Instruction/ maintenance manual of the product HV-15KV-WP A&D
Go to page of 72
Wate rproo f Di gital Pla tform Sca le HV -15KV -WP HV -60KV -WP HV -200KV -WP HW -10KV -WP HW -60KV -WP HW -100KV -WP HW -200KV -WP W M : PD400021 1A.
This is a hazard alert m ark . This mark inf orms y ou about the oper ation of th e produc t. Note This manual is subjec t to change witho ut notice at an y time to impr ove the product. No part of this m anual ma y be photocop ied, repro duced, or trans lated into ano ther langua ge without the prior written cons ent of the A&D Company .
©A&D Co. ltd., HV- W P/HW-WP Series Instruct i on Manual Internationa l Version 1895 -2A-IE 001 1 Contents 1. Compliance ........................................................................................ 3 1.1.1. Compliance w ith FCC rules .
Page 2 HV-WP/HW-WP Serie s 13.1. Preparati on (Setti ng Par ameters) ................................................ 37 13.2. Operation a nd Per formance ( Examples) ..................................... 38 14. Calibration (Adjusting the Sc ale).....
HV-WP/HW-WP S eries Page 3 2. Outlin e and Feat ures 1. 1. 1. 1. Compliance Compliance Compliance Compliance 1.1.1. 1.1.1. 1.1.1. 1.1.1. Compliance with FCC rules Compliance with FCC rules Compliance with FCC rules Compliance with FCC rules Please note t hat this eq uipment ge nerates, uses a nd can r adiat e radio freque ncy energy .
Page 4 HV-WP/HW-WP Serie s 2. Outlin e and Feat ures 2. 2. 2. 2. Outline an d Featur e Outline an d Featur e Outline an d Featur e Outline an d Featur e s s s s These scales ar e designed to co mply w.
HV-WP/HW-WP S eries Page 5 3. Unp acking 3. 3. 3. 3. Unpacki ng Unpacki ng Unpacki ng Unpacki ng.
Page 6 HV-WP/HW-WP Serie s 3. Unp acking 3.1. 3.1. 3.1. 3.1. Accessori es and Options li st Accessories and Options list Accessories and Options list Accessories and Options list Accesso ries for the .
HV-WP/HW-WP S eries Page 7 4. Cauti on 4. 4. 4. 4. Caution Caution Caution Caution 4.1. 4.1. 4.1. 4.1. Precautions for Installing the Scale Precautions for Installing the Scale Precautions for Installing the Scale Precautions for Installing the Scale Ground the scale , so that th e user w ill not be subjected to an electric shock.
Page 8 HV-WP/HW-WP Serie s 5. Installing the Scale 5. 5. 5. 5. Installing the Sc ale Installing the Scale Installing the Scale Installing the Scale This procedure includes all of the steps fo r installing the HV-W P s eries and H W -W P series. There fore, on some products, t here ar e some unn ecessary steps.
HV-WP/HW-WP S eries Page 9 5. 1. Remov ing th e plo e 5.1. 5.1. 5.1. 5.1. Removing the Removing the Removing the Removing the pole pole pole pole Caution Remove th e main power plug from the recept acle befo re remov ing the pole.
Page 10 HV-WP/HW-WP Series 5. 1. Remov ing th e plo e Step 8 Removi ng the pole base fro m the base unit , requir es the foll owing allen wrench. HV-15KV- W P, HV-60KV- W P, H W -10KV- W P, H W -60KV-.
HV-WP/HW-WP S eries Page 11 6.Nam es 6. 6. 6. 6. Names Name s Name s Name s.
Page 12 HV-WP/HW-WP Series 6.1. Di splay and S ymbol s 6.1. 6.1. 6.1. 6.1. Display and Symbols Display and Symbols Display and Symbols Display and Symbols Displ ay and Sy mbols Meaning A Stability ma rk. W hen the curren t weighin g value is sta ble, this mark is display ed, indi cating a con dition w here the v alue is readabl e.
HV-WP/HW-WP S eries Page 13 6.1. Di splay and S ymbol s Displ ay and Sy mbols Meaning A Example. Storing the un it mass of the c ounting mode. This is a displ ay of z ero point for the c ou nting m ode an d uses 20 pi eces for th e registr ation. A A A A Example.
Page 14 HV-WP/HW-WP Series 6.2. S witc hes Displ ay and Sy mbols Meaning A An error w here the weig hing v alue is unstabl e due to drift, v ibration or oth er, w hen turning on the scale. Check around the weighi ng pan. Check the co nnection o f load cel l cable.
