Instruction/ maintenance manual of the product 3C900 HP (Hewlett-Packard)
Go to page of 40
Etherlink XL PCI Network Interface Card 3C900 Installation Guid e.
Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.
1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media.
1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.
2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media.
2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) .
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2.
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer .
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version 3.11 4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver.
4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) .
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2.
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 25 Set your IP address information in the “TCP/IP Configuration” dialog box, and click “OK”.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0.
.
Version Number 3C900 Rev. 1.
An important point after buying a device HP (Hewlett-Packard) 3C900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) 3C900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) 3C900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) 3C900 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) 3C900 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) 3C900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) 3C900.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) 3C900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) 3C900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
