Instruction/ maintenance manual of the product UC-322 A&D
Go to page of 12
WM+PD4001090A Precision Health Scale Model UC-322 Before Use Precautions ............................................. 1 Scale Components .................................. 2 Display Symbols ..................................... 3 Inst alling (or Replacing) Batteries .
Scale Component s To p Underside - 2 -.
Display Symbols Symbol BMI User 1 User 2 Flashing Description This symbol appears when the measurement display is stable. This symbol appears when the BMI score is displayed after weight measurement. This symbol appears when you are presetting your height.
Inst alling (or Replacing) Batteries Caution Insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. If you fail these battery directions, it may cause battery leakage.
- 5 - BMI= W eight (kg) Height (m) x Height (m) Measuring Y our W eight on a Carpet Please use the accessory add-on feet if you wish to use the Precision Health Scale on a carpet. S teps for Inst alling the Add-on Feet 1 Each add-on foot has two pins.
Presetting Y our Height The scale can save a height between 30 cm and 220 cm in increments of 0.1 cm. The procedure below is an example of how to preset the height of user 1 to 179.1 cm. 1 With the scale turned off, press and hold the ON/OFF 1 switch.
Measuring Y our W eight (With the preset height) Up to 15 weight data can be saved in memory , each for user 1 and for user 2. Additional measurement s are saved by deleting the oldest data in memory .
Measuring Y our W eight (With no preset height) Up to 15 weight data can be saved in memory , each for user 1 and for user 2. Additional measurements are saved by deleting the oldest dat a in memory . The procedure below is an example of how to measure the weight of user 1, of whose height has not been preset.
Measuring Y our W eight (Guest mode) The guest mode is a procedure to measure a weight without saving the weight data. 1 Press the ON/OFF 1 and ON/OFF 2 switches at the same time. 88888 appears flashing. 2 W ait until the OK symbol appears. W ait until the display 0.
Displaying Dat a Saved in Memory The procedure below is an example of how to display the weight dat a of user 1 that was saved in memory . 1 With the scale turned off, press and hold the ON/OFF 1 switch. T o display the weight data of user 2, press and hold the ON/OFF 2 switch.
Deleting Dat a Saved in Memory The procedure below is an example of how to delete the weight data of user 1 that was saved in memory . 1 With the scale turned off, press and hold the ON/OFF 1 switch. T o delete the weight dat a of user 2, press and hold the ON/OFF 2 switch.
S pecifications Measuring method Electric resistance Digit al display Liquid crystal display , 18 mm character height Maximum cap acity (MAX) 150 kg Minimum display (d) 0.05 kg Power source Four type AA batteries (R6P , 1.5 volt x 4) Battery life Approximately 2000 measurements Dimensions 210 (D) x 295 (W) x 40 (H) mm Weight Appro x.
An important point after buying a device A&D UC-322 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought A&D UC-322 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data A&D UC-322 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, A&D UC-322 you will learn all the available features of the product, as well as information on its operation. The information that you get A&D UC-322 will certainly help you make a decision on the purchase.
If you already are a holder of A&D UC-322, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime A&D UC-322.
However, one of the most important roles played by the user manual is to help in solving problems with A&D UC-322. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device A&D UC-322 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