HV-WP/HW-WP S eries Page 15 6.2. S witc hes Displ ay and Sy mbols Meaning A Set switch. Turns the co mparator on/ off. (Refer to f6 ) Counting mode, it is used to enter t he mode to stor e the unit mass. Percentag e mode, i t is u sed to enter th e mode to store the 100% mass.
Page 16 HV-WP/HW-WP Series 7. Basi c Ope ration 7. 7. 7. 7. Basi c Operation Basic Ope ration Basic Ope ration Basic Ope ration 7.1. 7.1. 7.1. 7.1. Turing Turing Turing Turing the Sc ale on/off and We.
HV-WP/HW-WP S eries Page 17 7. Basi c Ope ration 7.2. 7.2. 7.2. 7.2. Tare (And Net Di splay) Tare (A nd Net Di splay) Tare (A nd Net Di splay) Tare (A nd Net Di splay) "Tare" is use d to cancel the mass of a container , receptacl e, case, bag, etc.
Page 18 HV-WP/HW-WP Series 7. Basi c Ope ration 7.3. 7.3. 7.3. 7.3. Weighing Range for Weighing Range for Weighing Range for Weighing Range for the the the the HV-WP series HV-W P series HV-W P series HV-W P series Thi s is t he fun cti on t o selec t a w eig hing r ang e for th e H V -W P se ri es .
HV-WP/HW-WP S eries Page 19 7. Basi c Ope ration 7.4. 7.4. 7.4. 7.4. Mod e Mod e Mod e Mode Switch Switch Switch Switch ( Changing Unit and M ode) (Changing Un it and Mode) ( Changing Unit and Mode) (Changing Un it and Mode) Pressing the MODE switch, the display changes as follow s.
Page 20 HV-WP/HW-WP Series 7. Basi c Ope ration Explan ation The status of "Inactive comparator ( f6 )" is that comparator function ( f6 0 , f6 2 , f6 4 , f6 6 ) is selected and the comparator is not used. T he "active" or "Inactive" (ON/OFF) for the comparator can be selected by pressing the SET s witch alternately.
HV-WP/HW-WP S eries Page 21 8. C ountin g Mode 8. 8. 8. 8. Counting Mode Counting Mode Counting Mode Counting Mode The counting mo de is the func tion to conver t the total mass value (t otal weight) of articles to a count, when e ach of these articles ass ume the same mass value.
Page 22 HV-WP/HW-WP Series 8. C ountin g Mode 8.2. 8.2. 8.2. 8.2. Counting t he number o f Counting t he numbe r of Counting t he numbe r of Counting t he numbe r of article article arti cle articles s s s Step 1 Press the MODE switch to display the unit .
HV-WP/HW-WP S eries Page 23 9. P ercentage Mode 9. 9. 9. 9. Percentage Mode Percentage Mode Percentage Mode Percentage Mode The percent mode is the function to display a mass value in the unit of "%". Store a 1 00% mass value, i n adv ance, to use t his function.
Page 24 HV-WP/HW-WP Series 9. Percen tage Mo de 9.2. 9.2. 9.2. 9.2. Reading p ercentage Reading per centage Reading per centage Reading per centage Step 1 Press the MODE switch to display the unit %. Step 2 Store the unit mass of the article. Refer to "9 .
HV-WP/HW-WP S eries Page 25 10. Accum ulation Function 10. 10. 10. 10. Accumu lation Fu nction Accumu lation Functio n Accumu lation Functio n Accumu lation Functio n This functi on counts the n umber of wei ghed ite ms, calculat es the total mass v a lue and can display the numb er and accumulat ed mass val ue.
Page 26 HV-WP/HW-WP Series 10. A ccumulati on F unction Function table Meaning and pur pose A f8 4 W hen the disp lay is a st able valu e, th e scale acc umula tes the dat a automatic ally . The nex t accumulatio n can be perfor med aft er the display is nearl y-z ero.
HV-WP/HW-WP S eries Page 27 10. Accum ulation Function 10.2. 10.2. 10.2. 10.2. Oper ati on and P erf orm ance (E xamp les) Oper ation and P erf orman ce (E xamp les) Oper ation and P erf orman ce (E xamp les) Oper ation and P erf orman ce (E xamp les) Example 1 W eig hing each arti cle, the scale makes t he accumulation ac cording to f8 3 .
Page 28 HV-WP/HW-WP Series 1 1 . U pper/ Lower C ompa rator Fun cti on 11. 11. 11. 11. Upper/Lower Comparator Func tion Upper/Lower Comparator Func tion Upper/Lower Comparator Func tion Upper/Lower Comparator Func tion This function c ompares a dis play value w ith the upper li mit (HI), th e lower limit ( LO) and display s the result.
