Instruction/ maintenance manual of the product 39213 Harbor Freight Tools
Go to page of 6
Hanging t ool cabinet Model 39213 inst alla tion instructions Visit our website at: http://www .harborfreight.com read this material before using this product. Failure to do so can result in serious injury . sa Ve tHis Manual. Copyright © 2001 by Harbor Freight T ools ® .
Page 2 SKU 39213 For technical questions, please call 1-800-444-3353. sa Ve tHis Manual Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 SKU 39213 For technical questions, please call 1-800-444-3353. asseMbl y Y our Hanging T ool Cabinet, will require complete assembly as described in the following steps. T o assist you with assembly and operation, please refer to the Operational Figures as well as the Parts List and Assembly Diagram located on the last pages of this manual.
Page 4 SKU 39213 For technical questions, please call 1-800-444-3353. note: Each Door is labeled indicating Right Door , Left Door , and Center Door . Loosely set the T op Panel (#1) in place on top of the assembly you nished in steps 6. one (1) through ve (5) above.
Page 5 SKU 39213 For technical questions, please call 1-800-444-3353. note : Make sure that the rear lip of each Shelf can slip into the tabs located on the sides of the Back Panel (8). rear lip of shelf Figure 5 10. Each Shelf (#10) sits in the tabs on the Back Panel (8) and the tabs on the Side Panels (7, 16) - see Figure 5.
Page 6 SKU 39213 For technical questions, please call 1-800-444-3353. unp acKing When unpacking your Hanging T ool Cabinet, check to make sure the following parts are included. If any parts are missing or broken, please call Harbor FreigHt tools at 1-800-444-3353.
An important point after buying a device Harbor Freight Tools 39213 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 39213 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 39213 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 39213 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 39213 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 39213, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 39213.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 39213. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 39213 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
