Instruction/ maintenance manual of the product 100 Garmin
Go to page of 26
Alpha ™ 100 and TT ™ 10 Owner’s Manual May 2013 190-01500-00_0B Printed in Taiwan.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Getting Started ............................................................... 1 Setting Up the Alpha System ..................................................... 1 Device Overviews ..................................................
Setting an Alarm ...................................................................... 12 Starting the Countdown Timer ................................................. 12 Opening the Stopwatch ........................................................
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Alpha System NOTICE Avoid using a high-powered radio (greater than 5 watts) in close proximity to the device.
4 Press the battery into place. 5 Replace the battery cover, and turn the D-ring clockwise. Charging the Handheld Device NOTICE To prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer.
Dog Collar Device Setup Methods to Add a Dog to a Handheld Device If you purchased the collar and the handheld device separately, you must add the collar to the handheld device.
2 Select a dog. 3 Select Show Info > > Change Dog Type . 4 Select a dog type. Changing the Dog ID Before you can change the dog ID, the collar must be turned on and within range of the handheld device. If you are experiencing interference from other collars or handheld devices in the area, you might need to change the ID for the dog.
Tracking Your Dog on the Map Before you can track a dog or contact on the map, you must add them to the handheld device ( page 3 and page 8 ). You can view the dog's location and other contacts' locations on the map. 1 Select . 2 If necessary select and to zoom in and out of the map.
1 Select Setup > Location Alerts > Add Alert > Radius . 2 Select the unit of measurement. 3 Enter the radius distance, and select . Editing Location Alerts 1 Select Setup > Location Alerts . 2 Select an alert. 3 Select an option: • Select Disable to turn off notifications for this alert.
With plenty of repetition, consistency, patience, and a lot of praise, the dog should begin to obey these commands after several lessons. Each dog learns at a different rate, and some dogs may take longer to learn these commands.
dog as long as the key is held, for a maximum of 8 seconds. Your stimulations should typically be far shorter than 8 seconds. Continuous stimulation can be useful when first starting training with your dog. You can also train using a tone ( T ). When you select T for a key, the key press activates an audible tone instead of stimulation.
Changing Your Contact ID If you are experiencing interference from other collars or handheld devices in the area, you might need to change the contact ID for your handheld device. 1 Select Setup > Contacts > Pairing Setup > ID . 2 Select a contact ID that is not yet assigned to another device in the area.
3 Select > Average Location . 4 Move to the waypoint location. 5 Select Start . 6 Follow the on-screen instructions. 7 When the confidence status bar reaches 100%, select Save . For best results, collect 4 to 8 samples for the waypoint, waiting at least 90 minutes between samples.
2 Select TracBack . The map page opens with your route marked with a magenta line. 3 Navigate using the map ( page 11 ) or the compass ( page 11 ). Changing the Track Color 1 Select > Track Manager . 2 Select a track. 3 Select Set Color . 4 Select a color.
Where To? Menu You can use the Where To? menu to find a destination to navigate to. Not all Where To? categories are available in all areas and maps. Finding a Waypoint by Name 1 Select > Where To? > Waypoints > > Spell Search . 2 Enter the name.
Satellite Page The satellite page shows your current location, GPS accuracy, satellite locations, and signal strength. Changing the Satellite View By default, the satellite view is with North at the top. You can change the view of the satellites to be oriented with your current track toward the top of the screen.
Automotive Mode shows an automotive perspective with the direction of travel at the top. Guidance Text : Sets when the guidance text on the map is shown. Dashboard : Selects a dashboard to display on the map. Each dashboard shows different information about your route or your location.
Marine Alarm Setup : Sets alarms for when you exceed a specified drift distance while anchored, when you are off course by a specified distance, and when you enter water of a specific depth. Device Information Viewing Device Information You can view the unit ID, software version, and license agreement.
2 Use the slider to adjust the backlight level. The device may feel warm when the backlight setting is high. Adjusting the Backlight Timeout You can decrease the backlight timeout to maximize the battery life. 1 Select Setup > Display > Backlight Timeout .
Connecting the Collar to a Computer NOTICE To prevent corrosion, thoroughly dry the contacts on the collar and the surrounding area before connecting the charging clip. You can connect the collar to your computer to use with programs like BaseCamp. The collar is not a mass storage device.
Removing the Old Battery Before you replace the battery, you must remove all dirt, water, and debris from the device. Also, you need a small Phillips screwdriver. 1 Remove the six screws from the outer edges of the back plate. TIP: You should leave the two inner screws in place.
Bearing : The direction from your current location to a destination. You must be navigating for this data to appear. Cadence : The revolutions of the crank arm or strides per minute. Your device must be connected to a cadence accessory. Course : The direction from your starting location to a destination.
Index A accessories 1, 17 alarms clock 12 marine 14 proximity 12 tones 13 alerts dog 4 location 5, 6 almanacs 12 altimeter 14 calibrating 12 ANT+ sensors, pairing 17 A.
.
www.garmin.com/support 913-397-8200 1-800-800-1020 0808 238 0000 +44 870 850 1242 1-866-429-9296 +43 (0) 820 220 230 +32 2 672 52 54 +45 4810 5050 +358 9 6937 9758 + 331 55 69 33 99 +49 (0)180 6 42764.
An important point after buying a device Garmin 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin 100 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin 100.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
