Instruction/ maintenance manual of the product Sonic Beam II American DJ
Go to page of 8
User Instructions American DJ 4295 Charter Street Los Angeles Ca. 90058 www .americandj.com Introduction: Congratulations and thank y ou f or purchasing the Sonic Beam I I T M from American DJ . The new Sonic Beam II T M i s p a r t o f American DJs continuing pursuit for creating high quality aff ord- able intelligent fixtures .
Sonic Beam II™ Introduction FEA TURES: Sonic Beam II™ features include: • Single Gobo/Color wheel, with smooth color crossfading stepper motor . • 14 colored Gobos plus spot, with bi colored gobos and multicolored gobos. • High Speed Shutter with variable Speed and Bi-color strobe • 180 degree pan 360 degree barrel rotation.
Unpacking: Every Sonic Beam II™ has been thoroughly tested and has been shipped in per fect operating order . Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your xture for any damage.
Operatinge Modes: You can use the Sonic Beam II TM in three ways: • Stand alone mode - The unit will react to sound, chasing through the several built in programs. You can also use the optional Sonic Beam II/C Remote Control to set blackout, strobe or slow scan mode.
2. The Sonic Beam II TM uses four DMX channels to operate; Channel 1 is mirror pan, channel 2 is mirror tilt, channel 3 is gobo/color , and channel 4 is shutter . 3. T o run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller .
Listed below are a few common problems the user may encounter , with solutions. No light fr om the unit; 1. Check if the ‘Power On’ (red) LED is lit and the fan is running. If not, there is no main supply. 2. Check the fuse in the back panel. 3. Check if lamp is lit.
The Sonic Beam II may be controlled by a wide range of controllers; ie. Show Designer™, DMX Operator , ™ Scene Setter™ or by the Sonic Beam II/C basic controller . Sonic Beam II/C features: • Stand by (Black out) • Strobe • Slow Scan • 30 ft.
©American DJ Supply American DJ W orld Headquar ters: 4295 Char ter Street Los Angeles, CA 90058 USA T el: 323-582-2650 / F ax: 323-582-2610 W eb: www .
An important point after buying a device American DJ Sonic Beam II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American DJ Sonic Beam II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American DJ Sonic Beam II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American DJ Sonic Beam II you will learn all the available features of the product, as well as information on its operation. The information that you get American DJ Sonic Beam II will certainly help you make a decision on the purchase.
If you already are a holder of American DJ Sonic Beam II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American DJ Sonic Beam II.
However, one of the most important roles played by the user manual is to help in solving problems with American DJ Sonic Beam II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American DJ Sonic Beam II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
