Instruction/ maintenance manual of the product Gas Burner Heatmaster
Go to page of 11
INST ALLA TION AND OPERA TING INSTRUCTIONS IMPORT ANT : READ INSTRUCTIONS CAREFULL Y BEFORE BEGINNING INST ALLA TION OF L OG SET . NO TE : D AMPER MUST BE OPEN ACCORDING T O CHART ON P AGE 3 OF THESE INSTRUCTIONS OR FULL Y OPEN WHEN LOG SET IS OPERA TING .
2 GENERAL INFORMA TION + A fireplace screen must be in place when logs are operating and, unless other provisions for combustion air are provided, the screen must have an opening(s) for the introduction of combustion air. + If glass doors are used with this log set, open doors fully when unit is operating.
Minimum Opening (Square Inches) Minimum P ermanent F ree Opening , Square Inches for Masonry Built Fireplaces Chimney Height (F eet) 6 8 10 15 20 30 18” L og Set 49.
HOW TO INST ALL Y OUR GAS L OG SET This log set must be installed by a qualified person and instructions must be followed exactly to ensure safe operation. Y our log set is packaged in three (3) boxes. The complete burner assembly is packaged in one box and the logs are packaged in separate boxes.
SAND AND GL OWING EMBER PLA CEMENT (NA TURAL GAS) 1. Open the bag of sand and pour over the pipe filling the pan of the back pan burner. 2. P our the sand over the pipe, filling the bottom pan, following the contour of the pan. 3. Open the bag of glowing ember material and disperse it on top of the sand on the back and bottom pan burner.
L OG PLACEMENT PHO T OS L OG P ARTS LIST FOR CHML -18 & 24 and RAD -18 & 24 KEY LETTER A B C D E P ART NO . Log # 381 Log # 363 Log # 382 Log # 364 Log # CF L OG 106 Log # CF L OG 107 Log # CF.
FOR Y OUR SAFETY READ BEFORE LIGHTING A. This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly. B. BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.
FOR Y OUR SAFETY READ BEFORE LIGHTING A. This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly. B. BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.
FOR Y OUR SAFETY READ BEFORE LIGHTING A. This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly. B. BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.
INST ALLA TION INSTRUCTIONS FOR INST ALLING A ROT ARY V AL VE UNIT REMO TE CONTROL 1. R efer to pages 4 and 5 of these instructions for installation of the burner unit and logs. 2. The remote control package has a hand held transmitter and a receiver with wires attached to it.
KEY NO . A B C D E F G H I J K L M N O P Q R S T U V P ART NO . 14-2018 14-2024 11-1350 01-1080 01-1095 07-1009 11-2135 14-3018 14-3024 01-1080 BPO-2 AM-2 08-910 14-3000 14-3001 14-2010 10-1160 07-100.
An important point after buying a device Heatmaster Gas Burner (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Heatmaster Gas Burner yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Heatmaster Gas Burner - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Heatmaster Gas Burner you will learn all the available features of the product, as well as information on its operation. The information that you get Heatmaster Gas Burner will certainly help you make a decision on the purchase.
If you already are a holder of Heatmaster Gas Burner, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Heatmaster Gas Burner.
However, one of the most important roles played by the user manual is to help in solving problems with Heatmaster Gas Burner. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Heatmaster Gas Burner along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
