Instruction/ maintenance manual of the product M-121704 Jet Tools
Go to page of 24
Operating Instructions and Parts Manual SMH Series Hand Chain Hoists With and Without Overload Protection WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60124 Part No.
2 Warranty and Service WMH Tool Group, Inc. warrants every product it s ells. If one of our tools needs service or repair , one of our Authorized Service Centers lo cated throughout the United States can giv e you qu ick service.
3 Table of Contents Warranty and Service ........................................................................................................... ......................... 2 Table of Contents ........................................................
4 Warning 1. Read and understand this entire manual bef ore attempting assembly or operation. 2. Read and understand the warning s posted on the hoist and in this manual. Failure to comply with all of these warnings may cause serious injury. 3. Replace the warning labels if they become obscu red or removed.
5 blahblahblah 26. Do not force a tool o r attachment to do a job for which it was not designe d. The right tool will do the job better and safer. 27. Use recommended accessories; improper accesso ries may be hazardous. 28. Maintain tools with care. Follow instructions for lubricating the hoist and cha nging accessories.
6 Introduction This manual is provided by WMH Tool Grou p covering the safe operation and maintena nce procedures for a JET Model SM H Series Chain Hoi st. This manual contains instructions on installation, safety precautions, general operating procedures, mainte nance instructio ns and parts breakd own.
7 Using the Chain Hoist Prior to Operation 1. Support for the hoi st may be hook, clevis pin, trolley, or beam clamp. Whatever method of suspension is chosen, the sup port components must be rated equal to, or greater t han the capacity of the chain hoist.
8 Hooking the Load 1. Secure the upper hook. 2. Place the bottom hoo k securely into the object to be lifted. 3. Place ropes or chain in the center of the bottom hook, making sure the safety latch is secure. Never load the hook in front of the safety latch.
9 Hand Chain – Cutting and Installing To cut the hand chain in order to increa se or shorten: 1. Insert one link lengthwise into the vise (Figure 6). Be sure that the side opposite the weld lies completely below the surface of the vise ja w (about 1/3 of a link).
10 Load Chain and Bottom Hook Load Chain Inspection (all models) Over time, the load chain will wear or elongate. This can cause da mage to the hoist, breakage, or non-engagement of the load sheave. Do not operate the hoi st with a twisted, kinked or damaged load chain.
11 Load Chain and Bottom Hook Installation The following procedure assumes that the load chain has been attached t o the chain anchor and fed through the load chain sprocket as described in the previous section. This section completes t he load chain and bottom hook installation.
12 Chain Installation – 10-Ton Hoists Referring to Figure 14: 1. After installing the load chain into the load chain sprocket (B), run the remaining chain through your hand to remove any twist. The last link of the chain must be in the same direction as the first.
13 Inspection and Maintenance Read and follow ANSI Inspec tion and Maintenance Instructions. Know the meaning of Frequent Inspectio n, Periodic Inspection, Normal Service, Heavy Service, and Severe Service. It is the customer’s responsibility to understand and follow all ANSI and JET inspection and maintenance instru ctions.
14 Load Limits Load Chain Capacity 5 Links Normal 5 Links Limit 1/2 ton 2.95" 3.02" 1 ton 3.74” 3.83" 1-1/2 ton 4.13" 4.23" 2 ton 4.72” 4.84" 3 ton 4.13” 4.23" 5 ton 5.31” 5.44" 10 ton 5.31" 5.44" Table 1 Carefully inspect the entire load chain.
15 Parts SMH Chain Hoist.
16 Parts List: 1/2-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001A ............... T op Hook Assy ..................................................... ........................ ............ 1 002 ........... SMH-002A .
17 Parts List: 1-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001B ............... Top Hook Assembly ............................................. ............................ ........ 1 002 ........... SMH-002B ....
18 Parts List: 1-1/2 Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001C ............... Top Hook Assy. .................................................... ........................ ............ 1 002 ........... SMH-002C .
19 Parts List: 2-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001D ............... Top Hook Assembly ............................................. ............................ ........ 1 002 ........... SMH-002D ....
20 Parts List: 3-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001E ............... Top Hook Assembly, Complete ........................... .................................... 1 002 ........... SMH-002E .............
21 Parts List: 5-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001F ................ Top Hook Assembly, Complete ........................... ................................... .1 002 ........... SMH-002F ............
22 Parts List: 10-Ton SMH Chain Hoist Index No. Part No. Description Size Qty 001 ........... SMH-001G ............... Top Hook Assy Complete .................................... ................................ .... 1 002 ........... SMH-002F .......
23 Notes.
24 COMMODITY MODEL SERIAL NO. CAPACITY TEST LOAD DATE OF INSPECTION JUDGEMENT INSPECTOR Chain Hoist SMHX- ________Ton ________Ton P A S S E D LIFT ________ ft.
An important point after buying a device Jet Tools M-121704 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jet Tools M-121704 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jet Tools M-121704 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jet Tools M-121704 you will learn all the available features of the product, as well as information on its operation. The information that you get Jet Tools M-121704 will certainly help you make a decision on the purchase.
If you already are a holder of Jet Tools M-121704, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jet Tools M-121704.
However, one of the most important roles played by the user manual is to help in solving problems with Jet Tools M-121704. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jet Tools M-121704 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
