Instruction/ maintenance manual of the product 6700 SERIES HP (Hewlett-Packard)
Go to page of 19
COMSPHERE 6700 SERIES NETWORK MANAGEMENT SYSTEM MUL TIUSER FEA TURE USER’S GUIDE Document No. 6700-A2-GB21-20 February 1998.
Printed on recycled paper A 6700-A2-GB21-20 February 1998 Copyright 1998 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protected by federal copyright law .
i 6700-A2-GB21-20 February 1998 Contents About This Guide Document Purpose and Intended Audience iii . . . . . . . . . . . . . . . . . . . . . . . . . Document Summary iii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iii 6700-A2-GB21-20 February 1998 About This Guide Document Purpose and Intended Audience This guide describes how to install and use the COMSPHERE 6700 Series Network Management System (NMS) Multiuser feature.
About This Guide iv 6700-A2-GB21-20 February 1998 Pr oduct-Related Documents Document Number Document Title 3000-A2-GA31 COMSPHERE 3000 Series Carrier , Installation Manual 3610-A2-GB46 COMSPHERE 3600.
About This Guide iv 6700-A2-GB21-20 February 1998 Pr oduct-Related Documents Document Number Document Title 3000-A2-GA31 COMSPHERE 3000 Series Carrier , Installation Manual 3610-A2-GB46 COMSPHERE 3600.
1-1 6700-A2-GB21-20 February 1998 Intr oduction 1 What is the Multiuser Featur e? The COMSPHERE 6700 Multiuser feature gives you the ability to connect multiple Windows workstations together to form a network of NMS users.
Introduction 1-2 6700-A2-GB21-20 February 1998 Sample Multiuser Network T opologies When using the Multiuser feature, one workstation must be configured as the NMS server where the NMS database resides and the control channels are connected. The server is also the point of interface with all NMS devices.
Introduction 1-3 6700-A2-GB21-20 February 1998 Figure 1-2. Multiuser Serial Network (Using SLIP and/or PPP) Figure 1-3. Multiuser Serial Gateway or Ethernet Modem (Using SLIP and/or PPP).
Introduction 1-4 6700-A2-GB21-20 February 1998 Multiuser Featur e Package Contents The Multiuser feature package includes the following: Server: Multiuser server software on one or more 3 1/2 ″ .
2-1 6700-A2-GB21-20 February 1998 Installation 2 Hardwar e Requirements The following are the hardware requirements for installation of the Multiuser feature server and client software: Server 486.
Installation 2-2 6700-A2-GB21-20 February 1998 This configuration is sufficient for a network of 1–512 local and remote devices. If the number of devices increases, use the following table as a guid.
Installation 2-3 6700-A2-GB21-20 February 1998 Supported Network Adapters T o use the Multiuser feature on Ethernet, T oken Ring, or FDDI, you must install a supported network adapter board.
Installation 2-4 6700-A2-GB21-20 February 1998 T able 2-1. Support Network Adapter Boards (2 of 2) Interface Modem V endor T oken Ring IBM 16/4 T oken Ring Adapter Xircom All PT Models Madge Smart 16/.
Installation 2-5 6700-A2-GB21-20 February 1998 Installation W orksheet Before installing and configuring the Multiuser feature, you need some system and network information. Use the following form to collect the necessary information before you start the installation process.
Installation 2-6 6700-A2-GB21-20 February 1998 Installing the Multiuser Featur e T o install the Multiuser feature server or client software, start from the Program Manager window . NOTE: NMS is designed to be the primary application program running on a personal computer .
Installation 2-7 6700-A2-GB21-20 February 1998 7. Choose Y es. The Destination Directory window appears. The Destination Directory window allows you to place the NMS software into a specific directory . A single directory within a single partition is required.
Installation 2-8 6700-A2-GB21-20 February 1998 This window displays a bar indicating the percentage of completion for the current installation. In addition, the names of the files being installed appear above the bar until the installation is complete.
IN-1 6700-A2-GB21-20 February 1998 Index C client hardware requirements, 2-2 package contents, 1-4 E Ethernet, supported network adapters, 2-3 Ethernet modem, sample topology , 1-3 F FDDI, supported n.
An important point after buying a device HP (Hewlett-Packard) 6700 SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 6700 SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 6700 SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 6700 SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 6700 SERIES will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 6700 SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 6700 SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 6700 SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 6700 SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
