Instruction/ maintenance manual of the product 93213 Chicago Electric
Go to page of 16
ELECTRIC CHAINSA W SHARPENER Model 93213 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2005 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1-800-444-3353. SKU 93213 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 For technical questions, please call 1-800-444-3353. SKU 93213 attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended.
Page 4 For technical questions, please call 1-800-444-3353. SKU 93213 processes) can result in eye, skin and breathing irritation. Always use a NIOSH (National Institute for Occupational Safety and Health) approved respirator and safety goggles. Avoid skin exposure.
Page 5 For technical questions, please call 1-800-444-3353. SKU 93213 GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
Page 6 For technical questions, please call 1-800-444-3353. SKU 93213 Extension Cords Grounded 1. tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet 2.
Page 7 For technical questions, please call 1-800-444-3353. SKU 93213 SPECIFICA TIONS Motor 120 V~, 0.75 A (Load), Direct Drive RPM 4200 Vise Capacity 0.80” to 0.50” T able / Vise Angles 35° Right to Left Arbor Diameter 7/8” Wheel Dimensions 4-1/4” Dia.
Page 8 For technical questions, please call 1-800-444-3353. SKU 93213 ASSEMBL Y W ARNING! Unplug the tool before changing grinding wheels, or before making any adjustments to the tool. Installation Install the Sharpener to a workbench 1. before use. FIGURE 1 1/4” Hole with Bolt Lock Wheel (18) 1.
Page 9 For technical questions, please call 1-800-444-3353. SKU 93213 Mounting a Grinding Wheel Refer to the Assembly Drawing on page 10. FIGURE 3 Lock Stop (6) T op Housing (4B) Grinding Wheel Cover (1 1B) 1. Raise the T op Housing (4B) and lock it in the up position by tightening the Lock Stop (6).
Page 10 For technical questions, please call 1-800-444-3353. SKU 93213 OPERA TION W ARNING! Unplug the unit before adjusting chain to be sharpened. Refer to the Assembly Drawing on page 10 and the various photographs. Note: Raise the T op Housing (4B) while adjusting the chain.
Page 1 1 For technical questions, please call 1-800-444-3353. SKU 93213 FIGURE 7 Lock Stop (6) 6. Hold it at that position while you tighten the Lock Stop (6) so that the wheel will only go down to that point. See FIGURE 7 . Depending on the amount of material 7.
Page 12 For technical questions, please call 1-800-444-3353. SKU 93213 FIGURE 10 3. Slowly lower the grinding wheel as shown in FIGURE 10 . If you notice slight errors in your settings, turn off the unit and unplug it before you make your adjustments.
Page 13 For technical questions, please call 1-800-444-3353. SKU 93213 MAINTENANCE Keep the Sharpener clean and free of 1. dust, metal debris and dirt. Check the Grinding Wheel before each 2. use to make sure it isn’t damaged. Do not use a grinding wheel if it is chipped, cracked, or worn.
Page 14 For technical questions, please call 1-800-444-3353. SKU 93213 P ARTS LIST Part Description Q’ty 1 Screw 3 2 Motor Cover 1 3 Power Cord 1 4B T op Housing 1 5B Rocker Switch 1 6 Lock Stop 1 7.
Page 15 For technical questions, please call 1-800-444-3353. SKU 93213 ASSEMBL Y DRA WING Chain Mounting Assembly Set 39.
Page 16 For technical questions, please call 1-800-444-3353. SKU 93213 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabili.
An important point after buying a device Chicago Electric 93213 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 93213 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 93213 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 93213 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 93213 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 93213, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 93213.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 93213. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 93213 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
