Instruction/ maintenance manual of the product 307878Y Graco
Go to page of 18
307878Y EN Instructions 50:1 Ratio Fire-Ball ® Lubrication Pump Portable units for heavy grease. For prof essional use only. See page 2 for model inform ation, including maximum working pressure and app rovals. Important Safety Instructions Read all warnings and instructions in this manual.
Table of Contents 2 307878Y Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Grounding . . . . . . . . . . . . . . . . . . . .
Warnings 307878Y 3 Warnings The following warnings are fo r the setup, use, grounding, mainte nance, and repair of th is equipment. The exclama- tion point symbol alerts you to a genera l warning and the ha zard symbols refer to procedure- specific risks.
Warnings 4 307878Y SKIN INJECTION HAZARD High-pressure fluid from dispensing device, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediat e surgical treatment.
Installation 307878Y 5 Installation Grounding Ground all of this equipment: • Pump: Use a ground wire and clamp as shown in F IG . 1. Remove the grou nd screw (Z) and insert through the eye of the ring terminal at end of ground wire (Y). Fasten the screw back onto the pump an d tighten securely.
Installation 6 307878Y Models 225006, 225026, 240880, 240881, and 245696 Refer to F IG . 3 for the following instructions. 1. Models 225006 and 240 880 : Assembly the base (3) as show n in the Par ts Drawing on page 14. Models 225026, 24088 1, and 245696 : Assemble the truck (3) as shown in the Parts Drawing on pa ge 13.
Installation 307878Y 7 Models 222069, 240885, and 245694 Refer to F IG . 4 for the following instructions. 1. Remove the cover from the pail and scoop the lubri- cant from the ce nter to the sides of the pail to ma ke its surface concave. 2. Center the follow plate (5 ) in the pail openin g.
Installation 8 307878Y Models 226012 and 240886 Refer to F IG . 7 for the following inst ructions unless other wise indicated. 1. Assemble the truck as sh own in the Pa rts Drawing on page 13 but do not assemble the hand le. 2. Slide handle through elevator slide tube and secure handle to base.
Installation 307878Y 9 Typical Installation The installation shown below is only a guide for s electing and installing system components and accessories. Con- tact your Graco distributor for assistance in designing a system to suit your particular needs.
Installation 10 307878Y Air Line and Accessories NOTE: Install air line accessories in the order sh own in the Typical Ins tallation. • Install a pump runaway valve ( G) to shut off the air to the pump if the pump accelerates beyo nd the pre-adjusted setting.
Installation 307878Y 11 6. Set the air pressure to each pump at the lowest pressure needed to get the desir ed results. NOTE: A pump runaway valve can be installe d not he air line to automatically shut of f the pump if it starts to run too slow. Never allow the pump to run dry of the fluid being pumped.
Parts 12 307878Y Parts Ref No 2, Dispense Kit 222070 Model 225827, 240884: 35 lb to 50 lb pail size Model 222069, 245694, 240885: 25 lb to 50 lb pail size Ref.
Parts 307878Y 13 Model 225026, 245696l, 240881: 120 lb drum size Model 225773, 245695, 2480883: 35 lb to 50 lb pail size Ref No. 3, Truck 203650 . Ref.
Parts 14 307878Y Model 225006, 240880: 120 lb drum size Ref No. 3, Portable Base 203622, Series B Ref No. 2, Dispense Kit 245697 Ref. Part No. Description Qty.
Parts 307878Y 15 Ref No. 2, Dispense Kit 222838 Model 222245, 240882: 120 lb drum size Ref Part No. Description Qty 2a 109154 HOSE 1 2b 242056 VALVE 1 2c 114558 COUPLER, quick-disconne ct 1 2d 169971 NIPPLE, quick-disconne ct 1 2e 202577 Z-SWIVEL 1 Ref Part No.
Parts 16 307878Y Model 226012, 240886: 50 lb pail size Ref No. 7, CE Installation Kit 240831 Ref. Part No. Description Qty. 1 23 9877 PUMP, 50:1 Fire-Ball, See manual 308883 for parts 1 2 22 2070 DISP.
Technical Data 307878Y 17 Technical Data . 50:1 Ratio Fire-Ball Lub rication Pumps US Metric Maximum fluid working pressure 5000 psi 35 MPa, 350 bar Maximum Air Inlet Pressure 100 psi 0.7 MPa, 7 bar Sound (dBa) Tested at 100 psi (0.7 MPa, 7 bar) at 40 cycles per minute Sound Pressure Level, measur ed at 1 meter from unit 77.
All written and visual data con tained in th is document reflects the latest product info rmation available at the time of publica tion. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/pate nts.
An important point after buying a device Graco 307878Y (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco 307878Y yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco 307878Y - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco 307878Y you will learn all the available features of the product, as well as information on its operation. The information that you get Graco 307878Y will certainly help you make a decision on the purchase.
If you already are a holder of Graco 307878Y, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco 307878Y.
However, one of the most important roles played by the user manual is to help in solving problems with Graco 307878Y. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco 307878Y along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
