Instruction/ maintenance manual of the product GA-5EASV-RH Gigabyte
Go to page of 88
USER’S MANUAL GA-5EASV -RH Pentium ® 4/D Processor Motherboard Pentium ® 4/D Processor Motherboard Rev. 1001 12ME-5EASVRH-1001R * The WEEE marking on the product indicates this product must not be.
2 English GA-5EASV -RH Motherboard T able of Content Item Checklist ......................................................................................... 4 WARNING! ..................................................................................
English 3 T able of Content Chapter 4 INTEL RAID BIOS Configuration ........................................... 6 3 Chapter 5 Application Driver Installation ............................................... 6 8 A. Intel Chipset Software Installation Utilities .
4 English GA-5EASV -RH Motherboard Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.
5 Introduction Chapter 1 Introduction 1.1 Features Summary Form Factor 9.6” x 9.6” m A TX form factor , 4 layers PCB. CPU Supports single Intel ® Pentium ® 4/Pentium ® D processor I.
6 English GA-5EASV -RH Motherboard Hardware Monitor Enhanced features with CPU Vcore, 1.5V reference, VCC3 (3.3V) , VBA T3V , +5VSB, CPUA/B T emperature, and System T emperature V alues viewing .
7 Introduction.
8 English GA-5EASV -RH Motherboard 1. CP U 22. Auxili ary Power (A TX1) 2. Intel Mukilteo-2 23. Auxili ary Power (A TX 12V) 3. Intel ICH7R 24. PCI1 Slot(32bit/33MHz) 4. XGI V olari Z7 25. PCI 2 Slot (32bit/33MHz) 5. Hynix 574U 26. PCI-E x8 Slot 6. ITE IT8718F 27.
9 Introduction 20 2 1 3 4 5 6 7 9 10 11 12 14 13 15 16 17 18 19 21 24 25 26 27 28 29 30 31 32 8 7 33 34 35 37 22 23 36 32.
10 English GA-5EASV -RH Motherboard Chapter 2 Hardware Installation Process 2-1: Installing Processor and CPU Haet Sink Before installing the processor and cooling fan, adhere to the following cautions: 1. The processor will overheat without the heatsink and/or fan, resulting in permanent irreparable damage.
11 Hardware Installation Process 2-1-2: Installing Heat Sink Step 1. Please apply heat sink paste on the surface of the installed CPU. Step 6. Attach the power connector of the heat sink to the CPU fan header located on the motherboard. Heat sink installation is completed.
12 English GA-5EASV -RH Motherboard 2-2: Install Memory Modules GA-5EASV -RH has 4 dual inline memory module (DIMM) sokcets. It supports Dual Channels T echnology . The BIOS will automatically detects memory type and size during system boot. For detail DIMM installation, please refer to the following instructions.
13 Hardware Installation Process T able 1. Supported DIMM Module T ype Size Organization RAM Chips/DIMM 256MB 8MB x 8 x 4 bks 8 16MB x 4 x 4bks 16 512MB 16MB x 8 x 4bks 8 32MB x 4 x 4bks 16 1G B 32MB x 8 x 4bks 8 64MB x 4 x 4bks 16 Installation Steps: 1.
14 English GA-5EASV -RH Motherboard 2-3: Connect ribbon cables, cabinet wires, and power supply 2-3-1 : I/O Back Panel Introduction .
15 Hardware Installation Process LAN LED Description LED1 (Green) LED2 (Green/Y ellow) Color Condition Description Green O N LAN Link / no Access Green BLINK LAN Access - O F F Idle - OF F 10Mbps conn.
16 English GA-5EASV -RH Motherboard 2-4: Connectors Introduction & Jumper Setting 1. A T X 1 12. BA T1 (Battery) 2. A T X 2 13. UF1 (CPU Fan Connector) 3. IDE1 (IDE Connector) 1 4. UF2 (System Fan Connector) 4. FDC1 (Floppy Connector) 15 . UF3 (System Fan Connector) 5.
