Instruction/ maintenance manual of the product 1466 Graco
Go to page of 8
23 4 © 1999 Graco 152-12-99 IS2480 Failure to follow these warnings and the assembly instructions could result in serious injury or death. Avoid serious injury from falling or sliding out. Always use seat belt. STRANGULA TION HAZARD: DO NOT place swing in any location where there are cords, such as window blind cords, drapes, phone cords, etc.
23 4 © 1999 Graco 152-12-99 IS2480 Failure to follow these warnings and the assembly instructions could result in serious injury or death. Avoid serious injury from falling or sliding out. Always use seat belt. STRANGULA TION HAZARD: DO NOT place swing in any location where there are cords, such as window blind cords, drapes, phone cords, etc.
5 152-12-99 IS2480 67 8 At t aching the Legs Step 1. The four legs have a double button at one end and a single button beneath it. With the hub sides facing up, place the motor housing and pivot housing on the floor . Position legs so their single buttons also face up.
5 152-12-99 IS2480 67 8 At t aching the Legs Step 1. The four legs have a double button at one end and a single button beneath it. With the hub sides facing up, place the motor housing and pivot housing on the floor . Position legs so their single buttons also face up.
9 152-12-99 IS2481 10 12 11 T o provide head support for a smaller child, your swing model may include one of the following accessories: T wo head supports: Insert them into the pockets in the back of the cloth seat pad. Head support cushion: Use it in the seat as shown, threading the seat belt straps through the corresponding holes in the cushion.
9 152-12-99 IS2481 10 12 11 T o provide head support for a smaller child, your swing model may include one of the following accessories: T wo head supports: Insert them into the pockets in the back of the cloth seat pad. Head support cushion: Use it in the seat as shown, threading the seat belt straps through the corresponding holes in the cushion.
13 152-12-99 IS2481 14 15 16 T o T urn Off the Swing Press and hold either speed button. Indicator light will go off and swing will stop. Using the T imer Y ou can program your swing to turn of f af ter a cert ain period of time. The timer button, located between the two speed buttons, sets the swing time in ten-minute increments up to 40 minutes.
13 152-12-99 IS2481 14 15 16 T o T urn Off the Swing Press and hold either speed button. Indicator light will go off and swing will stop. Using the T imer Y ou can program your swing to turn of f af ter a cert ain period of time. The timer button, located between the two speed buttons, sets the swing time in ten-minute increments up to 40 minutes.
An important point after buying a device Graco 1466 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco 1466 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco 1466 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco 1466 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco 1466 will certainly help you make a decision on the purchase.
If you already are a holder of Graco 1466, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco 1466.
However, one of the most important roles played by the user manual is to help in solving problems with Graco 1466. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco 1466 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
