Instruction/ maintenance manual of the product G0528 Grizzly
Go to page of 32
COPYRIGHT © SEPTEMBER, 2003 BY GRIZZLY INDUSTRIAL, INC. W ARNING: NO PORTION OF THIS MANUAL MA Y BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROV AL OF GRIZZL Y INDUSTRIAL, INC.
W ARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
T able o f Co ntent s SECTION 1: SAFETY ....................................................................................................................... 2 Safety Instructions For Power Tools .....................................................
-2- G0528 Sliding Router Table 5. KEEP CHILDREN AND VISIT ORS A W A Y . All children and visitors should be kept at a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys. 7. NEVER FORCE TOOL .
G0528 Sliding Router Table -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
-4- G0528 Sliding Router Table Unfamiliarity with this manual could result in serious personal injury . Read and become familiar with the contents of this manual, including all the safety warnings.
G0528 Sliding Router Table -5- We are proud to offer the Model G0528 Router Table. This machine is part of a growing Grizzly family of fine woodworking machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s com - mitment to customer satisfaction.
-6- G0528 Sliding Router Table The Model G0528 power switch ( page 16, Figure 13 ) is designed to accept 2-prong DOUBLE INSULATED plugs or 3-prong grounding type plugs. The power switch provides the conve - nience of switching power to the router at the front of the router table instead of having to reach under the table and locate the switch.
G0528 Sliding Router Table -7- Set up and operation instructions will be easier to understand if you become familiar with the location and names of the machine features shown in Figure 2 .
-8- G0528 Sliding Router Table A. Left Fence ..................................................... 1 B. Right Fence ................................................... 1 C. Dust Hood ..................................................... 1 D. Power Cord .
G0528 Sliding Router Table -9- 5mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm 75mm Washer Lock Washer Hex Nut Wing Nut Phillips Head Sheet Metal Screw Setscre w Phillips Head Scr.
-10- G0528 Sliding Router Table Metal components are often coated with a wax or oil to prevent rusting during shipment. Clean all coated parts with a solvent cleaner or cit - rus-based degreaser such as Grizzly’s G7895 Degreaser. To clean thoroughly, some parts may need to be removed.
G0528 Sliding Router Table -11- This section covers the basic assembly and adjustment instructions needed to begin opera - tion. Complete the assembly in the order pro - vided in this manual and then read the remaining portion of the manual before attempting any type of operation.
-12- G0528 Sliding Router Table C ross Suppor ts Components Needed: Qty Table Assembly .................................................. 1 Table Cross Supports ......................................... 3 Rubber Stops .................................
G0528 Sliding Router Table -13- Components Needed: Qty Stand Legs ......................................................... 4 Diagonal Supports .............................................. 2 Tray .....................................................
-14- G0528 Sliding Router Table Components Needed: Qty Left Fence ......................................................... 1 Right Fence ........................................................ 1 Dust Hood ............................................
G0528 Sliding Router Table -15- Components Needed: Qty Miter Fence ........................................................ 1 Miter Plate .......................................................... 1 T o attach the sliding table: 1. Secure the miter plate to the sliding table by sliding the T-bolts into the table T-track.
-16- G0528 Sliding Router Table 5. Tighten the router clamps to secure the router base into position. Figure 14. Adjust the router clamp thickness bolts. Thickness Bolt Jam Nut Components Needed: Qty Switch ............................................
G0528 Sliding Router Table -17- DO NOT use the router table without adequate dust collection. Hook the dust port up to a shop vacuum or dust collection system.
-18- G0528 Sliding Router Table Y our safety is important! Please follow the warnings below during this entire section: T o avoid serious personal injury , read and become familiar with the entire instruction manual before using the Model G0528.
G0528 Sliding Router Table -19- 4. Raise the bit to a height slightly higher than that of the board thickness. 5. Adjust the infeed fence to the right of the outfeed fence, so that the distance is equal to the desired depth of cut ( Figure 17 ). Figure 17.
-20- G0528 Sliding Router Table 3. Raise the router bit to the desired height. 4. Adjust the fence back and away from the bit only enough to allow the ball bearing to con - trol the depth of cut as shown in Figures 20 & 21 . 5. Adjust the fence as close as possible to the bearing.
G0528 Sliding Router Table -21- If you need parts or help in assembling your machine, or if you need operational information, call the Grizzly Service Department. Trained ser - vice technicians will be glad to help you. If you have any comments regarding this manual, please write to Grizzly at the address below: Grizzly Industrial, Inc.
-22- G0528 Sliding Router Table Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 G0 528 Machi ne Data She e t MACHINE DA T A SHEET Design Type ..............................................................
G0528 Sliding Router Table -23- 304 313 303 311 307 308 312 315 142 323 146 302 318-1 318 143 320 319 301 145 305 230 314 317 337 147 308 316 307 230 308 307 333 142 139 142 306 127 119 120 125 328 22.
-24- G0528 Sliding Router Table 111 P0528111 FENCE HALF 112 P0528112 T-BOLT 1/4-20 X 3/4" 113 P0528113 MICRO-ADJUSTMENT ROD 114 P0528114 FENCE BODY (LEFT) 115 P0528115 FENCE BODY GUARD 116 P05281.
G0528 Sliding Router Table -25- 219 P0528219 GUARD 220 P0528220 29MM INSERT PLATE 221 P0528221 MOTOR CLAMP PIECE 222 P0528222 HEX CLAMP SHAFT 223 P0528223 T-BOLT 1/4-20 X 2" 224 PB26 HEX BOLT 1/4-20 X 1-1/2" 226 PS38M PHLP HD SCR M4-0.7 X 10 227 PS38M PHLP HD SCR M4-.
-26- G0528 Sliding Router Table Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
CUT ALONG DOTTED LINE ___Other__________________________________________________ 9. How many of your woodworking machines are Grizzly? _____________ 10.
FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZL Y INDUSTRIAL, INC. P .O. BOX 2069 BELLINGHAM, W A 98227-2069 Place Stamp Here TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name__________________________.
.
-OR- • SECURE ORDERING • ORDERS SHIPPED WITHIN 24 HOURS • E-MAIL RESPONSE WITHIN ONE HOUR Visit Our Website T oday And Discover Why Grizzly ® Is The Industr y Leader! Call Today For A FREE Full.
An important point after buying a device Grizzly G0528 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G0528 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G0528 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G0528 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G0528 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G0528, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G0528.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G0528. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G0528 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
