Instruction/ maintenance manual of the product 5991-6764 HP (Hewlett-Packard)
Go to page of 8
HP C lu st er P latf or m c–C las s Blade Ca ble Managemen t Br ac k et Ins tallati on Gui de *5991-6764* Prin ted in the US HP P art Number: 5 99 1 -6 7 64 P ublished: October 2006.
© Copyright 2006 Hewlett-P ackard Development Company , L.P . The information contained herein is subject to change without notice. The only w arranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
1 Pr epar ing f or Inst allati on A udie nce This guide is intended for HP service representatives and other persons trained to install hardw are options in HP 10000–series racks. Such persons are expected to understand the hazards of w orking in this environment and to take suitable precautions to minimize danger to themselves and others.
The fasteners specified in T able 1-1 “Fasteners” are required to secure the bracket to the rack columns. These fasteners are provided with HP 10000–series racks. T able 1 - 1 Fasteners Description T orque Format Size Qty . Cage nut for M6 machine screw .
2 Ali gning the Br ac k et Figure 2-1 “Bracket Orientation” shows the correct orientation of the cable management bracket which you must install before connecting the cables to the InfiniBand switch module.
T able 2- 1 Br acket Mount Locations Fastener Cut-out Bracket Hook Cut-out Relativ e U Location InfiniBand Sw itch Module B ay Middle cutout. T op cutout. 4th U down from the top of the blades enclosure. Bay 3 and 4. T op cutout of the next U location below (5th).
3 Inst alling and U sing the Br ac k et One bracket is required for each 8–port InfiniBand switch module, typically installed in bays 3 and 4 of the c-Class server blade enclosure in HP Cluster Platform. When installed, the bracket occupies less than 1U (1.
Figur e 3- 2 Cables Installed It is not normally necessary to dismantle or remove the bracket in order to perform any service operations on the blades enclosure, such as replacing InfiniBand switch modules. However , if you need to remove the bracket, use the following procedure: 1.
An important point after buying a device HP (Hewlett-Packard) 5991-6764 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 5991-6764 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 5991-6764 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 5991-6764 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 5991-6764 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 5991-6764, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 5991-6764.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 5991-6764. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 5991-6764 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
