Instruction/ maintenance manual of the product HMR-107 Henny Penny
Go to page of 8
Model HMR-103,104,105,106,107 T o remove the heated merchandiser from the carton, you should: 1. Carefully cut banding straps. 2. Open flaps of carton and remove packing. 3. Lift carton from unit. 4. Remove four bolts mounting the merchandiser to the skid.
Model HMR-103,104,105,106,107 NEMA NUMBERS: Model 208/240-1 ph 208-3 ph 240-3 ph 1 0 7 14-50P L21-30P Hardwire 1 0 6 14-50P L21-30P Hardwire 1 0 5 14-50P L21-30P Hardwire 1 0 4 L14-30P L21-20P Hardwire 1 0 3 L14-30P L21-20P Hardwire 2-3.
Model HMR-103,104,105,106,107 2-4. ELECTRICAL DA T A T ABLE COMBI- AMPS COMBI- AMPS MODEL N A TION V OLT S KW 1 PHASE 3 PHASE MODEL N A TION VO LTS KW 1 PHASE 3 PHASE HMR-107 7 S 120/208 5.0 24 18 HMR-107 3F/2S/2F* 120/208 6.0 29 19 6.7 32 22 7.8 37 23 120/240 5.
Model HMR-103,104,105,106,107 2-4. ELECTRICAL DA T A T ABLE (Continued) COMBI- AMPS COMBI- AMPS MODEL N A TION V OLT S KW 1 PHASE 3 PHASE MODEL N A TION VO LTS KW 1 PHASE 3 PHASE HMR-106 3S/2F* 120/208 5.2 25 17 HMR-105 3F/2S* 120/208 4.2 20 14 (Cont.
Model HMR-103,104,105,106,107 2-5. CABINET DIMENSIONS 803 2-5.
Model HMR-103,104,105,106,107 2-6. CENTER GLASS These are the instructions for installing the center glass on units INST ALLA TION that are combination, self-serve and standard merchandisers. 1. Notice the location of the bracket on unit, as indicated.
Model HMR-103,104,105,106,107 2-6. CENTER GLASS INST ALLA TION (Continued) 4. Place glass in divider track as shown. 5. Slide bracket onto glass and align to its original position around the 2 acorn nuts.
Model HMR-103,104,105,106,107 2-7. SIDE GLASS Install the side panel glass, on both sides of the unit, as follows: INST ALLA TION 1. Pull out plunger on retainer and turn clockwise to lock open. 2. Slide the glass into the channel on the side rail, making sure the glass seats into the groove on the upright.
An important point after buying a device Henny Penny HMR-107 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny HMR-107 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny HMR-107 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny HMR-107 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny HMR-107 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny HMR-107, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny HMR-107.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny HMR-107. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny HMR-107 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
