Instruction/ maintenance manual of the product C1110-32 Amer Networks
Go to page of 17
Gigabit Ethernet Adapter User’s Guide Version 1.0 PN# 1907GA1200T6380 This User's Guide contains important inform ation regarding the installation of your adapter card.
Amer.com 7259 Bryan Dairy Road, Lar go, FL 33777 © Amer.com Corp., 1997-2002 All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Amer.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
． Reorient or relocate the receiving antenna. ． Increase the separation between the equipment and receiver. ． Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to. ． Consult the dealer or an exp erienced radio/TV technician for help.
1 I NTRODUCTION Thank you for choosing the 10/100/1000Mbps Gigabit Ethernet Card for 32-bit PCI Bus-equipped perso nal computers. The 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card is ideal for spee.
2 Supports IEEE802.1Q VLAN tagging Supports 10/100/1000Mbps Auto-negotiation operation Full Duplex support for 10/100/1000M b/s data rates Auto MDI-II/MD I-X crossover f or all three speeds Built-in FIFO (8K/64K) buffers reduces overhead of memory transfers 802.
3 provides a straightforward up grade without wasting a company’s existing invest ment in hardware, software, an d trained pe rsonnel. The increased speed and extra bandwidth offered by Gigabit Ethe.
4 Fast Ethernet Tech nology The growing importance of LANs and the increasin g complexity of desktop computing applications ar e fueling the need for high perform ance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and im prove client/server response times.
5 U NPACKING AND I NSTALLATION This chapter provides unpacking and installation information for the 32-bit PCI 10/100/ 1000Mbps Gigabit Ethernet Card. Unpacking CAUTION: Under ordinary circumstances, .
6 z One 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card. z One Driver Diskette z This User’s Guide. If any item is found missing or damaged, please contact your local reseller for replacement . Installing the Gigabit Ethernet Card 1. Shut down the computer, unplugs its power cord, and remove the chassis cover.
7 5. Switch computer power on. If the BIOS section of your computer’s boot progr am is Plug-and-Play compliant, then at power-up the BIOS will automatically configure any newly installed the Gigabit Ethernet Card.
8 Software Installation Before you connect the 32-bit PCI 10/100/100 0Mbps Gigabit Ethernet Card to the network, you have to install the network driver fi rst.
9 LED I NDICATORS Two LED indicators: Link, Activity. Link Indicator This indicator lights green when the Gigabit Card is connects to 10/100/1000Mbps Gigabit Ethernet Network. Activity Indicator (ACT) This indicator blinking gr een will be transmitting or received data on the network.
10 T ECHNICAL S PECIFICATIONS General Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethe rnet IEEE 802.
11 Amer.com Warranty Policy Limited Lifetime Warrant y In the event of a defect in quality or workmanship, Amer.com will repair or replace any hardware product sold by Amer.
12 improperly installed or faulty software, or service by anyone other than an Amer.com Service Technician. If there is evidence that the failure was due to user negligence, Amer.com has the right to void this warranty and or charge normal service rates for the subject repair.
13 Limits and Expectati ons There are no express warranties except as listed above. Network products by Amer.com shall not be liable for incidental or consequential damages resulting from the use of this product. Any future upgrades, including (but not limited to) hardware and software are not covered by this limited warranty.
An important point after buying a device Amer Networks C1110-32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Amer Networks C1110-32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Amer Networks C1110-32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Amer Networks C1110-32 you will learn all the available features of the product, as well as information on its operation. The information that you get Amer Networks C1110-32 will certainly help you make a decision on the purchase.
If you already are a holder of Amer Networks C1110-32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Amer Networks C1110-32.
However, one of the most important roles played by the user manual is to help in solving problems with Amer Networks C1110-32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Amer Networks C1110-32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
