Instruction/ maintenance manual of the product N321IX Hotpoint
Go to page of 9
3 GB Index Operating principle, 4 User’ s instructions Installation, 4 Use, 4 Maintenance, 6 Installater’ s instructions Installation, 8 Positioning, 8 Electrical connection, 8 Assistance, 10 THIS APPLIANCE IS CONCEIVED FOR DOMESTIC USE ONL Y .
4 GB User’ s Instructions If star ting with the “+” button, the cooking level changes from “0” to “4”. If star ting with the “-“ button, the cooking level changes from “0” to “9”.
5 GB switched off. - The display and the selected timer LED flash alternating the cooking level fr om “00” to “H”, if there is residual heat. - The war ning alarm lasts for at least 2 minutes if the user does not switch it off befor e. - The alarm signal switches of f after the 2 minutes is up or if any button is pushed.
6 GB Maintenace (Fig. 4) By means of a scraper immediately remove any alluminium foil bits, food spills, grease splashes, sugar marks and other high sugarcontent food from the surface in order to avoid damaging the hob. Subsequently clean the surface with some paper towel and SIDOL or ST ANFIX, rinse with water and dr y by means of a clean cloth.
7 GB 2 1 7 8 8 9 5 3b 4 6 5 3a 4 2 1 Fig.4 1. cooking zone Ø 160/1400W 2. cooking zone Ø 200/2300W 1. On/Off 2. Child safety (key lock) 3. Cooking zone indication 4.
8 GB Installer’ s Instructions Installation These Instructions are for the qualified technician, as a guide to installation, adjustment and maintenance, according to the Iaws and standards in force. These operations must aIways be carried out when the appliance has been disconnected fr om the eIectric system.
9 GB INDUZIONE INDUCTION INDUCTION )NDUKTION INDUCCIØN INDUCTIE INDUÎÍO aria - air - air - Luft - aire - lucht - ar 100 cm 2 MIN. induzione - induction - induction - Induktion - inducción - inductie - indução aria - air - air - Luft - aire - lucht - ar 100 cm 2 MIN.
10 GB The manuf acturer declines all responsibility for possible inaccuracies contained in this pamphlet, due to pr inting or cop ying errors. We reser ve the right to make on our own products those changes to be considered necessar y or useful, without jeopardizing the essential characteristics.
11 Notes.
An important point after buying a device Hotpoint N321IX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint N321IX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint N321IX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint N321IX you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint N321IX will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint N321IX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint N321IX.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint N321IX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint N321IX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
