Instruction/ maintenance manual of the product Tilt 'N Plug Interconnect Box TNP100AU Altinex
Go to page of 13
ACCESSORIES MANUAL PART NUMBER: 400-0115 -00 1 PRODUCT REVISION: 1 T NP 1 00AU UN Tilt ‘ N P lug ™ I nterconnect B ox FOR AUSTRALIA USER'S GUIDE.
ACCESSORIES 1 INTRODUCTION Your purchase of the TNP 100 AU Tilt ‘N Plug™ Interconnect Box is greatly app reciated. We are sure you will find it reliable and simple to use. Superior performance for the right price, backed by solid technical and customer support is what ALTINEX has to offer.
ACCESSORIES 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your T NP 1 00AU Interconnect Box. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your T NP 1 00AU and to prevent fire and shock hazard.
ACCESSORIES 3 cause harmful interference in which case the user will be required to correct the interference at his own expense. • Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.
ACCESSORIES 4 T NP 1 00AU DIMENSIONS 4 Diagrams: 1A, 1B, 1 C , & 1D.
ACCESSORIES 5 DESCRIPTION DIAGRAM 5 Diagram 2: Label of P roduct APPLICATION DIAGRAM 6.
ACCESSORIES 6 Diagram 3 : Application.
ACCESSORIES 7 Diagram 4: Final Installation.
ACCESSORIES 8 Diagram 5 : Table Cutout Requirements.
ACCESSORIES 9 INSTALLATION 6 Step 1 . Cut an opening into the table’s surface . Refer to diagram 5 on page 8 of the manual for table cutout requirements . Note: The table can be 3 inches or thinner in thickness . Always confirm dimensions before cutting to insure that specifications have not changed.
ACCESSORIES 10 OPERATION 7 7.1 HOW TO RELEASE AND REPLACE THE GAS SPRING To replace the spring, push up, and turn the knob in the center on the bottom of the TNP100AU by 90 degrees, thereby releasing the gas spring. Unscrew the knob, and then unscrew the gas spring itself from the TNP100AU .
ACCESSORIES 11 Model No. Description VGA MALE TO MALE (HD-15) HIGH RESOLUTION CABLE CB37xxMR xx = available length of 3ft, 6ft, 15ft, 25ft, ö ö 50ft, ö ö 75ft, ö ö 100ft, & ö ö 1 50ft VGA .
ACCESSORIES 12 TROUBLESHOOTING GUIDE 10 The T NP 1 00AU supplied unit was carefully tested and no problems were detected ; however , we would like to offer the following suggestions: • If there is no power, check to see if the 5A circuit breaker is tripped.
An important point after buying a device Altinex Tilt 'N Plug Interconnect Box TNP100AU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex Tilt 'N Plug Interconnect Box TNP100AU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex Tilt 'N Plug Interconnect Box TNP100AU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex Tilt 'N Plug Interconnect Box TNP100AU you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex Tilt 'N Plug Interconnect Box TNP100AU will certainly help you make a decision on the purchase.
If you already are a holder of Altinex Tilt 'N Plug Interconnect Box TNP100AU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex Tilt 'N Plug Interconnect Box TNP100AU.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex Tilt 'N Plug Interconnect Box TNP100AU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex Tilt 'N Plug Interconnect Box TNP100AU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
