Instruction/ maintenance manual of the product MT108-104 Altinex
Go to page of 11
MULTI-TASKER MANUAL PART NUMBER: 400-0178-002 MT108-104/MT108-105 4-IN, 4-OUT STEREO AUDIO LINE DRIVER CARDS FOR MULTI-TASKER USER’S GUIDE TM MT108-104 is shown above.
MULTI-TASKER 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 1.1 GENERAL ................................ .................. 2 1.2 INSTALLATION ................................ .......... 2 1.3 CLEANING ........................
MULTI-TASKER 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT108-104/(105) Line Driver. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT108-104/(105) and to prevent fire and shock hazard.
MULTI-TASKER 3 ABOUT YOUR MT108-104/(105) 2 MT108-104/(105) 4-in 4-out Stereo Audio Line Driver Cards The MT108-104/(105) is a Stereo Audio Line Driver Card designed for use with the Multi- Tasker system.
MULTI-TASKER 4 DESCRIPTION OF MT108-104/(105) 4 APPLICATION DIAGRAM 5 Application 1.
MULTI-TASKER 5 Application Diagram 2: Internal View of the MT108-104/(105).
MULTI-TASKER 6 INSTALLING YOUR MT108-104/(105) 6 Step 1. Slide the MT108-104/(105) into an available slot in the Multi-Tasker™ Basic Enclosure in order to connect to the bus.
MULTI-TASKER 7 Example: If one MT108-105 card is plugged in slot #2 of unit 3: Send the command [VERC2U3] , and the Multi -Tasker™ Basic Enclosure will return the following feedback: MT108-105 690-0127-007 690-0127-007 = software version MT108-105 = card type: MT108-105 2.
MULTI-TASKER 8 Example: If cards 1, 2, and 3 are grouped as group 5 of unit 1, send the command [SEL1G5U1]. Then send the commands [ + ], and [ - ] to increase or decrease the volume for cards 1, 2, and 3 simultaneously. 5. [SEL] This command selects the individual input for adjusting the volume level of each output.
MULTI-TASKER 9 Ui = unit number (i = # from 0-9) Example: To group cards #1, 2, and 3 as group 5 of unit #1, send the command [WRC1C2C3G5U1]. After executing this command, cards 1, 2, and 3 of unit 1 will be grouped together as group 5. 11. [RD] This command displays the members in each group.
MULTI-TASKER 10 source is working and there is still no sound, see Cause 2. Cause 2: The card output is turned OFF. Solution 1: Turn ON the card output that is used. See RS-232 accessible commands in section 7. If no sound is present, see Solution 2. Solution 2: If the re is still no sound, see Cause 3.
An important point after buying a device Altinex MT108-104 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MT108-104 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MT108-104 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MT108-104 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MT108-104 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MT108-104, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MT108-104.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MT108-104. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MT108-104 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