17 Connector Introduction 1) A TX1 (Auxukiary Power Connector) AC power cord should only be connected to your power supply unit after A TX power cable and other related devices are firmly connected to the mainboard. PIN No. Definition 1 +3.3V 2 +3.
18 English GA-5EASV -RH Motherboard 3 ) IDE1 (IDE Connector) Please connect first harddisk to IDE1. The red stripe of the ribbon cable must be the same side with the Pin1. 4 ) FDC1 (Floppy Connector) Please connect the floppy drive ribbon cables to FDD.
19 Connector Introduction Y ou can connect the Serial A T A device to this connector , it provides you high speed transfer rates (150MB/sec). 5/ 6/ 7/ 8 ) SA T A 1~4 (Serial A T A Connectors) 1 7 Pin No. Definition 1 GND 2T X P 3 TXN 4 GND 5 RXN 6 RXP 7 GND SA T A4 SA T A3 SA T A2 SA T A1 9 ) COM2 2 10 9 Pin No.
20 English GA-5EASV -RH Motherboard Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it.
21 Connector Introduction UF3 13 ) UF1 (CPU Fan Connectors) Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running under abnormal condition or damaged by overheating.The CPU fan connector supports Max. current up to 1A .
22 English GA-5EASV -RH Motherboard 16 ) F_Panel (2X12 Pins Front Panel connector) Please connect the power LED, PC speaker, reset switch and power switch of your chassis front panel to the F_P ANEL connector according to the pin assignment above. 1 2 23 24 Pin No.
23 Connector Introduction Y ou may clear the CMOS data to restore its default values by this jumper. Default value doesn’t include the “Shunter” to prevent from improper use this jumper.
24 English GA-5EASV -RH Motherboard 2-3 Close: Enable CMOS Write Protection Function 1-2 Close: Normal (Default value) 1 1 1 1 20 ) RECCOVERY1 ( BIOS Recovery Function) 1-2 Close: Enable BIOS Recovery function.
Block Diagram 25 2-5: Block Diagram VRD 1 1.0 ISL6306/6326CR CHANNEL A DDRII533/667 Un-Buffered ECC DIMM x 2 CHANNEL B DDRII533/667 Un-Buffered ECC DIMM x 2 INTEL LGA775 Pentium 4/Pentium D Presler / .
26 GA-5EASV-RH Motherboard < Ç > Move to previous item < È > Move to next item < Å > Move to the item in the left hand < Æ > Move to the item in the right hand <Esc> .
27 BIOS Setup z z z z z Main This setup page includes all the items in standard compatible BIOS. z z z z z Adva nced This setup page includes all the items of AMI special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.
28 GA-5EASV-RH Motherboard Syste m Ti me The time is calculated based on the 24-hour military time clock. Set the System Time (HH:MM:SS) Syste m Date Set the System Date. Note that the “Day” automatically changed after you set the date.
29 BIOS Setup Lega cy Diskette A/B This category identifies the type of floppy disk drive A that has been installed in the computer . Disabled Disable this device. 360KB, 5 1/4 in. 3 1/2 inch A T-type high-density drive; 360K byte capacity 1.
30 GA-5EASV-RH Motherboard TYPE 1-39: Predefined types. Users: Set parameters by User. Auto: Set parameters automatically . (Default V aules) CD-ROM: Use for A T API CD-ROM drives or double click [Auto] to set all HDD parameters automatically. A T API Removable: Removable disk drive is installed here.
31 BIOS Setup Advanced Processor Options Figure 1-1: Advanced Processor Option Adva nced Proce ssor Option This category includes the information of CPU Speed, and Processor 1 CPUID. Setup menu for C1 Enhanced Mode, and No Execute Mode Memory Protection .
32 GA-5EASV-RH Motherboard Set Max Ext CPUID = 3 Set MAX CPUID extended function value to 3. Enabled Enable Set Max Ext CPUID = 3 function.
