Instruction/ maintenance manual of the product GE640TX Hotpoint
Go to page of 16
HOB GE640X GE640TX GE641TX Contents Installation, 2-5 Positioning Gas connection Burner and nozzle specifications Data plate Electrical connection, 6 Description of the appliance, 7 Overall view Start.
GB 2 ! The installation instructions for cooking ranges shall include a recommendation that such appliances should not be placed adjacent to a door access to minimise the likelihood of persons using the door making contact with pans on the hob surface.
GB 3 Hook fastening diagram Hooking position Hooking position for top H=20 mm for top H=30 mm Front Hooking position Back for top H=40 mm ! Use the hooks contained in the accessory pack Where the hob is not installed over a built-in oven, a wooden panel must be installed as insulation.
GB 4 Setting the burners to minimum: 1. Turn the tap to the low flame position. 2. Remove the knob and adjust the adjustment screw, which is positioned in or next to the tap pin, until the flame is small but steady.
GB 5 Burner and nozzle specifications T able 1 Liquid Gas Natural Gas Burner Diameter (mm) Thermal Power kW (p .c.s .* ) Thermal Power kW (p .c.s .* ) By-pass 1/100 (mm) Nozzle 1/100 Flow* g/h Thermal Power kW (p .c.s .* ) Nozzle 1/100 Flow* g/h Red. Nom.
GB 6 Electrical Connection Power supply voltage and frequency: 220-240V a.c. 50/60Hz. ! The supply cable must be positioned so that it never reaches at any point a temperature 50°C higher than the room temperature. The cable must be routed away from the rear vents.
GB 7 Description of the appliance Overall view SAFETY DEVICES * Ignition for GAS BURNERS * * Only available on certain models. GAS BURNERS differ in size and power. Use the diameter of the cookware to choose the most appropriate burner to cook with.
GB 8 ! The position of the corresponding gas burner is shown on every knob. Gas burners Each burner can be adjusted to one of the following settings using the corresponding control knob: Off Maxim.
GB 9 Precautions and tips ! This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. General safety This is a class 3 built-in appliance.
GB 10 Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Cleaning the appliance ! Do not use abrasive or corrosive detergents such as stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair.
GB 11 Troubleshooting It may happen that the appliance does not function properly or at all. Before calling the service centre for assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open.
GB 12 After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer.
GB 13 Guarantee 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturers guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase.
GB 14 Notes.
GB 15 Notes.
GB 16 Notes 09/2005 - 195053075.01 XEROX BUSINESS SERVICES.
An important point after buying a device Hotpoint GE640TX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint GE640TX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint GE640TX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint GE640TX you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint GE640TX will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint GE640TX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint GE640TX.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint GE640TX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint GE640TX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
