The NC6132 supports the following Compaq Management tools and industry network management standards: Compaq Insight Manager Compaq Insight Manager XE SNMP DMI 2.
General Specifications General Specifications General Specifications General Specifications Communications Processor On-board memory Data path Interrupt levels Bus architecture Connector Wavelength Di.
Software Feature Software Feature Software Feature Software Feature Support by Operating Support by Operating Support by Operating Support by Operating System System System System FEATURE FEATURE FEATURE FEATURE Windows Windows Windows Windows 2000 2000 2000 2000 Windows Windows Windows Windows NT 4.
An important point after buying a device HP (Hewlett-Packard) NC6133 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) NC6133 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) NC6133 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) NC6133 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) NC6133 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) NC6133, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) NC6133.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) NC6133. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) NC6133 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
