Instruction/ maintenance manual of the product SL-750TRS-IPI-D Heat & Glo LifeStyle
Go to page of 45
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 1 Models: SL-750TRS-IPI-D SL-550TRS-IPI-D SL-350TRS-C Owner ’ s Manual Installation and Operation • Do not store or use gasoline or other flamma- ble vapors and liquids in the vicinity of this or any other appliance.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 2 These units MUST use one of the vent systems described in the Installing the Appliance section of the Installers Guide . NO OTHER vent systems or component s MA Y BE USED .
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 3 TABLE OF CONTENTS Safety and Warning Information ......................................................... 2 Service Parts Lists ......................................
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 4 (NG , LP) Exploded Parts Diagram Service Parts SL-350TRS-C Beginning Manufacturing Date: 4-01 Ending Manufacturing Date: ______ Part number list on following page.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 5 (NG , LP) Service Parts List IMPORT ANT : THIS IS DA TED INFORMA TION. The most current information is located on your dealers VIP site. When order- ing, supply serial and model numbers to ensure correct service parts.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 6 (NG , LP) Exploded Parts Diagram Service Parts Beginning Manufacturing Date: 4-01 Ending Manufacturing Date: ______ .
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 7 (NG , LP) Exploded Parts Diagram Service Parts SL-550TRS-IPI-D Beginning Manufacturing Date: 4-04 Ending Manufacturing Date: ______ 7 Log Set Assembly Part number list on following page.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 8 (NG , LP) Service Parts List IMPORT ANT : THIS IS DA TED INFORMA TION. The most current information is located on your dealers VIP site. When ordering, supply serial and model numbers to ensure correct service parts.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 9 (NG , LP) Exploded Parts Diagram Service Parts SL-750TRS-IPI-D Beginning Manufacturing Date: 4-04 Ending Manufacturing Date: ______ Part number list on following page.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 10 (NG , LP) Service Parts List IMPORT ANT : THIS IS DA TED INFORMA TION. The most current information is located on your dealers VIP site. When order- ing, supply serial and model numbers to ensure correct service parts.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 11 (NG , LP) Exploded Parts Diagram Service Parts Beginning Manufacturing Date: 4-04 Ending Manufacturing Date: ______.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 12 1 Approvals and Codes Heat & Glo Quality Systems registered by SGS ICS Appliance Certification The Heat & Glo appliance models discussed in this Installers Guide have been tested to certification standards and listed by the applicable laboratories.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 13 For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used .
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 14 2 Getting St arted Introducing the Heat & Glo Gas Appliances Heat & Glo direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 15 Figure 1. Diagram of the SL-750TRS-IPI-D HOOD GAS CONTROLS GAS LINE ACCESS VENT COLLARS TOP S T ANDOFFS ELECTRICAL ACCESS RA TING PLA TES & LABELS BO TT OM GR IL L E COVER CERA MIC FIBE R P A D 37-7 /8 962 [] 3-9/ 16 90 [] 6-7/8 175 [] 35-5/ 8 905 [] 41 1041.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 16 Figure 2. Diagram of the SL-550TRS-IPI-D 32-9/16 827 [] 3-1 /2 90 [ ] 6- 7/8 174 [] 36 914 [] 31- 1/8 791 [ ] 32-1/8 816 [ ] 5- 1/2 140 [ ] 2-1/ 8 54 [ ] 6 152 [] 35-7/16 900.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 17 Figure 3. Diagram of the SL-350TRS-C 6-7 / 8 17 4 [] 3-1 / 2 90 [] 30- 5/8 77 7 [] 21-1/4 54 0 [] 29 737 [] 15-1/4 .
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 18 3 Inst alling the Appliance Step 1. Locating the Appliance S pace and clearance requirements for locating a appliance within a room (see Figure 4).
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 19 Figure 5. Framing Dimensions Framing should be constructed of 2 X 4 lumber or heavier . The framing headers may rest on the appliance stand-offs. Step 2. Framing the Appliance Appliance framing can be built before or after the appliance is set in place.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 20 NOTE: PIPES OVERLAP 1-1/4 INCHES (34.93mm) A T EACH JOINT . Figure 6.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 21 NOTE: PIPES OVERLAP 1-3/8 INCHES (34.93mm) A T EACH JOINT . Figure 7 .