33 BIOS Setup Figure 2: Advanced Adva nced About This Section: Advanced With this section, allowing user to configure your system for basic operation. User can change the processor options, chipset configuration, PCI configuration and chipset control.
34 GA-5EASV-RH Motherboard Memory Configuration Figure 2-1: Memory Configuration Installed Memory/A vaila ble to OS/Used by devices/ DIMM G roup 1,2,3,4 Status These category is display-only which is determined by POST (Power On Self T est) of the BIOS.
35 BIOS Setup PCI Configuration Figure 2-2: PCI Configuration Embedded NIC Onboard LAN Control Enabled Enable onboard LAN device. (Default value) Disabled Disable this function. Option ROM Scan Enabled Enableing this item to initialize device expansion ROM.
36 GA-5EASV-RH Motherboard PCI Slot 1/2/3/4 Option ROM Enabled Enableing this item to initialize device expansion ROM. (Defualt value) Disabled Disable this function.
37 BIOS Setup SIO ITE8718F Configuration Figure 2-3: SIO ITE8718F Configuration.
38 GA-5EASV-RH Motherboard Serial Port A This allows users to configure serial prot A by using this option. Enabled Enable the configuration (Default value) Disabled Disable the configuration. Base I/O Address/IRQ 3F8 Set IO address to 3F8.
39 BIOS Setup Parallel Port This allows users to configure parallel port by using this option. Enabled Enable the configuration. Disabled Disable the configuration. (Default value) Mode This option allows user to set Parallel Port transfer mode.
40 GA-5EASV-RH Motherboard USB Controller This item allows users to enable or disable the USB device by setting item to the desired value. Enabled Enable USB controller. (Default value) Disabled Disbale this function. USB 2.
41 BIOS Setup Seri al A T A Enabled Enables on-board serial A T A function. (Default V alue) Disabled Disables on-board serial A T A function. ` Native Mode Operation This option allows user to set the native mode for Serial A T A function.
42 GA-5EASV-RH Motherboard Advanced Chipset Control Figure 2-4: Advanced Chipset Control Enable Multi media Ti mer Enabled Enable Multimedia Timer support. Disabled Disable this function. (Default value) PCI Express Sub-Menu These items are for debugging the PCI-Express Ports.
43 BIOS Setup PCI Device ` PCI IRQ Line 1/2/3/4 When ACPI device cannot use IRQs already in use by ISA or EISA devices. Use ‘Auto Select’ only if no ISA or EISA legacy cards are installed. Auto Select Auto select ing PCI IRQ lines.
44 GA-5EASV-RH Motherboard Hardware Monitor Figure 2-5: Hardware Monitor CPU / Motherboard/ DD R T emperatur e Display the current CPU temperature, Motherboard, and Ambient temperature. V oltage Monitor: DD R1V8, VCC3, VCORE, 12V2, 5V Detect system's voltage status automatically.
45 BIOS Setup Boot -ti me Di agnostic When this item is enabled, system will shows Diagnostic status when system boot. Enabled Enable Boot-time Diagnostic. Disabled Disable this function. (Default value) Reset Configuration Data Y es Reset all configuration data.
46 GA-5EASV-RH Motherboard Memory Processor Error When Boot is selected, the system will attempt to boot after a memory or proocessor error occured. Boot System attempts to boot if a memory or proocessor error cooured. (Default value) Halt System will stop if an error is detected during power up.
47 GA-5EASV-RH Motherboard Security Figure 3: Security Set User Password Y ou can only enter but do not have the right to change the options of the setup menus. When you select this function, the following message will appear at the center of the screen to assist you in creating a password.
48 GA-5EASV-RH Motherboard Set Supervisor Password Y ou can install and change this options for the setup menus. T ype the password up to 6 characters in lengh and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory .
