Instruction/ maintenance manual of the product SK-10KWP A&D
Go to page of 10
- 0 - ふ SK-1000WP SK-2000WP SK-5000WP SK-5001WP SK-10KWP SK-20KWP SK-30KWP 1WM PD4000461B.
- 1 - SAFETY PRECAUTIONS All safety messages are identified by the following, “ WA R N I N G ” or “ CAUTION ”, of ANSI Z535.4 (American National S tandard Institute: Product Safety Signs and Labels). The meanings are as follows: W ARNING A potentially hazardous situation which, if not avoided, could result in death or serious injury .
- 2 - PARTS DESCRIPTION DISPLAY Weighing unit for (k)g-lb model only. Weighing Platform Spirit level Display ON/OFF key Turns the scale power on/off. UNITS key (only for (k)g- lb model) Changes weighing units, (k)g or lb. RE-ZERO key Sets display to zero or subtracts weight of a container.
- 3 - PREPARATION Installing Batteries / Connecting the AC Adapter Installing Batte ries CAUTION Wh en re p l a ci n g batteries, be careful not to apply too mu ch force to th e weighing plat form . An excessive force could damage the scale. Unlock and remove the battery cover.
- 4 - WEIGHING Before Weighing Automatic Power- Off Function. If the scale is left ON and the stable indicator is displayed, the automatic power-off function turns the power off after approximately five minutes (factory setting). To disable or enable the function, press the [ON/OFF] key while pressing the [RE-ZERO] key.
- 5 - CALIBRATION When to Calibrate Calibration may be required when the scale is initiall y installed, if it is moved a substantial distance, or in accordance with local regulations. This is necessary because the weig ht of a mass in one location is not necessarily the same in another location.
- 6 - Calibration by Gravity Compensation If you have calibration weights at the capacity of the scale, you can calibrate the scale with the weights instead of compensating for the gravity acceleration. The scale is calibrated at 9.798 m/sec 2 at the factory.
- 7 - SPECIFICATIONS Model SK-1000WP SK-2000WP SK-5000WP SK-5001WP SK-10KWP SK-20KWP SK-30KWP Capacity 1000 g 2.2 lb 2000 g 4.4 lb 5000 g 11 lb 5000 g --- 10 kg 22 lb 20 kg 44 lb 30 kg 66 lb Resolution 0.5 g 0.001 lb 1 g 0.002 lb 2 g 0.005 lb 1 g --- 0.
- 8 - World Map.
- 9 - 3-23-14 Higashi-Ikebukuro, Toshim a-ku, Tokyo 170-0013 JAPAN Telephone: [81] (3) 5391-61 32 Fax: [81] (3) 5391-6148 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131 U.
An important point after buying a device A&D SK-10KWP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought A&D SK-10KWP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data A&D SK-10KWP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, A&D SK-10KWP you will learn all the available features of the product, as well as information on its operation. The information that you get A&D SK-10KWP will certainly help you make a decision on the purchase.
If you already are a holder of A&D SK-10KWP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime A&D SK-10KWP.
However, one of the most important roles played by the user manual is to help in solving problems with A&D SK-10KWP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device A&D SK-10KWP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
