Instruction/ maintenance manual of the product KT-400 American Dynamics
Go to page of 44
DN1726-081 1 KT -400 Ethernet Four-Door Controller Installation Manual.
.
DN1726-081 1 iii KT-400 Ethernet Four-Door Co ntroller Installation Manual Table of Contents Pre-Installation Information ................ ............. .... ............ ............. ............. ................ .................... ............. .
DN1726-081 1 iv Configuring the KT-400 Ethernet Fo ur-Door C ontroller with the KT-Finde r ..... ............. ................ ............ 33 Installation Checklist ....... ............. ............. ................ ............. ............. ...
DN1726-081 1 1 KT-400 Ethernet Four-Door Co ntroller Installation Manual Pre-Inst allation Information T o the Installer: If you are familiar with the installation, you can use the inst allatio n checklist on p age 37 with the symbol . Copyright Info rmation Copyright © 2008 T yco International Ltd.
DN1726-081 1 2 T echnical Support For technical assistance with the KT -400 Ethernet Four-Door Controll er and other Kantech products, co ntact technical support, Monday to Friday .
DN1726-081 1 3 KT-400 Ethernet Four-Door Co ntroller Installation Manual Compliance Specifications FCC & IC Compliance This device complies with Part 15 of the FCC rules Class A.
DN1726-081 1 4 • 1 GB RAM • Minimum free hard disk space: 20 GB • Color depth: 24-bit (16 million colors ), required for V ideo Integration only • Screen resolution: 1024 x 768 • Graphic ada.
DN1726-081 1 5 KT-400 Ethernet Four-Door Co ntroller Installation Manual Overview The KT -400 Ethernet Four-Door Controller is designed to meet the highest standards o f access control and point monitoring applications. Here ar e the features of the KT -400 Ethernet Four-Door Co ntroller.
DN1726-081 1 6 Input s There are 16 onboard input s on the KT -400 Ethernet Four-Door Controller. Up to 240 mo re can be added through the addition of exp ansion modules, such as the KT -MOD-INP16, for a total of 256 inputs. Each input can be i ndividually configured for one of th e following application: • Door contact (4 onboard) • T .
DN1726-081 1 7 KT-400 Ethernet Four-Door Co ntroller Installation Manual Downloadable Firmware The firmware program can be downlo aded from any EntraPass workstatio n to th e KT -400 Ethernet Four-Door Controller. The firmware program, stored in the co ntrol ler ’s flash memory , is upgraded without having to change any part s.
DN1726-081 1 8 Figure 1: KT -400 Ethernet Four-Door Controller PCB V iew.
DN1726-081 1 9 KT-400 Ethernet Four-Door Co ntroller Installation Manual Figure 2: KT -400 Ethernet Four-Door Controller Input s and Outputs V iew 10/100 BASE-T ETHERNET POR T COMPUTER NETWORK KT -300.
DN1726-081 1 10 Figure 3 : KT -400 Cabinet Model for North America.
DN1726-081 1 11 KT-400 Ethernet Four-Door Co ntroller Installation Manual System Architecture The KT -400 Ethernet Four-Door Controller can be used through va rious site app lications with EntraPass S pecial Edition, EntraPass Corporate Edition and EntraPass Global Editio n.
DN1726-081 1 12 Figure 5 : USB-485 w ith EntraPas s Special Edition a nd Corporate Edition w ith Corpor ate Gatew ay Figure 6 : VC-485 with EntraPass Global Edition and Global or Corporat e Gateway.
DN1726-081 1 13 KT-400 Ethernet Four-Door Co ntroller Installation Manual Figure 7 : Over the internet with a KT -NCC and EntraPass Global Edition Figure 8 : Over RS-232 straight from the EntraP ass R.
DN1726-081 1 14 VIT AL LED Heartbeat Patterns Communication st atus and other vital controller p arameters can be obtained fro m VIT AL LED heartbeat patterns. It is located near the RS-232 port (COM3 ), see Figure 1 . This information is p articular ly useful when connecting the controller to the rest o f th e EntraPass system.
DN1726-081 1 15 KT-400 Ethernet Four-Door Co ntroller Installation Manual T echnical Specifications T ype Description Power input ( KT -400 ) T ransformer class 2, IN 120 V AC; OUT 16 V AC, 75 V A Bat.
DN1726-081 1 16 Electrical S pecifications KT -400 Ethernet Four-Door Controlle r Models, Exp ansion Modules Models, Related Document ation and Miscellaneous Items OPEN COLLECTOR OUTPUTS MAXIMUM CURRE.
DN1726-081 1 17 KT-400 Ethernet Four-Door Co ntroller Installation Manual DN1475 EntraPass S p ecial Edition, Reference Manual - Sp anish version DN1436 EntraPass Corporate Edition, Reference Manual -.
DN1726-081 1 18 Models Information • KT -400 : Cabin et with one KT -400 for North America, up to thr ee expansion modules can be in stalled in the cab inet, • KT -400-PCB : KT -400 with parts, .
DN1726-081 1 19 KT-400 Ethernet Four-Door Co ntroller Installation Manual Inst alling the KT -400 Ethe rnet Four-Door Controller Preparing to Inst all the KT -400 Ethe rnet Four-Door Controlle r Requi.
DN1726-081 1 20 W arning: Controlled door locks may be go verned by regulatory bodies and should always be installed according to local regulations. In most instances, ther e ar e strict limitations t.
