Instruction/ maintenance manual of the product 93213 Harbor Freight Tools
Go to page of 10
ELECTRIC CHAINSA W SHARPENER Model 93213 ASSEMBL Y and OPERA TING INSTR UCTIONS NO TE: Actual pr oduct design may diff er slightly fr om that shown in this manual. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at http://www .harborfreight.
Page 2 SKU 93213 For technical questions, please call 1-800-444-3353. Specifications Save This Manua l Y ou will need the man ual for the saf ety wa r nings and precautions, assembly instr uctions , operating and maintenance procedures , par ts list and diagram.
Page 3 SKU 93213 For technical questions, please call 1-800-444-3353. 9. Maintain tools with care . K eep tools shar p and clean for better and saf er performance. F ollow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, ha ve them repaired b y an author ized technician.
Page 4 SKU 93213 For technical questions, please call 1-800-444-3353. Grinding Wheel W arnings . 1. Do not use a grinding wheel if it is chipped, crack ed, or wor n. Y ou can check if the wheel has cr acks not visible to the human eye by hanging it up by the central hole and tapping it with a nonmetallic object (ie: screwdriver handle).
Page 5 SKU 93213 For technical questions, please call 1-800-444-3353. Mounting a Grinding Wheel . Ref er to the Assembly Dra wing on page 10 and FIGURE 3 and FIGURE 4 below . 1. Raise the T op Housing (4B) and loc k it in the up position by tightening the Lock Stop (6) .
Page 6 SKU 93213 For technical questions, please call 1-800-444-3353. Operation W arning! Alwa ys unplug the unit while adjusting chain to be shar pened. Refer to the Assembly Drawing on page 10 and the various photographs. Note: Raise the T op Housing (4B) while adjusting the chain.
Page 7 SKU 93213 For technical questions, please call 1-800-444-3353. Operation (continued) 8. Lock the chain in the Sliding Guides (31) by turning the Handle (34). See FIGURE 8. Th e Handle (34) should be situated so that you can easily release and tighten it.
Page 8 SKU 93213 For technical questions, please call 1-800-444-3353. Operation (continued) Maintenance 1. K eep the Shar pener clean and free of dust, metal debr is and dirt. 2. Chec k the Gr inding Wheel bef ore each use to make sure it isn’t damaged.
Page 9 SKU 93213 For technical questions, please call 1-800-444-3353. NO TE : Some par ts are listed and show n f or illustration purposes only and are not availab le indi- vidually as replacement par t s .
Page 10 SKU 93213 For technical questions, please call 1-800-444-3353. Assembly Drawing Chain Mounting Assembly Set 39.
An important point after buying a device Harbor Freight Tools 93213 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 93213 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 93213 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 93213 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 93213 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 93213, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 93213.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 93213. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 93213 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