HV-WP/HW-WP S eries Page 29 1 1 . U pper/ Lower C ompa rator Fun cti on Function table Meaning and pur pose A f6 7 W hen the dis play va lue beco mes s table and not near ly-zero , th e scale comp ares the v alue. A A Caution The upper limit value (HI) must be gr eater than the lower limit v alue (LO).
Page 30 HV-WP/HW-WP Series 1 1 . U pper/ Lower C ompa rator Fun cti on Step 6 If either o f f6 0 , f6 2 , f6 4 , f6 6 has been selected, press the SET switch to use the comparat or. Step 7 Press the MODE switch to display the blinking HI. Ste p 8 Set the upper l imit v al ue by usi ng the follow in g switches.
HV-WP/HW-WP S eries Page 31 1 1 . U pper/ Lower C ompa rator Fun cti on 11.2. 11.2. 11.2. 11.2. Oper ati on and P erf orm ance (E xamp les) Oper ation and P erf orman ce (E xamp les) Oper ation and P .
Page 32 HV-WP/HW-WP Series 12. Ful l/Dribb le Batch Funct ion 12. 12. 12. 12. Full/Dribble Batch Function Full/Dribble Batch Function Full/Dribble Batch Function Full/Dribble Batch Function This funct.
HV-WP/HW-WP S eries Page 33 1 2. Full /Dribbl e Batch Functi on Caution The comparison of t he full/dribble bat ch function is a on e way sequence (not reversible) . If th e display value becomes less than t he fin al value after the value reached a predetermined t arget v a lue, neither HI or LO is on.
Page 34 HV-WP/HW-WP Series 12. Ful l/Dribb le Batch Funct ion 12.1. 12.1. 12.1. 12.1. Preparation (Se tting Parameters) Preparation (Se tting Parame ters) Preparation (Setting Parame ters) Preparation (Se tting Parame ters) Step 1 Turn off th e display .
HV-WP/HW-WP S eries Page 35 1 2. Full /Dribbl e Batch Functi on Step 8 Press the MODE switch to display the blinkin g HI (of the final val ue). Step 9 Set the fi nal value using the follow ing switches. ∧ switch Sele cting t he numb er of a figure. ＜ switch Selecting a figu re.
Page 36 HV-WP/HW-WP Series 13. Simp le Batch Function 13. 13. 13. 13. Simple Batch Function Simple Batch Function Simple Batch Function Simple Batch Function This functi on com paires a displ ay value wi th the final val ue, prel iminar y v alue and zero band for the full/dri bble batch function.
HV-WP/HW-WP S eries Page 37 13. Simp le Batch Function Caution The parameters of the upp er limit value (HI) and a final value (HI) use the same memory.
Page 38 HV-WP/HW-WP Series 13. Simp le Batch Function Step 6 Press the MODE switch to display the blinkin g HI (of the final val ue). Step 7 Set the fi nal value using the follow ing switches. ∧ switch Sele cting t he numb er of a figure. ＜ switch Selecting a figu re.
HV-WP/HW-WP S eries Page 39 14 . Calibration (Adjustin g Scale) 14. 14. 14. 14. Calibration (Adjusting the Scale) Calibration (Adjusting the Scale) Calibration (Adjusting the Scale) Calibration (Adjusting the Scale) The scale is an i nstrumen t w hic h measures the "w eig ht" and di splay s its "mass" v alue.
Page 40 HV-WP/HW-WP Series 14. Calibra tion (Adjus ting Scale) 14.1.1. 14.1.1. 14.1.1. 14.1.1. The Gravity The Gravity The Gravity The Gravity A A A Ac c el er at i on cceler ation cceler ation ccel eration Table Table Table Table Amsterda m 9.813 m/s 2 Mani la 9.
HV-WP/HW-WP S eries Page 41 14 . Calibration (Adjustin g Scale) 14.2. 14.2. 14.2. 14.2. The The The The Complete Complete Complete Complete Calibration Procedure Calibration Procedu re Calibration Procedu re Calibration Procedu re 14.2.1. 14.2.1. 14.2.
Page 42 HV-WP/HW-WP Series 14. Calibra tion (Adjus ting Scale) 14.2.3. 14.2.3. 14.2.3. 14.2.3. Calibrati on of the Zero Point Calibrati on of the Zero Point Calibrati on of the Zero Point Calibrati on of the Zero Point Step 8 Press and hol d the CAL switch to enter the cali bration m ode aft er display ing normal w eighing for 30 minutes.
