Instruction/ maintenance manual of the product DS-2CD4324F-IZHS Hikvision
Go to page of 31
1 Camera Network Dome Camer a Quick Ope rati on Guide UD.6L0201B1228A01.
Network Dome Camera · Quick Operation Guide 1 1 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to cont act the dealer .
Network Dome Camera · Quick Operation Guide 2 2 Regula tory Informa tion FCC Infor mation FCC compliance: This equipment has bee n test ed and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules.
Network Dome Camera · Quick Operation Guide 3 3 2012/19/EU (WEE E directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equi pment, or dispose of it at desi gnated collection points.
Network Dome Camera· Quick Operation Guide 4 4 Safety Ins truction These instructions are intended to ensure that user can use t he product correctly to av oid danger or propert y loss. The precaution measure is divided i nt o “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
Network Dome Camera· Quick Operation Guide 5 5 ● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. ● Please make sure that the plug is firmly connected to the power socket. When the product is mounted on wall or ceiling, t he device shall be firmly fixed.
Network Dome Camera· Quick Operation Guide 6 6 ● Do not place the camera in extremely hot, c old (the operating tempera ture shall be- 30 ℃ ~+6 0 ℃ ,or -40° C ~ 60° C if the camera model has an “H” in i ts suffix), dusty or damp locations, and do not expose it to high electromagnetic radiation.
Network Dome Camera· Quick Operation Guide 7 7 T able of Cont ents 1 Appearance Description ................................................................ . 8 1.1 Overview of Typ e I Do me Camera ................................... 8 1.2 Overview of Typ e II Dome Camera .
Network Dome Camera· Quick Operation Guide 8 8 Appear ance Description 1 Overview of Type I Dome Came ra 1.1 Overview (1) of Typ e I Dome Camera Figure 1-1 Overview (2) of Typ e II D ome Camera Figur.
Network Dome Camera· Quick Operation Guide 9 9 Description of Overview (1~2) Table 1-1 No. Description No. Description 1 Black Liner 6 Reset 2 Bubble 7 Pow er Cable 3 Mounting Base 8 10/100M Self -adaptive Ethernet Interface 4 SD Card Slot 9 Lens 5 Video Out Interface 10 Audio/ Alarm Cables Overview of Type II Dome Cam era 1.
Network Dome Camera· Quick Operation Guide 10 10 Description of Type II Dome Camera Table 1-2 No. Description No. Description 1 Bubble 6 10/100M Self-adaptive Ethernet Interface 2 SD Card Slot 7 Lens.
Network Dome Camera· Quick Operation Guide 11 11 Insta llation 2 Before you start: ● Make sur e the device in t he package is in good condition and all the assembly parts are include d. ● Make sur e all the related equipment is po wer-off during the installati on.
Network Dome Camera· Quick Operation Guide 12 12 ● Make sur e that there is no reflective surface too close to the camera lens. The IR light from the camera may re flect back i nt o the lens causing reflection. ● The foam ring around the lens must be seated flush against the inner surface of the bubble to isolate the le ns from the IR LEDS.
Network Dome Camera· Quick Operation Guide 13 13 Inst all the Mo unting Base Figure 2-2 3. Connect the co rresponding power cable, network cable, audio and alarm cables. 4. Install the dome drive to the mou nting base. Inst all the Do me Drive Figure 2-3 5.
Network Dome Camera· Quick Operation Guide 14 14 1). Loosen the lock screw besides the lens. 2). Hold the plastic plate and rotat e the camera to adjust the pa nning angle [ 0~350 ° ]. 3). Push the lens forward and backward to adjust the tilting angle [0~80 ° ] 4).
Network Dome Camera· Quick Operation Guide 15 15 4). Adjust the No.1 Focus Lever (F~N) to o btain a perfect image on the monitor . 5). Set the iris type as MANUAL if the environment has a good and st able illu mination, and set the iris ty pe as AUTO if the envir onment has a strong and c hangeable i llumination.