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 22 ! Figure 8. V ent System Component s and T ermination Kits Step 3. Inst alling the V ent System A. V ent System Approvals These models have vent starting collars on both the top and the back of the unit.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 23 90-DEGR EE EL BOW S Figure 9. Flex V ent The flex vent must be supported with the spacing between support intervals not exceeding 4 feet, with no more than ½ inch sag between supports.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 24 V H 1' MIN. (305mm) 2' MAX. (610mm) 2' MIN. (610mm) 4' MAX. (1.22m) 3' MIN. (914mm) 6' MAX. (1.86m) 4' MIN. (1.22m) 8' MAX. (2.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 25 V H H + H 1 1' MIN. (305 mm) 2' MAX. (610 mm) 4' MAX. (1.22m) 2' MIN. (610 mm) 4' MAX. (1.22 m) 8' MAX. (2.4m) 3' MIN. (914 mm) 6' MAX.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 26 Figure 15. V enting with T wo 90° Elbows Use SL D-Series component s only . VENTING WITH TWO (2) 90 o ELBOWS NA TURAL GAS H + H 1 MAX. = 16 FT (4.8m) V + H + H 1 MAX.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 27 Figure 16. Venting with T wo 90° Elbows Use SL D-Series components only . H V V 1 VENTING WITH TWO (2) 90 o ELBOWS NA TURAL GAS H MAX. = 16 FT (4.8m) V + V 1 + H MAX.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 28 Figure 17. V enting with Three 90° elbows 1' MIN. (305 mm) 2' MAX. (610mm) 4' MAX. (1.22m) 2' MIN. (610 mm) 4' MAX. (1.22m) 8' MAX. (2.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 29 Figure 18. V enting with three 90° elbows Use SL D-Series components only . VENTING WITH THREE (3) 90 o ELBOWS NA TURAL GAS VENTING WITH THREE (3) 90 o ELBOWS PROP ANE V + H + V 1 + H 1 MAX.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 30 Use SL D-Series components only . Figure 19. V enting with three 90° elbows V 1 H 1 H V VENTING WITH THREE (3) 90 o ELBOWS NA TURAL GAS H + H 1 MAX. = 16 FT (4.8m) V + V 1 + H + H 1 MAX.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 31 Figure 20. V enting with Four 90° elbows VENTING WITH FOUR (4) 90° ELBOWS NA TURAL AND PROP ANE GAS V (MIN.) H (MAX.) 2' (609mm) 5' (1.52m) V 1 (MIN.) H 1 (MAX.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 32 ! Figure 21. Insert screwdriver or similar object here to remove cap.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 33 For V ertical Runs - The vent system must be supported every eight (8) feet (2.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 34 For V ertical Runs - One ceiling firestop is REQUIRED at the hole in each ceiling through which the vent passes. T o install firestop s for vertical runs that pass through ceilings: • Position a plumb bob directly over the center of the verti- cal vent component.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 35 C. V ent T ermination SL-Series V enting Only: For Horizont al T erminations - T o attach and secure the terminatio.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 36 V = VENT TERMINAL X = AIR SUPPL Y INLET = AREA WHERE TERMINAL IS NOT PERMITTED Figure 30. V ent T ermination Minimum Clearances A = 1 2" ....................... clearances above grade, veran- da, porch, deck or balcony B = 1 2" .
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 37 For V ertical T erminations - T o locate the vent and install the vent sections: • Locate and mark the vent centerpoint on the underside of the roof, and drive a nail through the centerpoint.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 38 Step 4. Positioning, Leveling, and Securing the Appliance • Place the appliance into position. • Level the appliance from side to side and from front to back. • Shim the appliance with non-combustible material, such as sheet metal, as necessary .
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 39 • Insert insulation from the outside of the appliance and pack the insulation tightly to totally seal between the pipe and the outer casing.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 40 Step 8. W iring the Appliance NOTE: Electrical wiring must be installed by a licensed electrician. CAUTION: DISCONNECT REMOTE CONTROLS IF AB- SENT FOR EXTENDED TIME PERIODS.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 41 Figure 36. Intermittent Pilot Ignition (IPI) Wiring Diagram TRANSFORMER 3 V AC PLUG IN R E D BA T TER Y P ACK THE R.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 42 Step 9. Finishing Figure 38 shows the minimum vertical and corresponding maximum horizontal dimensions of appliance mantels or other combustible projections above the top front edge of the appliance.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 43 Inst alling the T rim Combustible materials may be brought up to the specified clearances on the side and top front edges of the appliance, but MUST NEVER overlap onto the front face.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 44 Step 1 1. Before Lighting the Appliance Before lighting the appliance, be sure to do the following: Remove all paperwork from underneath the appliance.
Heat & Glo • SL-350TRS-C, SL-550/750TRS-IPI-D • 2065-985 Rev . J • 5/06 45 4 Maint aining and Servicing Y our Appliance Appliance Maintenance Although the frequency of your appliance servici.
An important point after buying a device Heat & Glo LifeStyle SL-750TRS-IPI-D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Heat & Glo LifeStyle SL-750TRS-IPI-D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Heat & Glo LifeStyle SL-750TRS-IPI-D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Heat & Glo LifeStyle SL-750TRS-IPI-D you will learn all the available features of the product, as well as information on its operation. The information that you get Heat & Glo LifeStyle SL-750TRS-IPI-D will certainly help you make a decision on the purchase.
If you already are a holder of Heat & Glo LifeStyle SL-750TRS-IPI-D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Heat & Glo LifeStyle SL-750TRS-IPI-D.
However, one of the most important roles played by the user manual is to help in solving problems with Heat & Glo LifeStyle SL-750TRS-IPI-D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Heat & Glo LifeStyle SL-750TRS-IPI-D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
