Instruction/ maintenance manual of the product Digital Radiant Cooktop GE Monogram
Go to page of 24
GE M on ogram ® Owner’s Manual Digital Radiant Cooktop www.monogram.com.
Consumer Information Digital Radiant Cooktop 2 Introduction Your new Monogram cooktop makes an eloquent statement of style, convenience and kitchen planning flexibility.
3 Before using your cooktop Read this manual carefully. It is intended to help you operate and maintain your new cooktop properly. Keep it handy for answers to your questions. If you don’t understand something or need more help, there is a list of toll-free consumer service numbers included in the back section of this manual.
4 IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS When using electrical appliances, basic safety precautions should be followed, including the following: • Read all instructions before using your cooktop. • Have the installer show you the location of the circuit breaker or fuse.
5 SAFETY PRECAUTIONS • Clean the cooktop with caution. If a wet sponge or cloth is used to wipe spills on a hot surface unit, be careful to avoid steam burns.
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS 6 SAFETY PRECAUTIONS • To minimize the possibility of burns, always be certain that the controls for all surface units are at the OFF position, that the cooktop is locked and that the entire glass surface is cool before attempting to clean the cooktop.
Features of Your Cooktop Digital Radiant Cooktop Design information Feature Index (Features and appearances may vary.) Page 1 Warmer Surface Unit 11 2 Single Surface Unit 8, 9 3 Single/Bridge Surface .
Touch Controls Digital Radiant Cooktop 8 How to lock the cooktop IMPORTANT: As a safety feature, you can lock the entire cooktop at any time. To lock the cooktop, press and hold the LOCK pad for 2 seconds. A signal will sound and the lock pad will light indicating the cooktop is locked.
9 Using a single surface unit 1. To turn a surface unit on, touch the ON/OFF pad and touch the INCREASE and/or DECREASE pads to choose the desired heat setting. The display shows your heat setting. 2. To turn a surface unit off, touch the ON/OFF pad again.
Touch Controls Digital Radiant Cooktop 10 Using the bridge surface unit The controls can be used to create an oblong heated area. Because of its bigger dimensions, larger pans can be used on the bridge surface unit. Choose pans that match the bridge surface unit area as closely as possible.
11 Cooking guide for using heat settings High (H) —Quick start for cooking; brings water to a boil. Medium High (7–9) —Fast fry, pan broil; maintains a fast boil on large amounts of food. Medium (4–6) —Sauté and brown; maintains a slow boil on large amounts of food.
Touch Sensor Controls Digital Radiant Cooktop 12 Function error code If an error occurs in the control operation, all the displays will flash “E” or “F” and the cooktop will beep. To correct: 1. Touch any ON/OFF pad to reset the control. 2. If this corrects the problem, set the control to the desired setting to begin cooking again.
13 Cookware Tips Digital Radiant Cooktop Types of cookware The following information will help you choose cookware which will give good performance. Stainless Steel: recommended Especially good with a sandwich clad bottom.
Cookware Tips Digital Radiant Cooktop 14 For best results • Place only dry pans on the surface units. Do not place lids on the surface units, particularly wet lids. • Do not use woks that have support rings. This type of wok will not heat on glass surface units.
Home Canning Tips Digital Radiant Cooktop Observe the following points in canning Note: Flat-bottomed canners are required for glass cooktops. Right! Wrong! Pots that extend beyond 1 inch of the surface unit’s circle are not recommended for most surface cooking.
16 Glass Cooktop Cleaning Digital Radiant Cooktop Burned-on residue WARNING: DAMAGE to your glass surface may occur if you use scrub pads other than BLUE Scotch- Brite® Multi-Purpose No Scratch scrub sponges by 3M. 1. Allow the cooktop to cool. 2. Spread a few drops of Cerama Bryte® to the entire burned residue area.
17 Metal marks and scratches 1. Be careful not to slide pots and pans across your cooktop. It will leave metal markings on the cooktop surface. These marks are removable using the cleaning cream with a scrub sponge and/or razor scraper.
The Problem Solver Digital Radiant Cooktop 18 Questions? Use this problem solver! PROBLEM POSSIBLE CAUSE FAN SOUND • A cooling fan will start and run as soon as any surface unit is turned on. This is to insure safe and reliable operation of the cooktop.
19 Questions? Use this problem solver! PROBLEM POSSIBLE CAUSE FREQUENT CYCLING • Incorrect cookware used. Use only flat cookware to minimize cycling. OFF AND ON OF RADIANT SURFACE UNITS SURFACE UNITS DO • You may not notice the surface units glowing unless you are using NOT GLOW RED a higher heat setting.
20 Consumer Services Digital Radiant Cooktop With the purchase of your new Monogram appliance, receive the assurance that if you ever need information or assistance from GE, we’ll be there. All you have to do is call—toll- free! GE Answer Center ® In the USA: 800.
21 General Electric Company Warranty Registration Department P.O. Box 32150 Louisville, KY 40232-2150 Place 1st Class Letter Stamp Here GE Appliances Consumer Product Ownership R egistration Important.
22 Consumer Product Ownership R egistration Dear Customer: Thank you for purchasing our product and thank you for placing your confidence in us. We are proud to have you as a customer! Follow these three steps to protect your new appliance investment: 1 Complete and mail your Consumer Product Ownership Registration today.
23 YOUR MONOGRAM COOKTOP WARRANTY Staple sales slip or cancelled check here. Proof of original purchase date is needed to obtain service under warranty.
Part No. 164D3333P129 -2 Pub No. 49-8894 -2 Printed in the United States 12-00 JR ZEU304 ZEU365 ZEU36WMR 24 YOUR MONOGRAM COOKTOP WARRANTY Staple sales slip or cancelled check here. Proof of original purchase date is needed to obtain service under warranty.
An important point after buying a device GE Monogram Digital Radiant Cooktop (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE Monogram Digital Radiant Cooktop yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE Monogram Digital Radiant Cooktop - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE Monogram Digital Radiant Cooktop you will learn all the available features of the product, as well as information on its operation. The information that you get GE Monogram Digital Radiant Cooktop will certainly help you make a decision on the purchase.
If you already are a holder of GE Monogram Digital Radiant Cooktop, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE Monogram Digital Radiant Cooktop.
However, one of the most important roles played by the user manual is to help in solving problems with GE Monogram Digital Radiant Cooktop. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE Monogram Digital Radiant Cooktop along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
