Instruction/ maintenance manual of the product Light Station American DJ
Go to page of 8
American DJ ® LIGHT STATION User Instructions American DJ Supply 4295 Char ter Street Los Angeles Ca 90058 (323) 582-2650 (323) 582-2610 www .americandj.com Intr oduction: Thank you f or purchasing the Light Station™ DMX controller from American DJ ® .
XLR MALE SOCKET 1 EARTH HOT 2 3 COLD XLR FEMALE SOCKET 1 EARTH HOT 2 3 COLD XLR Pin Configuration: Pin 1 = Shield Pin 2 = Data Compliment (negative) Pin 3 = Data True (positive) Set Up: Power Supply: Before plugging your unit in be sure the source volt- age in your area matches the required v oltage f or y our American DJ® Light Station.
as long y ou hold do wn the b utton. Releasing the button will s witch the xtures off . 2. When used in conjunction with the ADD/KILL (17) f eature , these buttons are used to activ ate stored channel assignments. Y ou ma y group a n umber of channels to be activ ated at once, then store this group in one of 16 FLASH BUTT ONS (1 & 13).
20. Step Up/Cross Setup Button: This has two functions: 1. In manual chase or prog ram modes , this button is used to select the ne xt step , (scene) in the pattern. The current step will be displa y ed b y the right two digits in the LCD displa y (6).
accomidate the use of some older European xtures. 33. DMX XLR Output: A maximum of 96 DMX channel output. This is the DMX signal output. This is a 3 pin XLR connector . If connecting to a 5 pin XLR input connector you m ust use a 3-5 pin adaptor . 34.
Cross Mode: Cross mode is a man ual adjustment that fades from one step to the ne xt. Y ou ma y use this function in any CHASE P A TTERN. This function will not eff ect channels 9-16.
3. T urn on any channels you wish to assign to a FLASH BANK. 4. After you hav e tur ned on your desired channels , press on of the FLASH BUTT ONS (1 &13) while holding down the ASSIGN BUTT ON (25). ALL the channel LED will ash indicating that your program was placed into that FLASH BUTT ON’ s memor y .
also change chase patter ns nor mally . T o activ ate this function press and release the MANU AL STEP (26) while holding do wn the SHIFT B UTT ON (16). The LCD DISPLA Y (6) MANUAL STEP LED will light, indicating this function has been activ ated. T o exit this function press the CHASE BUTT ON (24) at any time.
An important point after buying a device American DJ Light Station (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American DJ Light Station yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American DJ Light Station - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American DJ Light Station you will learn all the available features of the product, as well as information on its operation. The information that you get American DJ Light Station will certainly help you make a decision on the purchase.
If you already are a holder of American DJ Light Station, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American DJ Light Station.
However, one of the most important roles played by the user manual is to help in solving problems with American DJ Light Station. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American DJ Light Station along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
