Instruction/ maintenance manual of the product 46389 Harbor Freight Tools
Go to page of 10
MASTER BALL JOINT ADAPTER / 14 PC (FOR USE WITH 3-IN-1 SERVICE KIT - MODEL 38335) Model 46389 OPERA TING INFORMA TION 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at http://www .harborfreight.com Copyright 2001 by Harbor Freight T ools.
SPECIFICA TIONS T ABLE SA VE THIS MANUAL Y ou will need this manual for the safety warnings and precautions, operating, inspection, maintenance, and cleaning procedures. Keep your invoice with this manual. Write the invoice number on the inside of the front cover .
2. KEEP CHILDREN A W A Y FROM WORK AREA. Do not allow children to handle this product. 3. STORE IDLE EQUIPMENT . When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment and keep out of reach of children.
14. USE THE RIGHT PRODUCT FOR THE RIGHT JOB . There are certain applications for which this product was designed. Do not use small equipment, tools or attachments to do the work of larger industrial equipment, tools or attachments. Do not use this product for a purpose for which it was not intended.
STEEL BALL (NOT PROVIDED) O-RING (NOT PROVIDED) FORCING SCREW (NOT PROVIDED) PLUG BOL T (#14) C-FRAME (NOT PROVIDED) FIGURE A 2. T o operate the Master Ball Joint Adapter Set, it will be necessary to attach the Plug Bolt (part #14) contained in this Set to the C-Frame of the 3-In-1 Service Kit.
RECEIVER TUBE (#1, #2, #3, #4, #5, #6, #10, #1 1) REMOVER/INST ALLER (#13) PLUG BOL T (#14) FORCING SCREW C-FRAME FIGURE B 4. Mount the proper size Receiver T ube (parts #1, #2, #3, #4, #5, #6, #10, #1 1) over the threaded side of the ball joint. (See Figure B, and Assy .
SKU 46389 P AGE 7 .
SKU 46389 P AGE 8 .
BALL JOINT ADAPTER APPLICA TIONS CHART INSPECTION, MAINTENANCE, AND CLEANING 1. Before each use, inspect the general condition of the Master Ball Joint Adapter set. Check for cracks , breaks, or bends in the tool, and any other condition that may af fect its safe operation.
! .
An important point after buying a device Harbor Freight Tools 46389 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 46389 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 46389 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 46389 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 46389 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 46389, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 46389.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 46389. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 46389 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
