Instruction/ maintenance manual of the product ONESTOP 92508 Harbor Freight Tools
Go to page of 8
Gar den Lantern 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .harborfreight.com 92508 INST ALLA TION AND OPERA TING INSTR UCTIONS Cop yr ight © 2005 by Harbor F reight T ools ® .
SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 2 PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures, parts list and assem- bly dia gram.
SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 3 ELECTRICAL SAFETY 4. This light must be installed into an outlet box properly installed and grounded in accordance with all codes and ordinances. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 4 15. Maintain light with care. Keep lantern clean. Properly maintained lights will work better and more efficiently . Do not use a damaged lanter n. T ag damaged lanter ns and their corresponding switches “Do not use” until repaired.
SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 5 ASSEMBL Y INSTR UCTIONS NO TE: F or additional information regarding the par ts listed in the f ollowing pages , ref er to the Assembly Diagram on the last page .
SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 6 8 . While being careful not to scrape either the wall or the lantern, hang the Base (1) of the lantern on the plastic hookon the Mounting Bracket (10) by the hole in the side of the Base - see Figure 1 on the previous page.
SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 7 OPERA TION INSTR UCTIONS Figure 3 View from underneath the Base (1). MAINTENANCE INSTRUCTIONS SENSITIVITY Setting This controls the amount of motion needed to trip the sensor and the distance that the sensor detects motion at.
SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 8 NOTE: Some par ts are listed and shown f or illustration pur poses only , and are not av ailable individu- ally as replacement parts.
An important point after buying a device Harbor Freight Tools ONESTOP 92508 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools ONESTOP 92508 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools ONESTOP 92508 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools ONESTOP 92508 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools ONESTOP 92508 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools ONESTOP 92508, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools ONESTOP 92508.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools ONESTOP 92508. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools ONESTOP 92508 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
