Instruction/ maintenance manual of the product HBR300 Hobart
Go to page of 24
F-34220 Rev. A (2/99) Over ZERO TARE Under Accept kg lb Net Wt. Gross Wt. CAPACITY 300lb x 0.1 lb / 150 kg x 0.05 kg NET GROSS lb kg ON OFF CLEAR ZERO FUNCTION LEGAL FOR TRADE III TARE HBR300 Bench Receiving Scale Instruction Manual Model ML-29116 701 S.
.
Bench Receiving Scale Ó Copyright Hobart Corporation 1999 Tabl e o f Cont ent s INTRODUCTION ......................................................................................................................... 1 FCC Note ........................
.
Bench Receiving Scale 1 H obart Bench Receiv ing S cale ( HB R 300) SAVE THESE INSTRUCTIONS I ntr o duct i on The HBR300 Bench Receiving Scale features a digital display with a 6-button keypad which tilts to create the best viewing angle. The scale also has adjustable legs and a level indicator to insure proper weight balance is maintained.
Bench Receiving Scale 2 I nst al la ti on and S e tup by a n A uthor i z ed H obar t Tec hni ci an Before using your scale for the first time, an Authorized Hobart Service Technician must install and set up your scale. This includes: ¥ Mounting the display and display pole to the platform.
Bench Receiving Scale 3 Us ing th e Sc ale When you are ready to use you scale do the following: ¥ Supply power to your scale either by battery (4 D-cell) or a wall-mounted adapter plug. ¥ Level the scale to maintain proper scale balance. ¥ Adjust the Display Head for easy viewing.
Bench Receiving Scale 4 S uppl yi ng P ow er to th e Sc ale Power can be supplied to the scale through the AC adapter or optional batteries. The scale uses four (4) D-cell batteries not supplied by Hobart. To insert batteries: 1. Open the front cover of the display by pulling the tab (located on the back right side of the display) toward you.
Bench Receiving Scale 5 Levelin g th e Sc ale There are four (4) leveling legs underneath the scale platter. You may need to adjust these legs if the scale is not seated properly. Proper adjustment of these legs helps you to maintain the proper scale balance.
Bench Receiving Scale 6 Disp lay He a d The Display Head can be adjusted for easy viewing and includes the display, display indicators, and a 6-button keypad. Disp lay Weight displays in lb (pounds) or kg (kilograms) and indicator arrows illuminate on the display.
Bench Receiving Scale 7 Ke yp ad You can use the 6-button keypad to perform functions in two modes: ¥ Operator Mode ¥ Setup Mode Operator Mode In Operator Mode you can do the following using the key.
Bench Receiving Scale 8 Setup Mode Setup Mode is used to program the scale with specific settings before weighing the product. In Setup Mode you can set, clear, or change: ¥ Preset tare ¥ Upper and lower weight limits lb kg NET GROSS ON OFF CLEAR ZERO FUNCTION TARE KEYPAD Key Function ON OFF Turns the scale on or off.
Bench Receiving Scale 9 Opera t in g th e Sc ale Refer to the specific section for a further explanation of each step. To operate the scale: 1. PRESS ON OFF to turn the scale on. 2. Access Setup Mode to preset tare and set upper and lower limits if desired.
Bench Receiving Scale 10 ☛ Note When setting the tare value, only the flashing digit can be changed. 2. PRESS lb kg to increase flashing digit by one. --OR-- PRESS NET GROSS to decrease the flashing digit by one. 3. PRESS TARE to move left one digit.
Bench Receiving Scale 11 Clearing a Preset Tare To clear a preset tare: 1. Remove product and container from scale platter. The preset tare weight displays. 2. HOLD DOWN FUNCTION and PRESS TARE . The tare indicator and last digit flashes. 3. PRESS CLEAR ZERO .
Bench Receiving Scale 12 2. PRESS lb kg to increase flashing digit by one. --OR-- PRESS NET GROSS to decrease the flashing digit by one. 3. PRESS TARE to move left one digit. The digit to the left flashes and you can increase or decrease the digit value.
Bench Receiving Scale 13 4. PRESS TARE 1 time, then PRESS lb kg 1 time. TARE ZERO Over Under Accept Net Wt. Gross Wt. lb kg LEGAL FOR TRADE III 5. PRESS FUNCTION . TARE ZERO Over Under Accept Net Wt. Gross Wt. lb kg LEGAL FOR TRADE III 6. PRESS TARE 2 times, then PRESS lb kg 2 times.
Bench Receiving Scale 14 Op e ratin g in Op e ra t o r Mode Access Operator Mode to operate one-touch tare, weigh products, and weigh items in batches. Weighing a Product Using One-Touch Tare If you do not know the package weight (tare value), use one-touch tare.
Bench Receiving Scale 15 Weighing in Batches Weighing in batches allows you to add ingredients and return the weight back to zero repeatedly by pressing Tare to control the weight of each added ingredient type. To batch: 1. Place the container on the scale platter.
Bench Receiving Scale 16 San it izi n g Do Don’t DO use 5% Chlorine Bleach (5.25% Sodium Hypochlorite). Ratio Bleach Water Concentration 1 : 250 1 tsp. 1 gal. 200 ppm 1 : 500 1/2 tsp. 1 gal. 100 ppm 1 : 1000 1/4 tsp. 1 gal. 50 ppm 1 : 2000 1/8 tsp. 1 gal.
Bench Receiving Scale 17 Erro r M essag es Error Message Possible Cause Action Item on platter is too heavy. Remove the item and PRESS CLEAR ZERO . Something is stuck between the upper and lower platter covers, or the upper platter cover has been removed.
Bench Receiving Scale 18 Ac cesso r y ( M o b i l e Cart) An optional mobile cart with rear locking casters is available. Contact your local Hobart Representative for further details. 33.960 16.850 14.000 34.793 43.750 4X .500 WIDTH TREAD 1.250 WIDTH TREAD 1.
.
F-34220 Rev. A (2/99).
An important point after buying a device Hobart HBR300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart HBR300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart HBR300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart HBR300 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart HBR300 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart HBR300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart HBR300.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart HBR300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart HBR300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
