Instruction/ maintenance manual of the product HGH 640 B Hoover
Go to page of 11
HOBS USER INSTRUCTIONS ❐ HGD 640 SGH ❐ HGD 750 X ❐ HGD 640 GH ❐ HGD 750 SGH ❐ HGH 640 SX ❐ HGD 750 GH ❐ HGH 640 X ❐ HGH 640 SW ❐ HGH 640 W ❐ HGH 640 SB ❐ HGH 640 B HOOVER.
1 TECHNICAL CHARA CTERISTICS * Manufacturer setting IE cat. II 2H3 + GB cat. II 2H3 + T ab. 1 A This appliance has been designed for non-professional, i.
2 B C GB IE.
3 INSTRUCTIONS FOR THE INST ALLER INST ALLA TION The Purchaser is responsible for the installation of the hob. The Manufacturer does not accept any responsibility for any damage or loss resulting from incorrect installation, and as such this will not covered by the Manufacturer ’s Guarantee.
4 INSTRUCTIONS FOR THE INST ALLER The following information is intended for qualified and competant persons only who will ensure that your appliance is installed correctly . All current legislation concerning the in - stallation of Gas appliances must be observed by the installer* * For the U.
5 ELECTRICAL CONNECTION W arning - this appliance must be earthed This appliance is designed for domestic use only . Connection to the mains supply must be made by a competant electrician, ensuring that all current regulations concerning such installations are observed.
6 LIVE L EAR TH NEUTRAL N MAINS SUPPL Y BROWN WIRE GREEN/YELLOW WIRE BLUE WIRE POWER CABLE These instructions are for Fitters qualified for installation of equipment in line with the relevant national standard. All work must be carried out with the electricity supply dis- connected.
7 ADAPTING THE HOB T O DIFFERENT TYPES OF GAS T o adapt the Hob for use with dif ferent types of gas, carry out the following instructions: — remove the grids and burners — insert the hexagonal spanner (supplied) into the burner support (Fig.
REGULA TING THE MINIMUM FLAME After lighting the burners, turn the control knob to the minimum setting and then remo- ve the knob (this can easily be removed by apply a gentle pressure). Using a small «T erminal» type screwdriver the regulating screw can be adjusted as in Fig.
Hob type Burner type Ø pan / pot (cm) A;B;C. R/H front burner 12÷ 18 A;B;C. L/H front burner 12÷ 18 A;B;C. R/H rear burner 18÷ 24 A;B. L/H rear burner 24÷ 26 C L/H rear burner 18÷ 24 C Central b.
10 GB IE MAINTENANCE AND CLEANING Before cleaning the Hob, ensure the appliance has cooled down. Remove the plug from the socket or (if connected directly) switch off the electricity supply . When cleaning the enamelled, varnished or chrome sections, use warm soapy water or a non caustic detergent.
An important point after buying a device Hoover HGH 640 B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hoover HGH 640 B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hoover HGH 640 B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hoover HGH 640 B you will learn all the available features of the product, as well as information on its operation. The information that you get Hoover HGH 640 B will certainly help you make a decision on the purchase.
If you already are a holder of Hoover HGH 640 B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hoover HGH 640 B.
However, one of the most important roles played by the user manual is to help in solving problems with Hoover HGH 640 B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hoover HGH 640 B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