HV-WP/HW-WP S eries Page 43 15. T he Function Table 15. 15. 15. 15. The Function Table The Function Table The Function Table The Function Table The function ta ble is t he functi on to store a nd re fer items that det ermine the performanc e of the scale.
Page 44 HV-WP/HW-WP Series 15. T he Funct ion Table 15.2. 15.2. 15.2. 15.2. Parameter List Parameter List Parameter List Parameter List Item Di splay Meaning and pur pose Ａ Turns the displ ay OFF automatical ly.
HV-WP/HW-WP S eries Page 45 15. T he Function Table Item Di splay Meaning and pur pose Ａ f6 5 W hen the displa y value be comes s table , the s cale compa res the display value.
Page 46 HV-WP/HW-WP Series 15. T he Funct ion Table Item Di splay Meaning and pur pose Ａ The detail s of the full/dribble ba tch function ( f6 9 ) Ａ f10 0 # Reaching final v alue and pressing the F switch, the current process is finished .
HV-WP/HW-WP S eries Page 47 16. RS -232 C Seria l In terfa ce 16. 16. 16. 16. RS-232C Serial Interface RS-232C Serial Interface RS-232C Serial Interface RS-232C Serial Interface Note W hen the RS -232C se rial int erfac e is used , be sure to set the " Address ( f11 ) " to "( 00 )" .
Page 48 HV-WP/HW-WP Series 16. RS -232 C Seria l In terfa ce 16.1. 16.1. 16.1. 16.1. Data Format Data Fo rmat Data Fo rmat Data Fo rmat Bit Format Format 1 There are four he aders for the ty pe o f data and w eighing conditi on.
HV-WP/HW-WP S eries Page 49 16. RS -232 C Seria l In terfa ce Format 2 There are four he aders for the ty pe o f data and w eighing conditi on. Stable w eighing data Unstable w eighing data Sta ble c o unt i ng dat a Out of range The wei ghing data co nsists of 7 charact ers inclu d ing decimal poi nt and p olarity .
Page 50 HV-WP/HW-WP Series 16. RS -232 C Seria l In terfa ce 16.2. 16.2. 16.2. 16.2. Stream Mode Stream Mode Stream Mode Stream Mode The scale ou tputs th e current di splay data at the tim e when re freshing the display. The scale do es not outp u t data whil e in the sett ing mode .
HV-WP/HW-WP S eries Page 51 16. RS -232 C Seria l In terfa ce 16.3. 16.3. 16.3. 16.3. Comma nd mod e Comman d mode Comman d mode Comman d mode The comm and mode is the function which can pe rform &quo.
Page 52 HV-WP/HW-WP Series 16. RS -232 C Seria l In terfa ce Preset t are The tare v alue is set and t he net value i s display ed. The net mar k is di splay ed. Template PT, [parameter ] Comma nd Reply Net is displ ayed. Upper lim it value An upper l imit v alue is stored.
HV-WP/HW-WP S eries Page 53 16. RS -232 C Seria l In terfa ce Final value The final value i s stor ed. Template S0, [paramet er] Comma nd Reply The value i s stor ed. Prelimin ary value The preli m inary val ue is stored . Template S1, [paramet er] Comma nd Reply The value i s stor ed.
Page 54 HV-WP/HW-WP Series 16. RS -232 C Seria l In terfa ce 16.3.2. 16.3.2. 16.3.2. 16.3.2. Example o f Se tting Paramet ers Example o f Se tting Paramet ers Example o f Se tting Paramet ers Example o f Se tting Paramet ers Step 1 Turn off th e display .
HV-WP/HW-WP S eries Page 55 17.1. Ext ension ca ble (OP -02) 17. 17. 17. 17. Options Options Options Options 17.1. 17.1. 17.1. 17.1. Extension cable (OP-02) Extension ca ble (OP-02) Extension ca ble (OP-02) Extension ca ble (OP-02) This cab le is used for insta llin g the indicato r away from the base unit.
Page 56 HV-WP/HW-WP Series 17.2. OP -03, Opt ion s 17.2. 17.2. 17.2. 17.2. RS-232C/ Relay output/ Buzzer (OP- 03) RS-232C/ Relay output/ Buzzer (OP- 03) RS-232C/ Relay output/ Buzzer (OP- 03) RS-232C/ Relay output/ Buzzer (OP- 03) Note W hen th e OP-0 3 is us ed, be sure to set th e "A dd ress ( f11 ) " to "( 00 )".
