Instruction/ maintenance manual of the product 3800-3820 Heartland Bakeware
Go to page of 32
1050 Fountain St. N., Cambridge, Ontario, Canada N3H 4R7 Bus. ( 519) 650-5775 or Fax (519) 650-3773 Toll Free Phone 1-800-361-1517 Toll Free Fax 1-800-327-5609 © 2005 HEARTLAND APPLIANCES INC. Note: Please read these instructions thoroughly before attempting to install this unit.
Gas Cooktop Models 3800/3820 Legacy and 3805/3825 Metro CONSUMER W ARRANTY FIRST YEAR HEARTLAND warrants the replacement or repair of all parts, including gas components of this Cooktop which prove to.
Metro / Legacy Cooktop Section 1: Installation & Assembly ............. 2 Preparing the Installation Site .......................... 2 Installation Clearances .................................... 2 Installation / Clearance Diagrams .............. 3-10 Exhaust Hood .
The use of a gas cooking appliance results in the production of heat and mois- ture in the room in which it is installed. Ensure that the kitchen is well ventilated. Keep natural ventilation holes open or install a mechanical device (mechanical extractor hood).
2 Safety Instructions Please check for any damage that may have occurred during shipping. In the unlikely event that you find any shipping damage, inform your dealer immediately! Legacy and Metro cooktops consist of the cooktop body and the backguard.
3 Installation Diagram- 30” Legacy Cooktop Model 3800 Clearances • Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J" in T able 2 on next page) • Depth of cutout must not exceed 25”. (see dimension G) Air intake slots on underside of control panel must not be obstructed or covered.
4 I J K O NN 1 2 M G H L An appropriate exhaust hood with a minimum of 450 CFM is required on all 30" Legacy cooktops to ensure adequate and proper ventilation. For superior ventilation we recommend using a 36” hood, however a 30” hood is adequate.
5 Clearances • Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J in T able 2 on next page) • 0” Clearance to the back of the cooktop may be obtained when installing the appliance against a non-combustible wall or with the installation of our Splashback Kit.
6 I J K O NN 1 2 M G H L An appropriate exhaust hood with a minimum of 900 CFM is required on all 36" Legacy cooktops to ensure adequate and proper ventilation. For superior ventilation we recommend using a 42” hood, however a 36” hood is adequate.
7 Clearances • Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J" in T able 2 on next page) • Depth of cutout must not exceed 25”. (see dimension G) Air intake slots on underside of control panel must not be obstructed or covered.
8 I J K O NN 1 2 M G H L An appropriate exhaust hood with a minimum of 450 CFM is required on all 30"Metro cooktops to ensure adequate and proper ventilation. For superior ventilation we recommend using a 36” hood, however a 30” hood is adequate.
9 Clearances • Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J" in T able 2 on next page) • 0” Clearance to the back of the cooktop may be obtained when installing the appliance against a non - combustible wall or with the installation of our Splashback Kit.
10 I J K O NN 1 2 M G H L An appropriate exhaust hood with a minimum of 900 CFM is required on all 36" Metro cooktops to ensure adequate and proper ventilation. For superior ventilation we recommend using a 42” hood, however a 36” hood is adequate.
11 Exhaust Hood An exhaust hood must be installed over your new appliance. (see fig. 2) Exhaust hoods to match the Legacy and Metro cooktops are available from your dealer . Our hoods are designed and built to complement your range’ s visual appeal and performance.
12 Preparing the Cooktop for Installation 1 . Carefully remove banding with metal shears. Caution: banding may be under pressure, wear gloves to protect hands from accidental cuts. 2. Remove cardboard lid. 3. On 30” models there are 2 individual boxed grates.
13 Cooktop Features A . Burners feature 15,500 BTU (4.4kW) easy clean, sealed style, dual head burners. The outer head is designed for high temperature, heavy duty jobs. The inner head is more suited for low temper- ature requirements, such as sauces and melting chocolate.
14 Control Panel Graphic 4 burner - top illustration 6 burner - middle illustration 4 burner & grill - bottom illustration (fig 6) These illustrations show the control panel layout of each model. The Legacy is shown, however , the Metro has a similar layout.
15 Lighting the T op Burners and Grill Cooktop is equipped with a spark ignition system that is electrically operated. Pushing in and turning the knob to any position will light the burner . When the knob is turned, a distinct clicking noise will be heard.
