Instruction/ maintenance manual of the product JP950 GE
Go to page of 8
1 TOOLS YOU WILL NEED MA TERIALS YOU WILL NEED 31-10603 (12-04 JR) Installation 30 ″ Electric Cooktop Instructions BEFORE YOU BEGIN Read these instructions completely and carefully . • IMPOR T ANT — Save these instructions for local inspector’ s use.
2 Installation Instructions FOR YOUR SAFETY • For Personal Safety , remove house fuse or open circuit breaker before beginning installation. Failure to do so could result in serious injury or death. • Be sure your cooktop is installed properly by a qualified installer or service technician.
O N H O T 3 Installation Instructions W ARNING – The electrical power to the cooktop supply line must be shut off while connections are being made. Failure to do so could result in serious injury or death. When preparing cooktop opening, make sure the inside of the cabinet and the cooktop do not interfere with each other .
CUTOUT DIMENSIONS OF THE COUNTERTOP T o insure accuracy , it is best to make a template when cutting the opening in the counter . JXTR32X CUTOUT FILLER TRIM KIT : A filler trim kit is available for use if your countertop cutout is larger than the dimensions shown, up to 29-13/16 ″ x 20-7/16 ″ .
5 Installation Instructions INST ALLING THE JUNCTION BOX Install an approved junction box where it will be easily reached through the front of the cabinet where the cooktop will be located. The cooktop conduit is 3 feet long. IMPOR T ANT : The junction box must be located where it will allow considerable slack in the conduit for serviceability .
6 Installation Instructions INSERT COOKTOP INTO CUTOUT Insert the cooktop centered into the cutout opening. Make sure the front edge of the countertop is parallel to the cooktop. Make final check that all required clearances are met. 6 INST ALLING THE COOKTOP (CONT .
7 Installation Instructions When making the wire connections, use the entire length of conduit provided. The conduit must not be shortened. With the cooktop in place, open the front of the cabinet door . Insert the wires from the conduit through the opening of the junction box.
8 Installation Instructions PRE-TEST CHECKLIST Remove all protective film, if present, and any stickers. Check to be sure that all wiring is secure and not pinched or in contact with moving parts. Check level of appliance. Check that the cooktop is properly grounded.
An important point after buying a device GE JP950 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE JP950 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE JP950 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE JP950 you will learn all the available features of the product, as well as information on its operation. The information that you get GE JP950 will certainly help you make a decision on the purchase.
If you already are a holder of GE JP950, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE JP950.
However, one of the most important roles played by the user manual is to help in solving problems with GE JP950. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE JP950 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