HV-WP/HW-WP S eries Page 57 17.2. OP -03, Opt ion s 17.2.1. 17.2.1. 17.2.1. 17.2.1. Installing the O P-03 Installing the OP-03 Installing the OP-03 Installing the OP-03 Caution Do not pull on the connected cabl es while opening the rear pane l. Step 1 Remove th e plastic p anel from th e option board.
Page 58 HV-WP/HW-WP Series 17.3. OP -04, Opt ion s 17.3. 17.3. 17.3. 17.3. RS-422/ RS-485 / Relay output (OP- 04) RS-422/ RS-485 / Relay output (OP- 04) RS-422/ RS-485 / Relay output (OP- 04) RS-422/ .
HV-WP/HW-WP S eries Page 59 17.3. OP -04, Opt ion s Circuits Selection switch for the RS-4 22/ RS-485 interf ace Selects either of RS- 422 or RS-485 int erface using a sw itch on th e board.
Page 60 HV-WP/HW-WP Series 17.3. OP -04, Opt ion s An exam ple of connection The po laritie s (A,B ) of the host comput er signal depends on th e computer model.
HV-WP/HW-WP S eries Page 61 17.3. OP -04, Opt ion s 17.3.3. 17.3.3. 17.3.3. 17.3.3. Command List Command List Command List Command List The follow ing explanatio n uses "format 1 ( f15 0 )" assuming 23 as the addr ess. Data outp ut The curren t wei ghing data is outp ut.
Page 62 HV-WP/HW-WP Series 17.3. OP -04, Opt ion s Lower limit value A lower limit value is sto red. Template LO, [paramet er] Comma nd Reply The lower limit value is stored. Caution The lower limit value must be l ess than the upper limit v alue. Accu mu lation dat a outp ut The accum ulated data is o utput.
HV-WP/HW-WP S eries Page 63 17.4. OP -13 , OP-1 4, Optio ns 17.4. 17.4. 17.4. 17.4. Rolle r Co nve yor ( OP- 13, OP- 1 4) Ro ller C onve y or (OP- 13, OP- 1 4) Ro ller C onve y or (OP- 13, OP- 1 4) Ro ller C onve y or (OP- 13, OP- 1 4) OP-13 This option can be used with the following products.
Page 64 HV-WP/HW-WP Series 18. Specific ation 18. 18. 18. 18. Specifi cation Specifi cation Specifi cation Specifi cation HV-WP series Product HV-15KV-WP HV-60KV-WP HV-200KV-WP Ａ Ａ W eighing Capacit y [k g] 3 6 15 15 30 60 60 150 220 Ａ Min.
HV-WP/HW-WP S eries Page 65 18. Sp ecification HW-WP se ries Product HW-10KV-WP HW-60KV-WP HW-100KV-WP HW-200KV-WP Ａ Ａ W eighing Capacit y [k g] 10 60 100 220 Ａ Mi n. wei ghing (1 digit) [ g] 1 5 10 20 Ａ W eighing Capacit y [lb] # 20 150 200 500 Ａ Min.
Page 66 HV-WP/HW-WP Series 18. Specific ation Dimens ions.
HV-WP/HW-WP S eries Page 67 18. Sp ecification.
Page 68 HV-WP/HW-WP Series 19. M aintenance 19. 19. 19. 19. Maintena nce Mainte nance Mainte nance Mainte nance Refer to "4. Caution" for use. Refer to "6.1. Display and Symbols " and corresponding mode for displayed error code. Refer to "14.
ﾍﾟｰｼﾞ 1 [ Blank page ].
4.34.25 E_]Wh^_.Fa[Xjajge- P eh^_cW.aj- P eane 281.1124 G>M >K P [b[f^ed[; U92V +4, 64:2.7243 CWm; U92V +4, 64:2.7259 ^iif;00lll /WWdZZ/Ye/`f0 tqv w}xy}ww + y}x r y}us 2666- JY@WdZb[hh Ag_k[- J_bf_iWh- @>/ :6146 Q/O/>/ P [b[f^ed[; U2V +519, 374.
An important point after buying a device A&D HV-15KV-WP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought A&D HV-15KV-WP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data A&D HV-15KV-WP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, A&D HV-15KV-WP you will learn all the available features of the product, as well as information on its operation. The information that you get A&D HV-15KV-WP will certainly help you make a decision on the purchase.
If you already are a holder of A&D HV-15KV-WP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime A&D HV-15KV-WP.
However, one of the most important roles played by the user manual is to help in solving problems with A&D HV-15KV-WP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device A&D HV-15KV-WP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