16 Grilling Guide (For 36” units with grill feature) Generally we recommend preheating the grill 10 minutes on high. This provides a more even heating of the grill. Then follow the guide below . When grilling roasts and thick meats sear on high then reduce heat to allow food to cook through- out and not burn.
17 Porcelain – Legacy Series Keeping it clean The porcelain is very serviceable and simple to clean, but because it is glass, it will not withstand rough handling or abuse. Never place a cold wet cloth on a hot porcelain surface. Porcelain is glass and sudden changes in temperature may cause cracking.
18 Surface Burners T op burners require little care other than to wipe off the head of each burner . If a boil over occurs, the burner part can be easily lifted out so burner port holes can be cleaned in hot soapy water with a soft brush. There are no bolts or screws to remove.
19 Grill The easiest way to clean the grill is immedi- ately after cooking. First, turn the control valves to the OFF position. ( “O” ) Do not handle the porcelain. W earing an oven mitt, to protect hands from the heat and steam, dip a barbecue brush in tap water .
20 T rouble Shooting Burner Set Up and Adjustment The cooktop was carefully set up and inspected at the factory but some final adjustments may be necessary once the unit is installed. Important : ensure burner rings are assembled properly 1. First, check to ensure there are no gas leaks.
21 If you still require help... Contact your dealer and/or service techni- cian. Should you still require help, see the “Reference” section on how to contact Heartland Appliances. If you still require help... Contact your dealer and/or service techni- cian.
22 Pr obl em Cause Rem edy N o spar ks w h en an y con t rol kn ob i s tu rn ed to “li gh t” N o pow er t o spa r k m o du l e - mo d ule s wi tc h faulty C h eck elect rical su pply t o spark m o.
23 Reference Accessories W ok Ring #3389 Stainless steel 9” diameter ring manufactured to fit standard size woks. The wok ring is designed to fit into the grate fingers of Metro and Legacy series ranges. (fig 1 1) Legacy/Metro Griddle Kit #3809 Support is stainless steel for long lasting and easy clean up.
24 Parts Drawing & Description (fig 12) 3660 3662 3664 3663 3661 3680 3665 3483 3364 3350 3457 3483 3483 3484 3486 3350 Double cast grate 3364 G rill 3457 Small pot ring 3483 Chrome Control knob 3.
25 Safety Guidelines Exhaust Hood Safety Caution: Do not store items of interest to children in cabinet above the cooktop or on top of cooktop cabinet. Children climbing on cooktop to reach items could be seriously injured. 1. Clean exhaust hood frequently – grease should not be allowed to accumulate on hood or filter .
26 Selecting the Proper Cookware Utensils will affect the overall safety and performance of cooktop cooking. It is impor- tant to select them carefully . An improperly selected utensil will not cook efficiently or evenly . For best results, follow these guide- lines: 1 .
27 • Set the burner control so that the flame heats only the bottom of the pan and does not extend beyond the bottom of the pan. Excessive flame is hazardous. The high BTU burners can easily melt cookware handles. • Hold the handle of the pan, using a dry potholder , to prevent movement of the utensil when stirring or turning food.
28 • Grease is flammable. Let hot grease cool before attempting to handle it. A void letting grease deposits collect in the container under the cooktop burners or the grill. Clean these areas after each use or boilover . • For proper lighting and performance of the burners keep the burner ports clean.
29 See our complete line of kitchen appliances: Model 3110: shown with the Optional cowl (available only with the Classic Series) Model 1903 3010 - 30" Classic II Series Refrigerator, 18 cubic feet capacity, bottom mount freezer drawer, and convienient top mount fresh food compartment.
An important point after buying a device Heartland Bakeware 3800-3820 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Heartland Bakeware 3800-3820 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Heartland Bakeware 3800-3820 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Heartland Bakeware 3800-3820 you will learn all the available features of the product, as well as information on its operation. The information that you get Heartland Bakeware 3800-3820 will certainly help you make a decision on the purchase.
If you already are a holder of Heartland Bakeware 3800-3820, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Heartland Bakeware 3800-3820.
However, one of the most important roles played by the user manual is to help in solving problems with Heartland Bakeware 3800-3820. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Heartland Bakeware 3800-3820 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