49 BIOS Setup Server Figure 4: Server.
50 GA-5EASV-RH Motherboard System Management Figure 4-1: System Management Server M a nagement This category allows user to view the server management features. Including information of BIOS V ersion . All items in this menu cannot be modified in user’s mode.
51 BIOS Setup Figure 4-2: Console Redirection Console Redirection BIOS Redirection Port If this option is set to enabled, it will use a port on the motherboard. On-board COMA Use COMA as he COM port address. Disabled Disable this function.
52 GA-5EASV-RH Motherboard Flow Control This option provide user to enable the flow control function. None Not supported. XON/OFF Software control.
53 BIOS Setup Event Log Configuration Figure 4-3: Event Log Configuration Event Log Confuguration This option contains additional setup menu to configure the Event Log Configuration. ` Clear all Event Logs Enter The system event log will be cleared if pressing Enter.
54 GA-5EASV-RH Motherboard Post Error Pause If this item is set to enabled, the system will wai for user intervention on critical POST errors. If this item is disabled, the system will boot with no intervention if possible. Enabled Enable Post Error Pause.
55 BIOS Setup AC-LIN K This option provides user to set the mode of operation if an AC / power loss occurs. Power On System power state when AC cord is re-plugged. Stay Off Do not power on system when AC power is back. Last State Set system to the last sate when AC power is removed.
56 GA-5EASV-RH Motherboard Boot Figure 5: Boot Boot Priority Order This field determines which type of device the system attempt to boot from after PhoenixBIOS Post completed. Specifies the boot sequence from the available devices.
57 BIOS Setup Exit Figure 6: Exit * * * * * About This Section: Exit Once you have changed all of the set values in the BIOS setup, you should save your changes and exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu.
58 GA-5EASV-RH Motherboard Exit Saving Cha nge s This option allows user to exit system setup with saving the changes. Press <Enter> on this item to ask for the following confirmation message: Pressing ‘Y’ to store all the present setting values tha user made in this time into CMOS.
59 BIOS Setup Exit Discarding Cha nge s This option allows user to exit system setup without changing any previous settings values in CMOS. The previous selection remain in effect. This will exit the Setup Utility and restart your compuetr when selecting this option.
60 GA-5EASV-RH Motherboard Load Settup Default This option allows user to load default values for all setup items. When you press <Enter> on this item, you will get a confirm.
61 BIOS Setup Discard Cha nges This option allows user to load previos values from CMOS for all setup item. When you press <Enter> on this item, you will get a confirmation d.
62 GA-5EASV-RH Motherboard Save Cha nge s This option allows user to save setup dat ato CMOS. When you press <Enter> on this item, you will get a confirmation dialog box with a message as below: Press [Y es] to save setup daya to CMOS.
INTEL RAID BIOS Configuration 63 Chapter 4 INTEL RAID BIOS Configuration Configuring the Intel RAID BIOS The Intel RAID BIOS setup lets you choose the RAID array type and which hard drives you want to make part of the array. Entering the RAID BIOS Setup 1.
64 GA-5EASV-RH Motherboard Create RAID V olume Press Enter under Create RAID V olume to set up RAID. Intel(R) Matrix Storage M a nager option ROM V5.0.
INTEL RAID BIOS Configuration 65 The KB is a unit of Strip Size. Y ou can set disk block size with this item. The disk block size can be set from 4KB to 128KB. After you set disk block size, press Enter to set disk Capacity . Intel(R) Matrix Storage M a nager option ROM V5.
66 GA-5EASV-RH Motherboard Press Enter under the Create V olume item. Intel(R) Matrix Storage M a nager option ROM V5.0.0.1011 ICH7R wRAID5 Copyright(C) 2003-04 Intel Corporation.
INTEL RAID BIOS Configuration 67 After the completion, you will see the detailed information about the RAID, such as RAID level, disk block size, disk name and disk capacity, etc. Intel(R) Matrix Storage M a nager option ROM V5.0.0.1011 ICH7R wRAID5 Copyright(C) 2003-04 Intel Corporation.
