Instruction/ maintenance manual of the product LC-1000 Graco
Go to page of 8
The T rabon microprocessor based LC-1000 Controller is a multi-use solid state controller that is dedicated to the operation and monitoring of intermittent operat- ing series and parallel centralized lubrication systems equipped with a cycle or pressure switch for cycle completion feed back.
Page 2 14540 LC-1000 Lube System Controller INPUT VOL T AGE HOT NEU PUMP PUMP 12 3 4 5 6 7 8 9 MANUAL RUN 10 1 1 12 13 14 15 16 17 18 19 CYCLE SWITCH (SEE NOTE 2) + - + - F AUL T F AUL T DO NOT USE OPTIONAL LOW-LEVEL SWITCH AND/OR HIGH PRESSURE SWITCH.
Page 3 14540 LC-1000 Lube System Controller 76.2 (3.00) DIMENSIONS mm / (Inches) 1 14.3 (4.50) 127.0 (5.00) 1 14.3 (4.50) 4.8 (.19) POWER LUBE F AUL T CYCLE LUBE SYSTEM CONTROLLER TIME COUNTS REMAINING MANUAL RUN PRGM ENTER MODEL LC-1000 MANUAL RUN BUTTON 127.
Page 4 14540 LC-1000 Lube System Controller OPERA TION When power is applied, the green “POWER LED”lights and the LC-1000 counts down alternately from the programmed “OFF/ON” T imes/Counts to zero. In the “ON” (Monitor) mode, the ” PUMP LED” lights.
Page 5 14540 LC-1000 Lube System Controller Sample LC-1000 Program for Series Progressive, 31 Point Series Progressive System 4. “CYCLE” (Cycle Switch T ransitions) a) Press “ENTER” Key; CYCLE.
Page 6 14540 LC-1000 Lube System Controller Sample LC-1000 Program for Piston Distributor or Injector Systems 31 Point Piston Distributor System DESCRIPTION System Lube V olume: 99 cc (6.0 cu in) per hour EO-3 Motor Driven Pump: 140 cc/min (8.5 cu in) T otal Piston Distributor Displacement: 4.
Page 7 14540 LC-1000 Lube System Controller Sample LC-1000 Program for Bi-Flo (Dual Line) Systems 31 Point Bi-Flo (Dual Line) System DESCRIPTION System Lube V olume: 6.0 cu in (99 cc) per hour Bi-Flo Motor Driven Pump Used: 8.6 cu in (141 cc) per minute.
Y our Program Record Company: _____________________________________ By: _______________________ Machine Identi fi cation: __________________ Date: _____________________ System T ype: Bi-Flo ___ Pisto.
An important point after buying a device Graco LC-1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco LC-1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco LC-1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco LC-1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco LC-1000 will certainly help you make a decision on the purchase.
If you already are a holder of Graco LC-1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco LC-1000.
However, one of the most important roles played by the user manual is to help in solving problems with Graco LC-1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco LC-1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
