Instruction/ maintenance manual of the product 706.59669 Craftsman
Go to page of 18
706.596680 706.596690 6-Drawer Chest 7-Drawer Roll-A-Way Owners Manual Craftsman 7-Drawer AXS TM Roll-Away Craftsman 6-Drawer AXS TM Chest Section 1612 1613 1614 1615 1616 1617 1618 1623 1624 1625 Des.
i CRAFTSMAN°i CHEST TOP AND FACIA PARTS REPLACEMENT S Facia Chest Top with light Information Center CHEST TOP INSTALLATION AND REMOVAL (With task light) Tools Required: 3/8" Wrench Chest Top Removal • Disconnect power from unit. • Remove enough drawers to reach the top back inside of the unit.
INFORMATION CENTER INSTALLATION AND REMOVAL Tools Required: Screwdriver, Crosstip Tape Removal • Disconnect power from the unit. • Remove enough drawers to reach the retaining screw under the information center. (See removing and installing drawers.
CONNECTING POWER • Ensure that the unit and power cord are clean and dry. • insert the round end of the power cord connector into the jack in the back of the unit. • Plug the cord into an appropriate electrical outlet. Fuse block Jack Cord REMOVING AND INSTALLING DRAWERS: • Empty the drawer.
I CRAFTSMAN°I DRAWER AND WORK SURFACE PARTS REPLACEMENT SLIDE REPLACEMENT Tools Required: Drill 5/32" Drill bit Rivet gun Removal • Remove drawer or work surface from unit. (See drawer and work surface installation and removal.) • Carefully drill out rivet holding slide drawer member to drawer or work surface.
DRAWER AND WORK SURFACE REPLACEMENT DRAWER FRONT INSTALLATION AND REMOVAL Tools Required: Drill 5/32" Drill bit Rivet gun Crosstip screwdriver Removal • Remove drawer or work surface from unit. (See Drawer and Work surface installation and removal.
DRAWER AND WORK SURFACE INSTALLATION AND REMOVAL Note: For pull out work surface without task light, follow drawer removal instructions. DRAWER • Empty the drawer. • Fully extend the drawer. Release Lever Style - Lift or lower (depending on the slide) the release lever on both sides, (this allows the slides to ride over the stops.
I CRAFTSMAN°I BOTTOM REPLACEMENT Tools Required: Socket Wrench 5/16" Socket Removal • Disconnect power from the unit. • Remove contents from drawers. • Carefully lay the chest on its back. Take care to prevent scratches or damage to the unit.
I CRAFTSMAN°I TOP, WIRING HARNESS, HARNESS GROMMET Parts Replacement Roll-away top WIRING HARNESS REPLACEMENT HARNESS GROMMET REPLACEMENT Tools Required: 3/8" Wrench WIRING HARNESS AND HARNESS GROMMET REMOVAL • Disconnect power from unit. • Remove pull out work surface and enough drawers to reach the top back inside of the unit.
TOP INSTALLATION AND REMOVAL Tools Required: Screwdriver, Crosstip Roll-away top removal • Disconnect power from unit. • Remove pull out work surface. (See drawer and work surface installation and removal.) • Remove enough drawers to reach the top back inside of the unit.
I CRAFTSMAN°I CHEST TOP WITHOUT TASK LIGHT Tools Required: Screwdriver, Crosstip Chest top removal • Disconnect power from unit. • Remove pull out work surface. (See drawer installation and removal.) • Remove enough drawers to reach the top back inside of the unit.
I CRAFTSMAN°I TASK LIGHT REPLACEMENT Tools Required: Screwdriver, Crosstip Removal • Disconnect power from the unit. • Fully extend task light assembly. • Make note of light orientation. • Remove (6) mounting screws to remove light. • Unplug light.
I CRAFTSMAN°I LOCKING SYSTEM Parts Replacement Actuator Channel Actuator Rod Bracket ACTUATOR ROD AND ACTUATOR CHANNEL REPLACEMENT ACTUATOR ROD AND ACTUATOR CHANNEL REMOVAL • Disconnect power from the unit. • Remove work surface (Roll-away only).
ACTUATOR ROD BRACKET INSTALLATION AND REMOVAL Removal • Disconnect power from unit. • For roll-aways, remove work surface. (See drawer and work surface installation and removal. • Remove enough drawers to reach the top back inside of the unit. (See Drawer and Work surface installation and removal.
CHEST TOP INSTALLATION AND REMOVAL (With task light) Tools Required: 3/8" Wrench Chest Top Removal • Disconnect power from unit. • Remove enough drawers to reach the top back inside of the unit. (See Drawer installation and removal.) • Push actuator rod to back of unit to disconnect from back of lock.
I CRAFTSMAN°I LOCK REPLACEMENT Removal • Disconnect power from unit. • For roll-aways, remove work surface. (See drawer and work surface installation and removal • Remove enough drawers to reach the lock retaining clip behind the lock. • Remove lock retaining clip.
I CRRFT.TMRN°J STRIKER REPLACEMENT Tools Required: Screwdriver Removal • Remove drawer from unit. • Turn drawer upside down. • Depress (2) detents. Push striker in to remove. Depress detents Drawer installation and removal • Emptythe drawer. • Fully extend the drawer.
I CRAFTSMAN°I DRAWER FRONT REPLACEMENT Tools Required: Crosstip screwdriver Removal • Remove retaining screw(s). • Slide drawer front assembly as indicated to unhook mounting tabs. • Pull out to remove. Installation • Position drawer front on drawer assembly.
An important point after buying a device Craftsman 706.59669 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 706.59669 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 706.59669 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 706.59669 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 706.59669 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 706.59669, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 706.59669.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 706.59669. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 706.59669 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
