Instruction/ maintenance manual of the product PNP200 Altinex
Go to page of 13
ACCESSORIES MANUAL PART NUMBER: 400-0057-003 PRODUCT REVISION: 3 PNP200 P Pop ‘N Plug™ Interconnect Box USER'S GUIDE _________ USER’S GUIDE.
ACCESSORIES 1 1 INTRODUCTION Your purchase of the PNP200 Interconnect Box is greatly appreciated. We are sure you will find it reliable and simple to use. Superior performance for the right price, backed by solid technical and customer support is what Altinex has to offer.
ACCESSORIES 2 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your PNP200 Interconnect Box. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your PNP200 and to prevent fire and shock hazard.
ACCESSORIES 3 3 ABOUT YOUR PNP200 2 The PNP200 is designed for installation into a conference room table. The Pop ‘N Plug™ Interconnect Box ( PNP200 ) provides a means of connecting audio, video, control, and computer video sources into a presentation system.
ACCESSORIES 4 4 PNP200 DIMENSIONS 4 Diagrams: 1A, 1B, 1C, & 1D PNP200 DIMENSIONS *( con’t) Diagram 2: Back View.
ACCESSORIES 5 5 Diagram 2: Back View of PNP200.
ACCESSORIES 6 6 APPLICATION DIAGRAM 5 Diagram 3: Application.
ACCESSORIES 7 7 Diagram 4: Final Installation.
ACCESSORIES 8 8 Diagram 5: Table Cutout Requirements.
ACCESSORIES 9 9 INSTALLATION 6 Step 1 . Make sure the gas spring is not compressed when you remove the locking screw. To release the gas spring, push down and turn the knob in the center of the bottom of the PNP200 by 90 degrees. Remove the lock down screw from the PNP200 .
ACCESSORIES 10 10 unit. Do not keep the cord too tight or too loose (See Diagram 4, page 6). Figure 4: Mounting Brackets Step 7. Make that the provided ground wire assembly is secured to the threaded nut located on the bottom of the housing of the PNP200 with a star-washer and a 4-40 screw as shown in Diagram 4, page 6.
ACCESSORIES 11 11 Under normal conditions the gas spring will last up to five years. ACCESSORIES 8 Model No. Description VGA MALE TO MALE (HD-15) HIGH RESOLUTION CABLE CB37xxMR xx = available length o.
ACCESSORIES 12 12 TROUBLESHOOTING GUIDE 9 The PNP200 supplied unit was carefully tested and no problems were detected; however, we would like to offer these suggestions. • Please make sure that the Fuse is of a 10 Amps rating. • Please make sure that the highest quality video, audio, network, and telephone cables or connectors are used.
An important point after buying a device Altinex PNP200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex PNP200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex PNP200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex PNP200 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex PNP200 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex PNP200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex PNP200.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex PNP200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex PNP200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
