Instruction/ maintenance manual of the product HP NC150T HP (Hewlett-Packard)
Go to page of 17
HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide June 2007 (Third Edition) Part Number 367256-00C.
© Copyright 2004 - 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statem ents accompan ying such products and services.
Contents About This Guide Technician Notes ............................................................................................................... ............................ v Where to Go for Additional Help .................................
Contents UTP Cable Sp ecifications ......................................................................................................................... C-2 Using UTP Category 5 Cable in Giga bit over Copper Installations..........................
About This Guide Use this guide for installing the HP ProLia nt NC 150T PCI 4-port Gigabit Combo Switch Adapter. WARNING: To reduce the risk of personal in jury from electric shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment.
About This Guide vi HP NC15 0T PCI 4-port Gigabit Combo Switch Adapter User Guide Where to Go for Additional Help HP updates networking software frequently to include new functionality and features. Complete the following steps to get the latest drivers, firmware, and documentation.
HP NC150T PCI 4-port Gigabit Combo Switch Adapter Us er Guide 1-1 1 Introduction Adapter Overview The HP NC150T PCI 4-port Gigabit Combo Switch Adapter is a 32-bit/66MHz, PCI, Ethernet adapter and a 4-port Gigabit Laye r 2 Unmanaged Ethernet Switch. This device provides an on-board connection between the Et hernet controller and the Gigabit switch.
Introduction 1-2 HP NC150T PCI 4-port Giga bit Combo Switch Adapter User Guide Figure 1-1: RJ-45 por t and LED locations Table 1-1: 10/100/1000 LED Operatio ns for the NC150T PCI 4-port Gigabit Combo Switch Adapter LED Display Description On 10/100 Mb link to the network is established.
2 Installing the Adapter Overview This chapter describes installation precautions and explains how to install the adapter. It also describes how to connect the network cable.
Installing the Adapter Installing the Adapter in a Server Refer to the HP ProLiant server documentati on for additional information on how to safely install a PCI card in the server.
Installing the Adapter HP NC150T PCI 4-port Gigabit Combo Switch Adapter Us er Guide 2-3 Connecting the Network Cable IMPORTANT: Do not connect more than one NC150T PCI 4-port Gigabit Combo Switch Adapter p ort to any single other switch model.
A Regulatory Compliance Notices Federal Communications Commissions Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory Compliance Notic es For questions regarding your product, contact: Hewlett-Packard Company P. O. Box 692000, Mail Stop 5 30113 Houston, Texas 77269-2000 Or, call 1-800- 652-6672 For continuous quality impr ovement, calls may be recorded or monitored.
Regulatory Compliance Notic es HP NC150T PCI 4-port Gigabit Combo Switch Adapter Us er Guide A-3 European Union Notice Products bearing the CE marking comply with the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
B Electrostatic Discharge Overview To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharg e of static electricity from a finger or other conductor may damage system boards or other st atic-sensitive devices.
C Specifications NC150T PCI 4-port Gigabit Combo Switch Adapter Specifications Table C-1: NC150T PCI 4-port Gigabi t Combo Switch Adapter Specificatio ns Specification Description Network Controller Chipset Broadcom® 5705KFB Bus Type PCI Bus Width 32 bits Bus Speed 33 or 66 MHz Standards Supported by NIC IEEE 802.
Specifications C-2 HP NC150T PCI 4-port Gigabit Comb o Switch Adapter User Guide • • • UTP Cable Specifications For 1000BASE-T transmission, the cable must be: Category 5 UTP or better 22-26 AWG.
An important point after buying a device HP (Hewlett-Packard) HP NC150T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) HP NC150T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) HP NC150T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) HP NC150T you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) HP NC150T will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) HP NC150T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) HP NC150T.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) HP NC150T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) HP NC150T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