DN1726-081 1 21 KT-400 Ethernet Four-Door Co ntroller Installation Manual Relay Controlled Output s The KT -400 provides four relay outputs RELA Y1 to RELA Y4 (3 Amps, 30 V AC/VDC). The KT -400 can be exp anded up to 256 controlled outputs when usi ng expansion module s.
DN1726-081 1 22 Connecting the KT -400 Ethe rnet Four-Door Controller Connecting the VC-485 or the USB-485 to th e RS-485 Bus Connect the RS-485 cable to (COM1) + 485 - and the RS-485 signal grou nd to the 12 VDC AUX - (negative) Controllers are linked together throug h th eir RS-485 terminals.
DN1726-081 1 23 KT-400 Ethernet Four-Door Co ntroller Installation Manual Connecting the Master Controlle r to the Host PC via RS-232 Connect RS-232 cable from KT -400 to the PC (maximum length 30 m (100 ft )) If the local master controller is located more than 30 m (100 f t) from the host computer , you must use a VC-485 or USB-485 interface.
DN1726-081 1 24 SPI Exp ansion Port The SPI (Serial Peripheral Interface) expa nsion port on the KT -400 is used to co nnect expansion modules, in order to add more input s and outputs such as relays. The maximum cu rrent draw for the SPI exp ansion port is 500 mA when the 12V AUX terminals are not used.
DN1726-081 1 25 KT-400 Ethernet Four-Door Co ntroller Installation Manual Import ant Inst allation Rule s about Exp ansion Modules Note 1: The maximum current draw must be calculate each time there is a new module ad ded to the SPI chain.
DN1726-081 1 26 Figure 10 : PCB View of Exp ansion Modules.
DN1726-081 1 27 KT-400 Ethernet Four-Door Co ntroller Installation Manual Figure 1 1 : Example of KT -400 Ethernet Four-Door Controller Interconnection with Exp ansion Modules MOTION DETECTOR BUZZER P.
DN1726-081 1 28 Figure 12 : Exp ansion Modules Cabinet for North America.
DN1726-081 1 29 KT-400 Ethernet Four-Door Co ntroller Installation Manual T r oubleshooting T able 3: Reset T ypes and Descriptions Jumpers Heartb eat s Patte rns Reset s Continuous quick flashing Sof.
DN1726-081 1 30 Default initialization The KT -400 default initialization or Factory Default DHCP is done at Kantech. The fo llowing steps should only be followed if: a) Y ou want to configure the KT -400 with the KT -Fi nde r , see page 33.
DN1726-081 1 31 KT-400 Ethernet Four-Door Co ntroller Installation Manual KT -400 Ethernet Four-Door Cont roller Maintenance Recommendations The KT -400 includes a lithium i on rechargable battery (see the KT -400 Ethernet Four-Door Controller PCB View on page 8).
DN1726-081 1 32 Configuring the KT -400 Ethernet Four-Door Controller with the W eb Configuration Page This procedure is practical if y ou want to configure the KT -400 in advance before going on site. Optional Documentation Application Note, N etworking Basics , DN17 96.
DN1726-081 1 33 KT-400 Ethernet Four-Door Co ntroller Installation Manual Configuring the KT -400 Ethernet Four -Door Controller with the KT -Finder The KT -Finder is an application used to configure the KT -400 over the local area net work (LAN) or the wide area network (W AN).
DN1726-081 1 34 Configuring the KT -400 Ethernet Four -Door Controller with the KT -Finder (continued) 7. Put jumpers on JP2 an d JP3 . 8. V erify your Network Configuratio n In formation Shee t : • Enter the EntraPass IP address or the Domain name of the EntraPass Gateway .
DN1726-081 1 35 KT-400 Ethernet Four-Door Co ntroller Installation Manual KT -400 Ethernet Four-Door Controller Network Configuratio n Information Sheet Please complete one sheet pe r KT -400 Ethernet.
DN1726-081 1 36 Configuration in a Wi de Area Network (W AN) EntraPass Site For more details, refer to the EntraPass Reference Ma nual. EntraPass Special Edition / Corporate Gateway IP Address: ______.______.______.______ Router Public IP Addre ss:______.
DN1726-081 1 37 KT-400 Ethernet Four-Door Co ntroller Installation Manual Inst allation Checklist T o the Inst aller: If you are familiar with the inst allation, you can use the checklist with the symbol.
DN1726-081 1 38 Input s and Output s Assignment s Sheet Doors DOOR 1 CONT ACT REX DOOR 2 CONT ACT REX DOOR 3 CONT ACT REX DOOR 4 CONT ACT REX Inputs DOOR Z1 NO or NC EOL, DRY or DEOL REX Z2 NO or NC E.
DN1726-081 1 39 KT-400 Ethernet Four-Door Co ntroller Installation Manual Figure 14: KT -400 Cabinet Inner Door S ticker Diagram ( North America) Figure 15.
DN1726-081 1 40.
An important point after buying a device American Dynamics KT-400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Dynamics KT-400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Dynamics KT-400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Dynamics KT-400 you will learn all the available features of the product, as well as information on its operation. The information that you get American Dynamics KT-400 will certainly help you make a decision on the purchase.
If you already are a holder of American Dynamics KT-400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Dynamics KT-400.
However, one of the most important roles played by the user manual is to help in solving problems with American Dynamics KT-400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Dynamics KT-400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