GA-5EASV-RH Motherboard 68 Revision History Chapter 5 Application Driver Installation 1. Autorun A . Intel Chipset Software Installation Utilities Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show a series of Setup Wizard dialog boxes.
Driver Installation 69 2. InstallShield Wizard Welcome Window 3. License Aggremment 2. Click "Next" to start the installation 3. License Agreement, click "Y es".
GA-5EASV-RH Motherboard 70 4. Readme Information 4. Click "Next" to process the installation. 5. Installation Complete. Restart Computer 5. Installation complete. Select “Y es, I want to restart my computer now” and click “Finish” to reboot system.
Driver Installation 71 1. Click "Intel LAN Driver” item. B. Intel LAN Driver Installation Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show a series of Setup Wizard dialog boxes.
GA-5EASV-RH Motherboard 72 2. Installation Wizard Welcom Window 3. License Agreement 2. Click "Install Driver" Item. 3. Select ‘I accept the term in the license agreement’ and click ‘N.
Driver Installation 73 4. Select Setup T ype Step 4. User can select either Complete or Custom Setup T ypes. Complete setup type allows users to Installs drivers, Intel PROSet for Windows* Device Manager , and Advanced Networking Services.
GA-5EASV-RH Motherboard 74 5. Click "Install" to start installation. 5. Ready to instll program 6. Installation Complete 6. Wizard Completed.
Driver Installation 75 C. XGI VGA Driver Installation Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show a series of Setup Wizard dialog boxes. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.
GA-5EASV-RH Motherboard 76 2. Setup Wizard Window 3. InsallShield Wizard Window 2. Double click "Display Driver". 3. Click "Next" to start the installation.
Driver Installation 77 4. Installaiton Wizard Completed 4. Installation complete. Select “Y es, I want to restart my computer now” and click “Finish” to reboot system.
GA-5EASV-RH Motherboard 78 D. Intel ICH7R RAID Driver Installation Installation Procedures: 1. The CD auto run program starts, Double click on “Intel ICH7R RAID Driver” to make a driver disk. 2. Select a folder refering to your operating system. 3.
Driver Installation 79 2. Starting make a driver disk Insert a floppy disk, and double click the self-extractor file. 3. Formatting and writing in floppy sidk.
GA-5EASV-RH Motherboard 80 E . Matrix Storgae Manager Utility Installation Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.
Driver Installation 81 2. Setup Wizard 3. Warning Information 2 . Click “Next”. 3. Read the information c carefully and click “Next” to start the installation .
GA-5EASV-RH Motherboard 82 4. License Agreement 4 . Click "Y es". 5. Readme Information 5 . Click "Next"..
Driver Installation 83 6. Installaiton Wizard completed 6. Click "Finish" to reboot your system. Installation completed..
GA-5EASV-RH Motherboard 84 F. DirectX 9.0C Driver Installation Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.
Driver Installation 85 2. License Agreement 3. Start Installaiton 3. Click “Next” to start the installation . 2. Select “I accept the agreement andclick "Next" to process the installation.
GA-5EASV-RH Motherboard 86 4. Installaiton Wizard completed 4. Click "Finish". Installation complete..
87 Appendix Appendix : Acronyms Acronyms Meaning ACPI A d vanced Configuration and Power Interface A P M Advanced Power Management A G P Accelerated Graphics Port A M R Audio Modem Riser A C R Advance.
GA-5EASV-RH Motherboard 88 Acronyms Meaning I / O Input / Output IOAPIC I n p u t Output Advanced Programmable Input Controller I S A Industry Standard Architecture L A N Local Area Network L B A Logi.
An important point after buying a device Gigabyte GA-5EASV-RH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GA-5EASV-RH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GA-5EASV-RH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GA-5EASV-RH you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GA-5EASV-RH will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GA-5EASV-RH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GA-5EASV-RH.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GA-5EASV-RH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GA-5EASV-RH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
