Instruction/ maintenance manual of the product TP-DMX24F American DJ
Go to page of 8
CONTROLS AND FUNCTIONS 1. CHASE 1-12 and LED indicator 2. CHANNEL 1-24 and LED indicator 3. CH 1-24 HOLD/FLASH selector HOLD indicator/FLASH indicator 4.
TP-DMX24F™ Instructions page 2 7. AUDIO PERCENT TRAITS CHASE a.Shift of (00-255 or 0% -100%) b: Select AUDIO or CHASE mode when running program 8. MANUEL / STEP a. Used to increase the steps or program when programming b. Press AUDIO PERCENT TRAITS CHASE and P AGE 1 / P AGE 2 +MANUEL / STEP to insert one step when programming c.
+16V-+24V 500mA Min. DC INPUT LINE INPUT RANGE 100MV-1VP-P + - 1:GND 2:DATA - 3:DATA + DMX OUTPUT 1 3 2 5 6 4 1:GND 2:DA T A- 3:DA T A+ 2 3 1 TP-DMX24F™ Instructions page 3 OPERA TING INSTRUCTIONS There are 6 modes of operation plus BLACKOUT 1. MANUAL 2.
TP-DMX24F™ Instructions page 4 OPERA TING INSTRUCTIONS Cont.. 1. MAKE SURE THE TRANSFORMER IS CORRECT 16 TO 24 DC AND CORRECT POLARITY . 2.Plug in transformer and turn on unit. LED’s for HOLD / FLASH, TRAITS CHASE, P AGE 1 and DIMMER are on. you are now in MANUAL MODE 1.
2.1 CHASE PROGRAM Cont. At this point you can set the duration between this and the next step in the chase if you want to do this. Use (FIG13.) CHASE F ADER or touch (FIG 5.) REAL TIME /T AP SYNC , wait until the interval is what you want, then touch (FIG 5.
TP-DMX24F™ Instructions page 6 2.3 DIMMER SETTING IN MANUAL MODE T o adjust DIMMING/V ALUE of any channel in Manual mode. A. Enter CHASE PROGRAM mode, T ouch any (FIG 2.) CHANNEL 1-24 when LED is on touch same channel again until LED starts to blink.
OPERA TING INSTRUCTIONS Cont. TP-DMX24F™ Instructions page 7 3. RECORD / CHASE cont. There are 3 ways to control the chase program 1. CHASE, 2. AUDIO, 3. MANUAL 3.1. CHASE control A. Set (FIG13.) CHASE F ADER to SHOW position > 10 min. The Chase will be controlled by what ever time was programmed in section 2.
TP-DMX24F™ Instructions page 8 OPERA TING INSTRUCTIONS Cont. MIDI SETTING AND RUNNING MIDI SETTING T ouch and hold (FIG.1.) CHASE 9, CHASE 10, CHASE 1 1,CHASE 12 , while power is being turned on. CHASE 1, CHASE 2, CHASE 3 LEDs blink rapidly and (FIG14.
An important point after buying a device American DJ TP-DMX24F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American DJ TP-DMX24F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American DJ TP-DMX24F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American DJ TP-DMX24F you will learn all the available features of the product, as well as information on its operation. The information that you get American DJ TP-DMX24F will certainly help you make a decision on the purchase.
If you already are a holder of American DJ TP-DMX24F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American DJ TP-DMX24F.
However, one of the most important roles played by the user manual is to help in solving problems with American DJ TP-DMX24F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American DJ TP-DMX24F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