Network Dome Camera· Quick Operation Guide 16 16 Inst all the Blac k Liner and Bubble Figure 2-6 Complete the Installation Figure 2-7 Installation of Type II Dome Cam era 2.2 Steps: 1. Drill the screw holes an d the cable hole according to the supplied drill template.
Network Dome Camera· Quick Operation Guide 17 17 Drill T emplate Figure 2-8 2. Install the mounting base to the ceiling with the supplied screws. Inst all the Mo unting Base Figure 2-9 3. Connect the co rresponding power cable, network cable, audio and alarm cables.
Network Dome Camera· Quick Operation Guide 18 18 4. Install the dome drive to the mou nting base. Install the Dome Drive Figure 2- 10 The surveillance a ngle of the camera is well- adjusted by default.
Network Dome Camera· Quick Operation Guide 19 19 Install the Bubble Figure 2- 12.
Network Dome Camera· Quick Operation Guide 20 20 Se tting the Network Cam era ov er the 3 LAN Purpose: T o view and configure the camera via LAN (Loca l Area N etwork), you need to connect the network camera in the same sub net with your PC. Then, install the SADP or PC NVR software to search and change the IP of network camera.
Network Dome Camera· Quick Operation Guide 21 21 Use PCNVR software and to list the online devices. Please refer to the user manual of PCNVR client software for det ailed informati on. 2. Ch ange the IP address and s ubnet mask to the same subnet as of your PC.
Network Dome Camera· Quick Operation Guide 22 22 Search Online Devices Figure 3-2 Device can be searched and displayed in the list in 15 seconds after it goes online; it will be removed from the list in 45 seconds after it goes offline. Search online devices manual ly: Y o u can also click to refr esh the o nline device list manually .
Network Dome Camera· Quick Operation Guide 23 23 Y o u can click or on each column hea ding to order the information; you can click to show the device table and hide the network parameter panel on the right side, or click to show the network parameter panel.
Network Dome Camera· Quick Operation Guide 24 24 Modify Network Par ameters Figure 3-4 3. Enter the IP address of network camera in the address field of the web browser to view the live video. The default v alue o f the IP address is “192.0.0.6 4” .
Network Dome Camera· Quick Operation Guide 25 25 Accessing via W eb Br owser 4 Syst em Requirement: Operating Sy stem: Microsoft Windows XP SP1 and a bove ver sion / Vist a / W in7 / Server 2003 / Server 2008 32bits CPU: Intel Pen tium IV 3.
Network Dome Camera· Quick Operation Guide 26 26 Login Interface Figure 4- 1 5. Inst all the p lug-in before viewing the live video and managing the camera. Please follow the installation prompts to inst all the plug-in. Y o u may h ave to close the web brow ser to finish the installation of the plug-in.
Network Dome Camera· Quick Operation Guide 27 27 Download Plug- in Figure 4-2.
Network Dome Camera· Quick Operation Guide 28 28 Inst all Plug- in Figure 4-3 Inst all Plug- in Figure 4-4.
Network Dome Camera· Quick Operation Guide 29 29 6. Reopen the web browser after the installation of the plug- in and repeat the above st eps 2-4 to login. For det ailed i nstructions of further configuration, please refer to the user manual of network camera.
Network Dome Camera· Quick Operation Guide 0 0.
An important point after buying a device Hikvision DS-2CD4324F-IZHS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hikvision DS-2CD4324F-IZHS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hikvision DS-2CD4324F-IZHS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hikvision DS-2CD4324F-IZHS you will learn all the available features of the product, as well as information on its operation. The information that you get Hikvision DS-2CD4324F-IZHS will certainly help you make a decision on the purchase.
If you already are a holder of Hikvision DS-2CD4324F-IZHS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hikvision DS-2CD4324F-IZHS.
However, one of the most important roles played by the user manual is to help in solving problems with Hikvision DS-2CD4324F-IZHS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hikvision DS-2CD4324F-IZHS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
